- 1 Put the exhaust at the window
- 2 switch on the filter
- 3 switch on the compressor
- 4 switch on the laser cutter
- 5 go to the computer (if login = "lopenlab")
- 6 to cut put the stroke width "<0.1"
- 7 click on print ("ctrl+p")
- 8 click on preferences
- 9 choose "avancée" select the good parameters according to the material
- 10 Calibrate with 0% power.
- 10 if ok, print
- 11 click the green button on the laser cuter to print
- 1 clean the laser lens (4: 2 top, 2 bottom)
- 2 vacuum the material residue
- 3 switch off the compressor, the laser cutter and the compressor, and filter