Skip to content

Latest commit

 

History

History
434 lines (328 loc) · 23.6 KB

基于移动平均线的趋势跟随策略Trend-Following-Strategy-Based-on-Moving-Average.md

File metadata and controls

434 lines (328 loc) · 23.6 KB

Name

基于移动平均线的趋势跟随策略Trend-Following-Strategy-Based-on-Moving-Average

Author

ChaoZhang

Strategy Description

IMG [trans]

概述

该策略是一个基于移动平均线的简单趋势跟随策略。它通过比较不同周期的移动平均线的大小关系来判断目前的趋势方向,以及判断趋势的持续时间。当短周期均线由下向上穿过长周期均线时做多,当短周期均线由上向下穿过长周期均线时做空。同时,策略还设定了止损点和止盈点来控制风险。

策略原理

该策略使用4条不同周期的移动平均线:5日线、10日线、15日线和25日线。这4条均线被称为MA1、MA2、MA3和MA4。其中,MA1最短,MA4最长。

当MA1>MA2>MA3>MA4时,说明价格处于上升趋势,这时做多;当MA1<MA2<MA3<MA4时,说明价格处于下降趋势,这时做空。

做多和做空的开仓条件还需要同时满足ATR止损过滤器,即ATR值要大于ATR的40周期简单移动平均,这可以避免价格震荡过小时发出错误信号。

策略优势

该策略具有以下优势:

  1. 思路简单易懂,容易实施。
  2. 利用多组移动平均线判断趋势方向可靠。
  3. 设定止盈止损点,可以有效控制单次交易最大损失。
  4. ATR止损过滤可避免价格震荡过小时发出错误信号。

风险分析

该策略也存在以下风险:

  1. 大幅震荡市场中容易产生错误信号。
  2. 参数设置(均线周期等)不当可能导致策略效果不佳。
  3. 没有考虑基本面和重大消息对价格的影响。

为了降低这些风险,可以适当优化参数,或增加其他过滤器条件来提高策略稳定性。

优化方向

该策略的优化方向有:

  1. 测试不同的移动平均线周期参数组合,寻找最佳参数。
  2. 增加其他技术指标过滤器,如MACD,KDJ等判断信号可靠性。
  3. 增加交易量过滤,只在交易量放大的情况下进行交易。
  4. 根据不同品种参数差异进行细致分品种参数优化。
  5. 增加机器学习算法判断信号。

总结

该策略整体是一个较为简单的趋势跟随策略,通过移动平均线判断趋势方向,设定合理的止盈止损来控制风险水平。策略优化空间还很大,通过参数调整、增设过滤器等手段可以进一步提高策略稳定性和盈利能力。

||

Overview

This is a simple trend following strategy based on moving average. It judges the current trend direction and duration by comparing the size relationship between moving averages of different cycles. It goes long when the short cycle moving average crosses above the long cycle one, and goes short when the opposite happens. At the same time, stop loss and take profit points are set to control risks.

Strategy Logic

The strategy uses 4 moving averages with different cycles: 5-day, 10-day, 15-day and 25-day lines. They are called MA1, MA2, MA3 and MA4. Among them, MA1 is the shortest and MA4 is the longest.

When MA1>MA2>MA3>MA4, it indicates an upward trend and goes long. When MA1<MA2<MA3<MA4, it indicates a downward trend and goes short.

The open position conditions for both long and short need to satisfy the ATR stop loss filter at the same time, that is, the ATR value should be greater than the 40-day SMA of ATR. This avoids generating wrong signals when the price fluctuation is too small.

Advantage Analysis

The strategy has the following advantages:

  1. The logic is simple and easy to implement.
  2. Using multiple moving averages to determine the trend direction is reliable.
  3. Setting stop loss and take profit points can effectively control the maximum loss per trade.
  4. The ATR stop loss filter avoids wrong signals when the price fluctuation is small.

Risk Analysis

The strategy also has the following risks:

  1. It is easy to generate wrong signals in a largely shock market.
  2. Improper parameter settings (cycle of moving average, etc) may lead to poor strategy performance.
  3. It does not consider the impact of fundamentals and significant news on prices.

To reduce these risks, parameters can be optimized appropriately, or additional filter conditions can be added to improve strategy stability.

Optimization Directions

The optimization directions of the strategy include:

  1. Test different combinations of moving average cycle parameters to find the optimal parameters.
  2. Add other technical indicators filters such as MACD and KDJ to judge the reliability of signals.
  3. Add trading volume filter, only trade when trading volume expands.
  4. Fine-tune parameters based on differences between varieties.
  5. Add machine learning algorithms to judge signals.

Conclusion

In general, this is a relatively simple trend following strategy. It judges the trend direction through moving averages and sets reasonable stop loss and take profit to control risk levels. There is still much room for optimization, such as adjusting parameters, adding filters etc. to further improve the stability and profitability of the strategy.

[/trans]

Strategy Arguments

Argument Default Description
v_input_1 timestamp(20 Jan 1990 00:00 +0900) (?Time)Start Date
v_input_2 timestamp(20 Dec 2030 00:00 +0900) End Date
v_input_bool_1 true (?Long / Short)Long?
v_input_bool_2 true Short?
v_input_bool_3 true (?Filters)ATR Filter On?
v_input_int_1 40 SMA Length for ATR SMA
v_input_bool_4 true (?Shared Inputs)Enable SL & TP?
v_input_bool_5 false Enable Trailing SL?
v_input_string_1 0 Stop Loss Type: ATR
v_input_int_2 14 ATR Length
v_input_string_2 0 Take Profit Type: R:R
v_input_float_1 50 Take Profit Quantity %
v_input_float_2 3 (?Long Stop Loss / Take Profit)SL Percent
v_input_float_3 3 TP Percent
v_input_float_4 3 SL ATR Multiplier
v_input_float_5 3 TP ATR Multiplier
v_input_float_6 1.8 R:R Ratio
v_input_float_7 3 (?Short Stop Loss / Take Profit)SL Percent
v_input_float_8 3 TP Percent
v_input_float_9 3 SL ATR Multiplier
v_input_float_10 3 TP ATR Multiplier
v_input_float_11 1.8 R:R Ratio
v_input_string_3 0 (?Strategy)MA Type: RMA
v_input_int_3 5 MA 1 Length
v_input_int_4 10 MA 2 Length
v_input_int_5 15 MA 3 Length
v_input_int_6 25 MA 4 Length
v_input_float_12 0.7 ALMA Offset Value
v_input_float_13 7 ALMA Sigma Value

Source (PineScript)

/*backtest
start: 2023-01-17 00:00:00
end: 2024-01-23 00:00:00
period: 1d
basePeriod: 1h
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © fpemehd
// @version=5

// # ========================================================================= #
// #                   |   STRATEGY  |
// # ========================================================================= #

strategy(title = 'MA Simple Strategy with SL & TP & ATR Filters',
      shorttitle = 'MA Strategy',
      overlay = true,
      pyramiding = 0,
      default_qty_type = strategy.percent_of_equity,
      default_qty_value = 100,
      commission_type  = strategy.commission.percent,
      commission_value = 0.1,
      initial_capital = 100000,
      max_lines_count = 150,
      max_labels_count = 300)

// # ========================================================================= #
// #                          Inputs
// # ========================================================================= #

// 1. Time
i_start = input (defval = timestamp("20 Jan 1990 00:00 +0900"), title = "Start Date", tooltip = "Choose Backtest Start Date", inline = "Start Date", group = "Time" ) 
i_end = input (defval = timestamp("20 Dec 2030 00:00 +0900"), title = "End Date", tooltip = "Choose Backtest End Date", inline = "End Date", group = "Time" ) 
c_timeCond = true

// 2. Inputs for direction: Long? Short? Both? 
i_longEnabled = input.bool(defval = true , title = "Long?", tooltip = "Enable Long Position Trade?", inline = "Long / Short", group = "Long / Short" )
i_shortEnabled = input.bool(defval = true , title = "Short?", tooltip = "Enable Short Position Trade?", inline = "Long / Short", group = "Long / Short" )

// 3. Use Filters? What Filters?
i_ATRFilterOn = input.bool(defval = true , title = "ATR Filter On?", tooltip = "ATR Filter On?", inline = "ATR Filter", group =  "Filters") 
i_ATRSMALen = input.int(defval = 40 , title = "SMA Length for ATR SMA", minval = 1 , maxval = 100000 , step = 1 , tooltip = "ATR should be bigger than this", inline = "ATR Filter", group = "Filters") 

// 3. Shared inputs for Long and Short
//// 3-1. Inputs for Stop Loss Type: normal? or trailing? 
//// If trailing, always trailing or trailing after take profit order executed?
i_useSLTP = input.bool(defval =  true, title = "Enable SL & TP?", tooltip = "", inline = "Enable SL & TP & SL Type", group = "Shared Inputs") 
i_tslEnabled = input.bool(defval = false , title = "Enable Trailing SL?", tooltip = "Enable Stop Loss & Take Profit? \n\Enable Trailing SL?", inline = "Enable SL & TP & SL Type", group = "Shared Inputs") 
// i_tslAfterTP = input.bool(defval = true , title = "Enable Trailing SL after TP?", tooltip = "Enable Trailing SL after TP?", inline = "Trailing SL Execution", group = "Shared Inputs") 
i_slType = input.string(defval = "ATR", title = "Stop Loss Type", options = ["Percent", "ATR"], tooltip = "Stop Loss based on %? ATR?", inline = "Stop Loss Type", group = "Shared Inputs") 
i_slATRLen = input.int(defval = 14, title = "ATR Length", minval = 1 , maxval = 200 , step = 1, inline = "Stop Loss ATR", group = "Shared Inputs")  
i_tpType = input.string(defval = "R:R", title = "Take Profit Type", options = ["Percent", "ATR", "R:R"], tooltip = "Take Profit based on %? ATR? R-R ratio?", inline = "Take Profit Type", group = "Shared Inputs") 

//// 3-2. Inputs for Quantity
i_tpQuantityPerc = input.float(defval = 50, title = 'Take Profit Quantity %', minval = 0.0, maxval = 100, step = 1.0, tooltip = '% of position when tp target is met.', group = 'Shared Inputs')

// 4. Inputs for Long Stop Loss & Long Take Profit

i_slPercentLong = input.float(defval = 3, title = "SL Percent", tooltip = "", inline = "Percent > Long Stop Loss / Take Profit Percent", group = "Long Stop Loss / Take Profit") 
i_tpPercentLong = input.float(defval = 3, title = "TP Percent", tooltip = "Long Stop Loss && Take Profit Percent?", inline = "Percent > Long Stop Loss / Take Profit Percent", group = "Long Stop Loss / Take Profit") 
i_slATRMultLong = input.float(defval = 3, title = "SL ATR Multiplier", minval = 1 , maxval = 200 , step = 0.1, tooltip = "", inline = "Long Stop Loss / Take Profit ATR", group = "Long Stop Loss / Take Profit") 
i_tpATRMultLong = input.float(defval = 3, title = "TP ATR Multiplier", minval = 1 , maxval = 200 , step = 0.1, tooltip = "ATR > Long Stop Loss && Take Profit ATR Multiplier? \n\Stop Loss = i_slATRMultLong * ATR (i_slATRLen) \n\Take Profit = i_tpATRMultLong * ATR (i_tpATRLen)", inline = "Long Stop Loss / Take Profit ATR", group = "Long Stop Loss / Take Profit") 
i_tpRRratioLong = input.float(defval = 1.8, title = "R:R Ratio", minval = 0.1 , maxval = 200 , step = 0.1, tooltip = "R:R Ratio > Risk Reward Ratio? It will automatically set Take Profit % based on Stop Loss", inline = "R:R Ratio", group = "Long Stop Loss / Take Profit") 

// 5. Inputs for Short Stop Loss & Short Take Profit
i_slPercentShort = input.float(defval = 3, title = "SL Percent", tooltip = "", inline = "Percent > Short Stop Loss / Take Profit Percent", group = "Short Stop Loss / Take Profit") 
i_tpPercentShort = input.float(defval = 3, title = "TP Percent", tooltip = "Short Stop Loss && Take Profit Percent?", inline = "Percent > Short Stop Loss / Take Profit Percent", group = "Short Stop Loss / Take Profit") 
i_slATRMultShort = input.float(defval = 3, title = "SL ATR Multiplier", minval = 1 , maxval = 200 , step = 0.1, tooltip = "", inline = "ATR > Short Stop Loss / Take Profit ATR", group = "Short Stop Loss / Take Profit") 
i_tpATRMultShort = input.float(defval = 3, title = "TP ATR Multiplier", minval = 1 , maxval = 200 , step = 0.1, tooltip = "ATR > Short Stop Loss && Take Profit ATR Multiplier? \n\Stop Loss = i_slATRMultShort * ATR (i_slATRLen) \n\Take Profit = i_tpATRMultShort * ATR (i_tpATRLen)", inline = "ATR > Short Stop Loss / Take Profit ATR", group = "Short Stop Loss / Take Profit") 
i_tpRRratioShort = input.float(defval = 1.8, title = "R:R Ratio", minval = 0.1 , maxval = 200 , step = 0.1, tooltip = "R:R Ratio > Risk Reward Ratio? It will automatically set Take Profit % based on Stop Loss", inline = "R:R Ratio", group = "Short Stop Loss / Take Profit") 

// 6. Inputs for logic
i_MAType = input.string(defval = "RMA", title = "MA Type", options = ["SMA", "EMA", "WMA", "HMA", "RMA", "VWMA", "SWMA", "ALMA", "VWAP"], tooltip = "Choose MA Type", inline = "MA Type", group = 'Strategy') 
i_MA1Len = input.int(defval = 5, title = 'MA 1 Length', minval = 1, inline = 'MA Length', group = 'Strategy')
i_MA2Len = input.int(defval = 10, title = 'MA 2 Length', minval = 1, inline = 'MA Length', group = 'Strategy')
i_MA3Len = input.int(defval = 15, title = 'MA 3 Length', minval = 1, inline = 'MA Length', group = 'Strategy')
i_MA4Len = input.int(defval = 25, title = 'MA 4 Length', minval = 1, inline = 'MA Length', group = 'Strategy')
i_ALMAOffset = input.float(defval = 0.7 , title = "ALMA Offset Value", tooltip = "The Value of ALMA offset", inline = "ALMA Input", group = 'Strategy')
i_ALMASigma = input.float(defval = 7 , title = "ALMA Sigma Value", tooltip = "The Value of ALMA sigma", inline = "ALMA Input", group = 'Strategy')

// # ========================================================================= #
// #                          Entry, Close Logic
// # ========================================================================= #

bool i_ATRFilter = ta.atr(length = i_slATRLen) >= ta.sma(source = ta.atr(length = i_slATRLen), length = i_ATRSMALen) ? true : false

// calculate Technical Indicators for the Logic

getMAValue (source, length, almaOffset, almaSigma) => 
    switch i_MAType 
        'SMA' => ta.sma(source = source, length = length) 
        'EMA' => ta.ema(source = source, length = length) 
        'WMA' => ta.wma(source = source, length = length) 
        'HMA' => ta.hma(source = source, length = length) 
        'RMA' => ta.rma(source = source, length = length) 
        'SWMA' => ta.swma(source = source) 
        'ALMA' => ta.alma(series = source, length = length, offset = almaOffset, sigma = almaSigma) 
        'VWMA' => ta.vwma(source = source, length = length) 
        'VWAP' => ta.vwap(source = source)
        => na 

float c_MA1 = getMAValue(close, i_MA1Len, i_ALMAOffset, i_ALMASigma)
float c_MA2 = getMAValue(close, i_MA2Len, i_ALMAOffset, i_ALMASigma)
float c_MA3 = getMAValue(close, i_MA3Len, i_ALMAOffset, i_ALMASigma)
float c_MA4 = getMAValue(close, i_MA4Len, i_ALMAOffset, i_ALMASigma)

// Logic: 정배열 될 떄 들어가
var ma1Color = color.new(color.red, 0)
plot(series = c_MA1, title = 'SMA 1', color = ma1Color, linewidth = 1, style = plot.style_line)
var ma2Color = color.new(color.orange, 0)
plot(series = c_MA2, title = 'SMA 2', color = ma2Color, linewidth = 1, style = plot.style_line)
var ma3Color = color.new(color.yellow, 0)
plot(series = c_MA3, title = 'SMA 3', color = ma3Color, linewidth = 1, style = plot.style_line)
var ma4Color = color.new(color.green, 0)
plot(series = c_MA4, title = 'SMA 4', color = ma4Color, linewidth = 1, style = plot.style_line)

bool openLongCond = (c_MA1 >= c_MA2 and c_MA2 >= c_MA3 and c_MA3 >= c_MA4) 
bool openShortCond = (c_MA1 <= c_MA2 and c_MA2 <= c_MA3 and c_MA3 <= c_MA4)

bool openLong = i_longEnabled and openLongCond and (not i_ATRFilterOn or i_ATRFilter)
bool openShort = i_shortEnabled and openShortCond and (not i_ATRFilterOn or i_ATRFilter)

openLongCondColor = openLongCond ? color.new(color = color.blue, transp = 80) : na
bgcolor(color = openLongCondColor)
ATRFilterColor = i_ATRFilter ? color.new(color = color.orange, transp = 80) : na 
bgcolor(color = ATRFilterColor)

bool enterLong = openLong and not (strategy.opentrades.size(strategy.opentrades-1) > 0)
bool enterShort = openShort and not (strategy.opentrades.size(strategy.opentrades-1) < 0)

bool closeLong = i_longEnabled and (c_MA1[1] >= c_MA2[1] and c_MA2[1] >= c_MA3[1] and c_MA3[1] >= c_MA4[1]) and not (c_MA1 >= c_MA2 and c_MA2 >= c_MA3 and c_MA3 >= c_MA4) 
bool closeShort = i_shortEnabled and (c_MA1[1] <= c_MA2[1] and c_MA2[1] <= c_MA3[1] and c_MA3[1] <= c_MA4[1]) and not (c_MA1 <= c_MA2 and c_MA2 <= c_MA3 and c_MA3 <= c_MA4)

// # ========================================================================= #
// #                          Position, Status Conrtol
// # ========================================================================= #

// longisActive: New Long || Already Long && not closeLong, short is the same
bool longIsActive = enterLong or strategy.opentrades.size(strategy.opentrades - 1) > 0 and not closeLong
bool shortIsActive = enterShort or strategy.opentrades.size(strategy.opentrades - 1) < 0 and not closeShort

// before longTPExecution: no trailing SL && after longTPExecution: trailing SL starts
// longTPExecution qunatity should be less than 100% 
bool longTPExecuted = false
bool shortTPExecuted = false

// # ========================================================================= #
// #                          Long Stop Loss Logic
// # ========================================================================= #
float openAtr = ta.valuewhen(enterLong or enterShort, ta.atr(i_slATRLen), 0)

f_getLongSL (source) => 
    switch i_slType
        'Percent' => source * (1 - (i_slPercentLong/100))
        'ATR' => source - i_slATRMultLong * openAtr
        => na

var float c_longSLPrice = na
c_longSLPrice := if (longIsActive)
    if (enterLong)
        f_getLongSL(close)
    else
        c_stopPrice = f_getLongSL(i_tslEnabled ? high : strategy.opentrades.entry_price(trade_num = strategy.opentrades - 1))
        math.max(c_stopPrice, nz(c_longSLPrice[1]))
else
    na

// # ========================================================================= #
// #                          Short Stop Loss Logic
// # ========================================================================= #
f_getShortSL (source) => 
    switch i_slType
        'Percent' => source * (1 + (i_slPercentShort)/100)
        'ATR' => source + i_slATRMultShort * openAtr
        => na

var float c_shortSLPrice = na
c_shortSLPrice := if (shortIsActive)
    if (enterShort)
        f_getShortSL (close)
    else
        c_stopPrice = f_getShortSL(i_tslEnabled ? low : strategy.opentrades.entry_price(strategy.opentrades - 1))
        math.min(c_stopPrice, nz(c_shortSLPrice[1], 999999.9))
else
    na

// # ========================================================================= #
// #                          Long Take Profit Logic
// # ========================================================================= #

f_getLongTP () => 
    switch i_tpType
        'Percent' => close * (1 + (i_tpPercentLong/100))
        'ATR' => close + i_tpATRMultLong * openAtr
        'R:R' => close + i_tpRRratioLong * (close - f_getLongSL(close))
        => na

var float c_longTPPrice = na
c_longTPPrice := if (longIsActive and not longTPExecuted)
    if (enterLong)
        f_getLongTP()
    else 
        nz(c_longTPPrice[1], f_getLongTP())
else
    na

longTPExecuted := strategy.opentrades.size(strategy.opentrades - 1) > 0 and (longTPExecuted[1] or strategy.opentrades.size(strategy.opentrades - 1) < strategy.opentrades.size(strategy.opentrades - 1)[1] or strategy.opentrades.size(strategy.opentrades - 1)[1] == 0 and high >= c_longTPPrice)

// # ========================================================================= #
// #                          Short Take Profit Logic
// # ========================================================================= #

f_getShortTP () => 
    switch i_tpType
        'Percent' => close * (1 - (i_tpPercentShort/100))
        'ATR' => close - i_tpATRMultShort * openAtr
        'R:R' => close - i_tpRRratioShort * (close - f_getLongSL(close))
        => na

var float c_shortTPPrice = na
c_shortTPPrice := if (shortIsActive and not shortTPExecuted)
    if (enterShort)
        f_getShortTP()
    else
        nz(c_shortTPPrice[1], f_getShortTP())
else
    na

shortTPExecuted := strategy.opentrades.size(strategy.opentrades - 1) < 0 and (shortTPExecuted[1] or strategy.opentrades.size(strategy.opentrades - 1) > strategy.opentrades.size(strategy.opentrades - 1)[1] or strategy.opentrades.size(strategy.opentrades - 1)[1] == 0 and low <= c_shortTPPrice)

// # ========================================================================= #
// #                          Make Orders
// # ========================================================================= #

if (c_timeCond)
    if (enterLong)
        strategy.entry(id = "Long Entry", direction = strategy.long , comment = 'Long(' + syminfo.ticker + '): Started', alert_message = 'Long(' + syminfo.ticker + '): Started')

    if (enterShort)
        strategy.entry(id = "Short Entry", direction = strategy.short , comment = 'Short(' + syminfo.ticker + '): Started', alert_message = 'Short(' + syminfo.ticker + '): Started')

    if (closeLong)
        strategy.close(id = 'Long Entry', comment = 'Close Long', alert_message = 'Long: Closed at market price')

    if (closeShort)
        strategy.close(id = 'Short Entry', comment = 'Close Short', alert_message = 'Short: Closed at market price')

    if (longIsActive and i_useSLTP)
        strategy.exit(id = 'Long Take Profit / Stop Loss', from_entry = 'Long Entry', qty_percent = i_tpQuantityPerc, limit = c_longTPPrice, stop = c_longSLPrice, alert_message = 'Long(' + syminfo.ticker + '): Take Profit or Stop Loss executed')
        strategy.exit(id = 'Long Stop Loss', from_entry = 'Long Entry', stop = c_longSLPrice, alert_message = 'Long(' + syminfo.ticker + '): Stop Loss executed')
    
    if (shortIsActive and i_useSLTP)
        strategy.exit(id = 'Short Take Profit / Stop Loss', from_entry = 'Short Entry', qty_percent = i_tpQuantityPerc, limit = c_shortTPPrice, stop = c_shortSLPrice, alert_message = 'Short(' + syminfo.ticker + '): Take Profit or Stop Loss executed')
        strategy.exit(id = 'Short Stop Loss', from_entry = 'Short Entry', stop = c_shortSLPrice, alert_message = 'Short(' + syminfo.ticker + '): Stop Loss executed')

// # ========================================================================= #
// #                          Plot
// # ========================================================================= #

var posColor = color.new(color.white, 0)
plot(series = strategy.opentrades.entry_price(strategy.opentrades - 1), title = 'Position', color = posColor, linewidth = 1, style = plot.style_linebr)

var stopLossColor = color.new(color.maroon, 0)
plot(series = c_longSLPrice, title = 'Long Stop Loss', color = stopLossColor, linewidth = 1, style = plot.style_linebr, offset = 1)
plot(series = c_shortSLPrice, title = 'Short Stop Loss', color = stopLossColor, linewidth = 1, style = plot.style_linebr, offset = 1)

longTPExecutedColor = longTPExecuted ? color.new(color = color.green, transp = 80) : na 
//bgcolor(color = longTPExecutedColor) 
shortTPExecutedColor = shortTPExecuted ? color.new(color = color.red, transp = 80) : na 
//bgcolor(color = shortTPExecutedColor) 
// isPositionOpenedColor = strategy.opentrades.size(strategy.opentrades-1) != 0 ? color.new(color = color.yellow, transp = 90) : na 
// bgcolor(color = isPositionOpenedColor) 

var takeProfitColor = color.new(color.teal, 0)
plot(series = c_longTPPrice, title = 'Long Take Profit', color = takeProfitColor, linewidth = 1, style = plot.style_linebr, offset = 1)
plot(series = c_shortTPPrice, title = 'Short Take Profit', color = takeProfitColor, linewidth = 1, style = plot.style_linebr, offset = 1)

Detail

https://www.fmz.com/strategy/439858

Last Modified

2024-01-24 14:24:36