When changing publication interval, PM sensor is not read the first time

[oscgonfer]

SCK > config -pubint 3000
ESP finished booting
-- New config --

Mode: network
Publish interval (s): 3000
Reading interval (s): 60
Wifi credentials: XXX - YYY
Token: AAAAAA
Sanity reset (every 24 hours) is: on
SCK > Connecting to Wifi...

SCK > 
SCK > Connected to wifi!!- RSSI: -62
Hello sent!
Hello OK!!
Info sent!
Info publish OK!!

-----------
2025-01-16T14:04:34Z
-----------

SCK > 
SCK > reset
Bye!!

After the reset (note the weird readings again):

Asked new time sync to ESP...
RTC updated: 2025-01-16T14:04:48Z
Info sent!
Info publish OK!!

-----------
2025-01-16T14:04:49Z
Temperature: 21.80 C
Humidity: 37.21 %
Ext SHT35 Temperature: 22.56 C
Ext SHT35 Humidity: 36.80 %
Battery: 100 %
SD card: 1 Present
ESP finished booting
RSSI interval must be the same as publish interval!!
correcting it to 3000
WiFi RSSI: -61 dBm
Light: 265 lux
Noise dBA: 43.09 dBA
MPL Barometric pressure: 102.60 kPa
AS7331 UVA: 1.60 uW/cm2
AS7331 UVB: 0.10 uW/cm2
AS7331 UVC: 0.14 uW/cm2
Connecting to Wifi...
Connected to wifi!!- RSSI: -64
Hello sent!
Hello OK!!
Info sent!
Info publish OK!!

-----------
2025-01-16T14:04:55Z
Light: 253 lux
Noise dBA: 47.91 dBA
MPL Barometric pressure: 102.61 kPa
AS7331 UVA: 1.52 uW/cm2
AS7331 UVB: 0.10 uW/cm2
AS7331 UVC: 0.14 uW/cm2
-----------

Further down the line:

-----------
2025-01-16T14:07:55Z
Temperature: 22.58 C
Humidity: 35.99 %
Ext SHT35 Temperature: 22.56 C
Ext SHT35 Humidity: 36.87 %
Battery: 99 %
SD card: 1 Present
Light: 214 lux
Noise dBA: 47.66 dBA
MPL Barometric pressure: 102.64 kPa
AS7331 UVA: 1.75 uW/cm2
AS7331 UVB: 0.10 uW/cm2
AS7331 UVC: 0.14 uW/cm2
-----------
(2025-01-16T14:07:55Z) Readings saved to flash memory.
(2025-01-16T14:07:55Z) 12 readings saved to sdcard.
Connecting to Wifi...
ESP finished booting
Connecting to Wifi...
Connected to wifi!!- RSSI: -61
(2025-01-16T14:07:55Z) Sent readings to platform.
Network publish OK!! (12 readings)

-----------
2025-01-16T14:08:55Z
Temperature: 22.73 C
Humidity: 35.68 %
Ext SHT35 Temperature: 22.59 C
Ext SHT35 Humidity: 36.70 %
Battery: 99 %
SD card: 1 Present
Light: 186 lux
Noise dBA: 46.22 dBA
MPL Barometric pressure: 102.62 kPa
SEN5X PM 1.0: 5.80 ug/m3
SEN5X PM 2.5: 6.10 ug/m3
SEN5X PM 4.0: 6.10 ug/m3
SEN5X PM 10.0: 6.10 ug/m3
SEN5X PN 0.5: 3890.00 #/0.1l
SEN5X PN 1.0: 4520.00 #/0.1l
SEN5X PN 2.5: 4540.00 #/0.1l
SEN5X PN 4.0: 4540.00 #/0.1l
SEN5X PN 10.0: 4540.00 #/0.1l
SEN5X Typical Particle Size: 46.00 um
AS7331 UVA: 1.60 uW/cm2
AS7331 UVB: 0.10 uW/cm2
AS7331 UVC: 0.10 uW/cm2
-----------
(2025-01-16T14:08:55Z) Readings saved to flash memory.
(2025-01-16T14:08:55Z) 22 readings saved to sdcard.
Connecting to Wifi...
ESP finished booting
Connecting to Wifi...
Connected to wifi!!- RSSI: -60
(2025-01-16T14:08:55Z) Sent readings to platform.
Network publish OK!! (22 readings)

After this, it all seems OK.