warnings fixing part 2

Author: piotrkluba

docs/01.introduction/03.workbench-layout/04.top-bar.md

@@ -69,7 +69,7 @@
 
 *Create an extension of a case based on current configuration.*
 
-- See [Forking section](../05.project-tree.md#️-forking) in the [Project tree](../05.project-tree.md) documentation for more information.
+- See [Forking section](../05.project-tree.md#forking) in the [Project tree](../05.project-tree.md) documentation for more information.
 
 ---
 

docs/01.introduction/03.workbench-layout/06.entities-browser/03.volume-mesh/01.zones.md

@@ -10,8 +10,8 @@ These zones contain within them [boundaries](./02.boundaries.md), which are used
 
 Zones can be assigned one of three types of 3D models:
 
-- [Rotation](/docs/02.simulation-setup/03.flow-solver/03.physics/03.rotation.md)
-- [Solid](/docs/02.simulation-setup/03.flow-solver/03.physics/02.solid/README.md)
-- [Porous medium](/docs/02.simulation-setup/03.flow-solver/03.physics/06.porous-medium.md)
+- [Rotation](../../../../02.simulation-setup/03.flow-solver/03.physics/03.rotation.md)
+- [Solid](../../../../02.simulation-setup/03.flow-solver/03.physics/02.solid/README.md)
+- [Porous medium](../../../../02.simulation-setup/03.flow-solver/03.physics/06.porous-medium.md)
 
-It is also worth noting that all zones that are not assigned as a solid zone, will be considered a [fluid](/docs/02.simulation-setup/03.flow-solver/03.physics/01.fluid/README.md) zone.
+It is also worth noting that all zones that are not assigned as a solid zone, will be considered a [fluid](../../../../02.simulation-setup/03.flow-solver/03.physics/01.fluid/README.md) zone.

docs/01.introduction/03.workbench-layout/06.entities-browser/03.volume-mesh/02.boundaries.md

@@ -8,15 +8,15 @@ Boundaries for a volume mesh exist within their parent [zones](./01.zones.md).
 
 ## **Types of boundary conditions**
 
-Boundaries can be assigned one of the following [Boundary conditions](/docs/02.simulation-setup/03.flow-solver/01.boundary-conditions/README.md):
+Boundaries can be assigned one of the following [Boundary conditions](../../../../02.simulation-setup/03.flow-solver/01.boundary-conditions/README.md):
 
-- [Wall](/docs/02.simulation-setup/03.flow-solver/01.boundary-conditions/01.wall.md)
+- [Wall](../../../../02.simulation-setup/03.flow-solver/01.boundary-conditions/01.wall.md)
 - [Freestream](/docs/02.simulation-setup/03.flow-solver/01.boundary-conditions/02.freestream.md)
-- [Inflow](/docs/02.simulation-setup/03.flow-solver/01.boundary-conditions/03.inflow.md)
-- [Outflow](/docs/02.simulation-setup/03.flow-solver/01.boundary-conditions/04.outflow.md)
-- [Periodic](/docs/02.simulation-setup/03.flow-solver/01.boundary-conditions/05.periodic.md)
-- [Symmetry](/docs/02.simulation-setup/03.flow-solver/01.boundary-conditions/06.symmetry.md)
-- [Slip wall](/docs/02.simulation-setup/03.flow-solver/01.boundary-conditions/07.slip-wall.md)
+- [Inflow](../../../../02.simulation-setup/03.flow-solver/01.boundary-conditions/03.inflow.md)
+- [Outflow](../../../../02.simulation-setup/03.flow-solver/01.boundary-conditions/04.outflow.md)
+- [Periodic](../../../../02.simulation-setup/03.flow-solver/01.boundary-conditions/05.periodic.md)
+- [Symmetry](../../../../02.simulation-setup/03.flow-solver/01.boundary-conditions/06.symmetry.md)
+- [Slip wall](../../../../02.simulation-setup/03.flow-solver/01.boundary-conditions/07.slip-wall.md)
 - Interface (assigned automaticaly)
 
 ## **Boundaries in outputs**

docs/01.introduction/03.workbench-layout/06.entities-browser/04.volumes.md

@@ -1,6 +1,6 @@
 # Volumes
 
-*Volume entities in Flow360 are used to set up [volume zones](./../../02.simulation-setup/02.meshing/02.volume-zone.md), [local refinements](./../../02.simulation-setup/02.meshing/03.refinements/README.md) and [3D models](./../../02.simulation-setup/05.models/02.3d-models/README.md). Flow360 provides two primary volume primitives: boxes and cylinders.*
+*Volume entities in Flow360 are used to set up volume zones, [local refinements](../../../02.simulation-setup/02.mesh/03.refinements/README.md) and [3D models](../../../02.simulation-setup/03.flow-solver/03.physics/README.md). Flow360 provides two primary volume primitives: boxes and cylinders.*
 
 ---
 

docs/02.simulation-setup/04.output/02.outputs-list/01.volume-output.md

@@ -75,7 +75,7 @@
 
 ## **Available Output Fields**
 
-Variables from [Available Output Fields](./README.md#available-output-fields) and the following specific variables
+Variables from [Available Output Fields](README.md#available-output-fields) and the following specific variables
 
 ### **Volume-Specific Variables** (non-dimensional)
 
@@ -104,7 +104,7 @@ The `qcriterion` field is extremely valuable for visualizing vortices in the flo
 - Smaller values show more vortical structures but may clutter visualization
 - Larger values show only the strongest vortices
 
-> **Note**: Q-criterion can also be directly exported as an isosurface with a specific iso value using the [Isosurface Output](10.isosurface-output.md) feature, which provides better control over the visualization.
+> **Note**: Q-criterion can also be directly exported as an isosurface with a specific iso value using the [Isosurface Output](./11.isosurface-output.md) feature, which provides better control over the visualization.
 
 ### BET Visualization
 

docs/02.simulation-setup/04.output/02.outputs-list/15.streamline-output.md

@@ -18,7 +18,7 @@
 
 *Points that define the placement of streamlines. The Streamline is a path of a particle that passes through a given point.*
 
-- **Point Definition:** The creation of points is described in detail [here](/docs/01.introduction/03.workbench-layout/06.entities-browser/05.points.md)
+- **Point Definition:** The creation of points is described in detail [here](../../../01.introduction/03.workbench-layout/06.entities-browser/05.points.md)
 
 >**Notes:** 
 > - You can specify individual points or arrays of points to seed streamlines at multiple locations. 

docs/03.analysis/04.visualization.md

@@ -23,7 +23,7 @@
 
 **Available Fields:**
 
-Selectable fields depend on the surface output configuration in simulation settings. For a complete list, refer to [surface output](../02.simulation-setup/04.output/02.output-list/03.surface-output.md).
+Selectable fields depend on the surface output configuration in simulation settings. For a complete list, refer to [surface output](../02.simulation-setup/04.output/02.outputs-list/03.surface-output.md).
 
 ---
 
@@ -33,7 +33,7 @@ Selectable fields depend on the surface output configuration in simulation setti
 
 **Available Fields:**
 
-Selectable fields depend on the slice output configuration. For a complete list, refer to [slice output](../02.simulation-setup/04.output/02.output-list/05.slice-output.md).
+Selectable fields depend on the slice output configuration. For a complete list, refer to [slice output](../02.simulation-setup/04.output/02.outputs-list/05.slice-output.md).
 
 ---
 
@@ -43,7 +43,7 @@ Selectable fields depend on the slice output configuration. For a complete list,
 
 **Available Fields:**
 
-Selectable fields depend on the isosurface output configuration. For a complete list, refer to [isosurface output](../02.simulation-setup/04.output/02.output-list/11.isosurface-output.md).
+Selectable fields depend on the isosurface output configuration. For a complete list, refer to [isosurface output](../02.simulation-setup/04.output/02.outputs-list/11.isosurface-output.md).
 
 ### **Streamline Visualisation**
 

docs/README.md

@@ -6,7 +6,7 @@ Content:
     -   [Starting a Project](./01.introduction/02.starting-project.md)
     -   [Workbench Layout](./01.introduction/03.workbench-layout/README.md)
     -   [General Workflow](./01.introduction/04.general-workflow.md)
-    -   [Project Tree](./01.introduction/05.project-tree/README.md)
+    -   [Project Tree](./01.introduction/05.project-tree.md)
 -   [Simulation Setup](./02.simulation-setup/README.md)
     -   [Flow conditions](./02.simulation-setup/01.flow-conditions/README.md)
     -   [Mesh](./02.simulation-setup/02.mesh/README.md)