PSA Car Controller stopped fetching Charge data

[buijsp]

I run the latest version 3.5.6 on a Raspi in Docker
Beginning with 3.5.3 in january 2025 it was running fine ever since.
But now the Charge data does not update any more, since 30-6-2025
Trips data is still updated.
The Refresh button under Control does not work either and is also stuck at 30-6
Any idea where to look?
Peter

[martni]

I have the same issue. I tried to reauthenticate it, but it didn't help. A couple of days ago, my "My Citroën app" sent a message that a new service, "My Trip Report" was available, and I activated it. After that, my HA started to show trip info with GPS data and a map again, but still no charging info.

Also, in My Trip Report, a new energy consumption row appears, but it's blank (with no data).

Mart

[bmatti996]

me too

[buijsp]

In the log file I found a lot of Database Locked errors. It seems that the 3.5.6 Docker image has some problems.
Also see #1069

[bmatti996]

my car keeps disconnecting from the psa server, i have a citroen ec4

[Speck81]

Same problem here, both with 3.5.3 and 3.5.6 it stopped receiving charging data on 30/06/2025
I can still receive trips data correctly, but the update time on the CONTROL tab is stopped at 30-06

bye,
Speck

[InJotec]

Hi, I have the same problem, the charge data and control tab stopped on 30/6/2025 at 22:09 and has not updated data again, except for the trips, those are updated, just like the SOC or km data. Is there no proposed solution?

I see this in the log:

2025-07-30 12:10:45,234 :: INFO :: subscribe to psa/RemoteServices/to/cid/OV-ACNT200014002394/#
2025-07-30 12:10:45,234 :: INFO :: subscribe to psa/RemoteServices/events/MPHRTServices/Vin_number
2025-07-30 12:10:45,235 :: WARNING :: Disconnected with result code 5
2025-07-30 12:10:45,235 :: WARNING :: The connection was refused.

I have checked and my app account shows that my Remote Service subscription is active, but I still get this error.

[japyjaap]

Hi, the same problem here. Charging data stopped at 30/06/2025. Trip data is correct and actual. My SoC and mileage on the control tab seems to be correct, although the last refresh shows 30/06/2025.

[smartHA67]

I have the same issue charging data stopped even at 29/6/2025 not reporting the charging end data in info.db but mileage and SOC are still OK.

[Hotzi57]

Auch bei mir, keine Ladedaten mehr seit 30.6.25 für meine Peugeot.

[kosi2801]

For those who are technically versed it's possible to replace the energy.py with the one from #1096 (see #1096 (comment)) to fix this issue.

[Hotzi57]

Wie kann ich Version3.5.7 in HA updaten?

[kosi2801]

@Hotzi57 It depends on how you have installed it in the first place and connected it to HomeAssistant.
I personally have it installed via Portainer and use the docker-image flobz/psa_car_controller:latest so for me it was just a simple redeploy.

• If you have it deployed via Docker and use a specific tag, then you have to either update and redeploy with the latest tag, ie. 3.5.7 or use also the latest tag.
• If you have it checked out from github manually then you should just be ok with pulling the latest update from github.
• If you have it installed via the flobz/psacc-ha then you have to be a bit more patient, the request to update the version on that plugin has just been filed yesterday as request #59. When that one is done by flobz then I think HomeAssistant should show you the available update just shortly after.

In case you have installed/connected this psa_car_controller any other way, I'm afraid I'm unable to give any advice, but maybe one of the installation guides can be of help there.

[Hotzi57]

Vielen Dank, da muss ich mich gedulden, ich habe es über das flobz/psacc-ha installiert, denke ich. Gruß, Andreas

…

________________________________ Von: kosi2801 ***@***.***> Gesendet: Montag, 25. August 2025 15:00 An: flobz/psa_car_controller ***@***.***> Cc: Hotzi57 ***@***.***>; Mention ***@***.***> Betreff: Re: [flobz/psa_car_controller] PSA Car Controller stopped fetching Charge data (Discussion #1103) @Hotzi57<https://github.com/Hotzi57> It depends on how you have installed it in the first place and connected it to HomeAssistant. I personally have it installed via Portainer and use the docker-image flobz/psa_car_controller:latest so for me it was just a simple redeploy. * If you have it deployed via Docker and use a specific tag, then you have to either update and redeploy with the latest tag, ie. 3.5.7 or use also the latest tag. * If you have it checked out from github manually then you should just be ok with pulling the latest update from github. * If you have it installed via the flobz/psacc-ha<https://github.com/flobz/psacc-ha> then you have to be a bit more patient, the request to update the version on that plugin has just been filed yesterday as request #59<flobz/psacc-ha#59>. When that one is done by flobz then I think HomeAssistant should show you the available update just shortly after. In case you have installed/connected this psa_car_controller any other way, I'm afraid I'm unable to give any advice, but maybe one of the installation guides<https://github.com/flobz/psa_car_controller?tab=readme-ov-file#i-installation> can be of help there. — Reply to this email directly, view it on GitHub<#1103 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BFPRQOJIESFVPVHPIVLVQOT3PMCH5AVCNFSM6AAAAACBQDWE4KVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTIMRRGA2DKMI>. You are receiving this because you were mentioned.Message ID: ***@***.***>