feat(usb): add initial ESP32-H4 support in tinyusb

Add `OPT_MCU_ESP32H4` and integrate it into TinyUSB build and
runtime logic. Updates include:

- CMakeLists: add esp32h4 target mapping to `OPT_MCU_ESP32H4`
- tusb_option.h: define `OPT_MCU_ESP32H4`
- tusb_mcu.h, dwc2_esp32.h: extend DWC2 USBIP support
- dcd_esp32sx.c: enable DCD for ESP32-H4
- family.c: include ESP32-H4 in USB init/PHY setup
- idf_component.yml: add esp32h4 to supported targets

This enables TinyUSB examples to build for ESP32-H4 using the
ESP32-Sx USB backend as a base.

Author: igi540

CMakeLists.txt

@@ -1,5 +1,6 @@
 idf_build_get_property(target IDF_TARGET)
 
+
 if(${target} STREQUAL "esp32s3")
     set(tusb_mcu "OPT_MCU_ESP32S3")
     set(tusb_family "esp32sx")
@@ -9,8 +10,14 @@ elseif(${target} STREQUAL "esp32s2")
 elseif(${target} STREQUAL "esp32p4")
     set(tusb_mcu "OPT_MCU_ESP32P4")
     set(tusb_family "esp32px")
+elseif(${target} STREQUAL "esp32h4")
+    set(tusb_mcu OPT_MCU_ESP32H4)
+    set(tusb_family "esp32sx")
 endif()
 
+message(STATUS "tusb_mcu: ${tusb_mcu}")
+message(STATUS "tusb_family: ${tusb_family}")
+
 set(compile_options
     "-DCFG_TUSB_MCU=${tusb_mcu}"
     )

hw/bsp/espressif/boards/family.c

@@ -88,7 +88,7 @@ void board_init(void) {
   gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT);
   gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY);
 
-#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32P4)
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4, OPT_MCU_ESP32P4)
   usb_init();
 #endif
 
@@ -103,7 +103,7 @@ void board_init(void) {
 #endif
 }
 
-#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4)
 
 #endif
 
@@ -158,7 +158,7 @@ int board_getchar(void) {
 // PHY Init
 //--------------------------------------------------------------------
 
-#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32P4)
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4, OPT_MCU_ESP32P4)
 #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 3, 0)
 
 #include "esp_private/usb_phy.h"

idf_component.yml

@@ -1,3 +1,4 @@
+name: tinyusb
 description: TinyUSB ported to Espressif's SoCs
 url: https://docs.tinyusb.org/en/latest/
 documentation: "https://docs.tinyusb.org/en/latest/"
@@ -9,3 +10,4 @@ targets:
   - esp32s2
   - esp32s3
   - esp32p4
+  - esp32h4

src/class/audio/audio_device.c

@@ -82,7 +82,7 @@
 // Only STM32 and dcd_transdimension use non-linear buffer for now
 // dwc2 except esp32sx (since it may use dcd_esp32sx)
 // Ring buffer is incompatible with dcache, since neither address nor size is aligned to cache line
-#if (defined(TUP_USBIP_DWC2) && !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)) || \
+#if (defined(TUP_USBIP_DWC2) && !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4)) || \
     defined(TUP_USBIP_FSDEV) ||                                                     \
     CFG_TUSB_MCU == OPT_MCU_RX63X ||                                                \
     CFG_TUSB_MCU == OPT_MCU_RX65X ||                                                \

src/common/tusb_mcu.h

@@ -363,7 +363,7 @@
 //--------------------------------------------------------------------+
 // Espressif
 //--------------------------------------------------------------------+
-#elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+#elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4)
   #define TUP_USBIP_DWC2
   #define TUP_USBIP_DWC2_ESP32
   #define TUP_DCD_ENDPOINT_MAX    7 // only 5 TX FIFO for endpoint IN

src/portable/espressif/esp32sx/dcd_esp32sx.c

@@ -28,7 +28,7 @@
 
 #include "tusb_option.h"
 
-#if (((CFG_TUSB_MCU == OPT_MCU_ESP32S2) ||  (CFG_TUSB_MCU == OPT_MCU_ESP32S3)) && CFG_TUD_ENABLED)
+#if (((CFG_TUSB_MCU == OPT_MCU_ESP32S2) ||  (CFG_TUSB_MCU == OPT_MCU_ESP32S3) || (CFG_TUSB_MCU == OPT_MCU_ESP32H4)) && CFG_TUD_ENABLED)
 
 // Espressif
 #include "xtensa/xtensa_api.h"
@@ -886,4 +886,4 @@ void dcd_int_disable (uint8_t rhport)
   esp_intr_free(usb_ih);
 }
 
-#endif // #if OPT_MCU_ESP32S2 || OPT_MCU_ESP32S3
+#endif // #if OPT_MCU_ESP32S2 || OPT_MCU_ESP32S3 || OPT_MCU_ESP32H4

src/portable/synopsys/dwc2/dwc2_esp32.h

@@ -39,7 +39,7 @@
 #include "soc/periph_defs.h"
 #include "soc/usb_wrap_struct.h"
 
-#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4)
 #define DWC2_FS_REG_BASE   0x60080000UL
 #define DWC2_EP_MAX        7
 

src/tusb_option.h

@@ -127,6 +127,7 @@
 #define OPT_MCU_ESP32C2           905 ///< Espressif ESP32-C2
 #define OPT_MCU_ESP32H2           906 ///< Espressif ESP32-H2
 #define OPT_MCU_ESP32P4           907 ///< Espressif ESP32-P4
+#define OPT_MCU_ESP32H4           908 ///< Espressif ESP32-H4
 #define TUSB_MCU_VENDOR_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU
 #define TUP_MCU_ESPRESSIF        TUSB_MCU_VENDOR_ESPRESSIF //  for backward compatibility