Describe the bug
Neither set of instructions for installing the f1tenth_gym work correctly. The instructions were taken from https://github.com/f1tenth/f1tenth_gym. There appears to be a problem with f11-gym version 0.19.0, that's referenced from setup.py in the f1tenth_gym master branch.

I tried modifying setup.py from https://github.com/f1tenth/f1tenth_gym to use a more recent version of the gym, the lowest version that passes this step is 0.22.0. However, this causes additional errors, so the fix is something more involved than a version bump to the gym package.

Reproduction using docker
Steps to reproduce:

1. git clone https://github.com/f1tenth/f1tenth_gym.git
2. cd f1tenth_gym
3. docker build -t f1tenth_gym_container -t Dockerfile .
4. Observe

<<< SNIP >>>
WARNING: Ignoring version 0.19.0 of gym since it has invalid metadata:
Requested gym==0.19.0 from https://files.pythonhosted.org/packages/af/f5/958aa7f6f5b685896dbddf7436d06755bf23b12c65889b156566dd06c514/gym-0.19.0.tar.gz (from f110-gym==0.2.1) has invalid metadata: Expected end or semicolon (after version specifier)
opencv-python>=3.
~~~^
Please use pip<24.1 if you need to use this version.
INFO: pip is looking at multiple versions of f110-gym to determine which version is compatible with other requirements. This could take a while.
ERROR: Could not find a version that satisfies the requirement gym==0.19.0 (from f110-gym) (from versions: 0.0.2, 0.0.3, 0.0.4, 0.0.5, 0.0.6, 0.0.7, 0.1.0, 0.1.1, 0.1.2, 0.1.3, 0.1.4, 0.1.5, 0.1.6, 0.1.7, 0.2.0, 0.2.1, 0.2.2, 0.2.3, 0.2.4, 0.2.5, 0.2.6, 0.2.7, 0.2.8, 0.2.9, 0.2.10, 0.2.11, 0.2.12, 0.3.0, 0.4.0, 0.4.1, 0.4.2, 0.4.3, 0.4.4, 0.4.5, 0.4.6, 0.4.8, 0.4.9, 0.4.10, 0.5.0, 0.5.1, 0.5.2, 0.5.3, 0.5.4, 0.5.5, 0.5.6, 0.5.7, 0.6.0, 0.7.0, 0.7.1, 0.7.2, 0.7.3, 0.7.4, 0.8.0.dev0, 0.8.0, 0.8.1, 0.8.2, 0.9.0, 0.9.1, 0.9.2, 0.9.3, 0.9.4, 0.9.5, 0.9.6, 0.9.7, 0.10.0, 0.10.1, 0.10.2, 0.10.3, 0.10.4, 0.10.5, 0.10.8, 0.10.9, 0.10.11, 0.11.0, 0.12.0, 0.12.1, 0.12.4, 0.12.5, 0.12.6, 0.13.0, 0.13.1, 0.14.0, 0.15.3, 0.15.4, 0.15.6, 0.15.7, 0.16.0, 0.17.0, 0.17.1, 0.17.2, 0.17.3, 0.18.0, 0.18.3, 0.19.0, 0.20.0, 0.21.0, 0.22.0, 0.23.0, 0.23.1, 0.24.0, 0.24.1, 0.25.0, 0.25.1, 0.25.2, 0.26.0, 0.26.1, 0.26.2)
ERROR: No matching distribution found for gym==0.19.0
The command '/bin/sh -c cd /f1tenth_gym && pip3 install -e .' returned a non-zero code: 1`

Expected behavior
A successful installation of a docker container for the gym.

Reproduction using PIP

1. mkdir gymenv
2. cd gymenv
3. virtualenv .
4. source bin/activate
5. git clone https://github.com/f1tenth/f1tenth_gym.git
6. cd f1tenth_gym
7. Observe

Collecting gym==0.19.0 (from f110_gym==0.2.1)
Using cached gym-0.19.0.tar.gz (1.6 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... error
error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> [3 lines of output]
/tmp/pip-build-env-nomrz7fv/overlay/lib/python3.12/site-packages/setuptools/_distutils/dist.py:268: UserWarning: Unknown distribution option: 'tests_require'
warnings.warn(msg)
error in gym setup command: 'extras_require' must be a dictionary whose values are strings or lists of strings containing valid project/version requirement specifiers.
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

Desktop (please complete the following information):

• OS: Linux Gentoo
• Docker: 26.1.0