Name
基于SSL的均线趋势跟随策略Trend-Following-Strategy-Based-on-SSL-Baseline
Author
ChaoZhang
Strategy Description
该策略是一个利用SSL通道指标判断市场趋势,并以均线为基准进行趋势跟随的策略。它适用于中长线的4小时线和日线。
-
SSL通道由克尔特均线和真实振幅构成。它可以判断市场趋势方向。当价格突破上轨时为看涨信号,突破下轨时为看跌信号。
-
策略利用EMA等均线指标计算一条基准均线。这条均线可以过滤掉部分假突破。
-
策略会在价格突破SSL上轨线时做多,价格突破SSL下轨线时做空。在上涨趋势中追涨杀跌,在下跌趋势中抄底捡 knife。
-
止损方式有百分比止损、ATR止损和回看最低价/最高价止损。止盈为止损的N倍。具体参数由用户确定。
-
SSL通道判断趋势方向准确,减少假信号。与均线结合作为入市依据,避免追顶杀底。
-
可灵活选择不同类型的均线,能适应更广泛的市场情况。
-
止损方式灵活多样,可控风险。止盈倍数也可灵活设定,满足不同偏好。
-
可同时做多做空,充分挖掘市场双向机会。
-
均线指标都存在滞后,可能出现亏损累积的情况。
-
震荡行情中刚突破上下轨就会有反转,容易被套。
-
ATR和回看止损在异常突破时可能过于宽松,亏损扩大。
风险应对措施:
- 适当调整均线参数,或选择其他类型均线。
- 调大止损幅度,及时止损。
- 在ATR中加入倍数因子,或调整回看周期。
- 测试更多类型的均线指标,找到最佳参数。
- 优化止损的ATR周期参数。
- 测试不同的止损倍数参数。
- 测试不同的止盈风险系数。
该策略综合利用SSL判断趋势和均线指标确认入市,能有效地进行趋势跟随。它提供了灵活的止损和止盈方式,在控制风险的同时获取更高收益。通过不断测试和优化参数,可以获得更好的交易表现。它是一个值得长期跟踪和投入使用的有效策略。
||
This strategy uses the SSL Channel to judge market trends and follows the trend based on moving average baselines. It is suitable for medium and long term timeframes like the 4-hour and daily charts.
-
The SSL Channel consists of Keltner Channels and True Range. It can determine the trend direction. A breakout above the upper band stands for a bullish signal while a breakout below the lower band stands for a bearish signal.
-
The strategy calculates a baseline with EMA and other MA indicators. This baseline filters some false breakouts.
-
The strategy goes long when price breaks above the SSL upper band and goes short when price breaks below the lower band. It follows uptrend by buying dips and downtrend by selling rallies.
-
Stop loss methods include percentage based, ATR based and looking back to highest high/lowest low. Take profit is a multiplier of stop loss. Specific parameters are determined by users.
-
SSL Channel accurately judges trend direction with less false signals. Combining with MA lines as entry trigger avoids buying tops and selling bottoms.
-
Flexible MA types and parameters suit more market situations.
-
Flexible stop loss methods effectively control risks. Take profit multiplier also customizable for different preferences.
-
Ability to go both long and short makes full use of bilateral market opportunities.
-
Lagging of MA indicators may lead to accumulating losses.
-
Swift reversals after breaking SSL bands bring whipsaws in ranging markets.
-
ATR and look back stop loss may be too loose on anomalies, expanding losses.
Risk Management Tactics:
- Adjust MA parameters or use other types of MA.
- Expand stop loss percentage for timely stop loss.
- Add multiplier in ATR. Tune lookback cycle.
- Test more MA types to find optimal parameters.
- Optimize ATR cycle for stop loss.
- Test different stop loss multipliers.
- Test risk reward coefficient for take profit.
This strategy effectively follows trends by combining SSL Channel to determine trends and MA lines to confirm entry triggers. It provides flexible methods to stop losses and take profits, balancing risks and returns. Continuous testing and parameter tuning will lead to better performance. It is an efficacious strategy worthy of long term tracking and usage.
[/trans]
Strategy Arguments
| Argument | Default | Description |
|---|---|---|
| v_input_1 | timestamp(20 Jan 1990 00:00 +0900) | (?Time)Start Date |
| v_input_2 | timestamp(20 Dec 2030 00:00 +0900) | End Date |
| v_input_string_1 | 0 | (?Strategy: Stop Loss Conditions)SL Type : ATR |
| v_input_float_1 | 3 | SL % |
| v_input_int_1 | 14 | SL ATR Length |
| v_input_float_2 | 4 | SL ATR Multiplier |
| v_input_int_2 | 30 | Lowest Price Before Entry |
| v_input_float_3 | 2 | (?Strategy: Risk Management)Risk : Reward Ratio |
| v_input_float_4 | true | Portfolio Risk % |
| v_input_bool_1 | false | (?Strategy: Drawings)Show TP / SL Boxes |
| v_input_bool_2 | false | Show Trade Exit Labels |
| v_input_bool_3 | false | Show Dashboard |
| v_input_bool_4 | false | Color Bars |
| v_input_bool_5 | true | (?1: SSL Hybrid)use true range for Keltner Channel? |
| v_input_string_2 | 0 | Baseline Type: EMA |
| v_input_int_3 | 30 | Baseline Length |
| v_input_float_5 | 0.2 | Base Channel Multiplier |
| v_input_int_4 | true | Kijun MOD Divider |
| v_input_int_5 | 3 | Baseline Type = JMA -> Jurik Phase |
| v_input_int_6 | true | Baseline Type = JMA -> Jurik Power |
| v_input_int_7 | 10 | Baseline Type = VAMA -> Volatility lookback length |
| v_input_float_6 | 0.8 | Baseline Type = MF (Modular Filter, General Filter) ->Beta |
| v_input_bool_6 | false | Baseline Type = MF (Modular Filter) -> Use Feedback? |
| v_input_float_7 | 0.5 | Baseline Type = MF (Modular Filter) -> Feedback Weighting |
| v_input_int_8 | 20 | EDSMA - Super Smoother Filter Length |
| v_input_int_9 | 0 | EDSMA - Super Smoother Filter Poles: 2 |
Source (PineScript)
/*backtest
start: 2023-12-01 00:00:00
end: 2023-12-31 23:59:59
period: 1h
basePeriod: 15m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/
// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// Thanks to @kevinmck100 for opensource strategy template and @Mihkel00 for SSL Hybrid
// @fpemehd
// @version=5
strategy(title = '[fpemehd] SSL Baseline Strategy',
shorttitle = '[f] SSL',
overlay = true)
// # ========================================================================= #
// # Inputs
// # ========================================================================= #
// 1. Time
i_start = input (defval = timestamp("20 Jan 1990 00:00 +0900"), title = "Start Date", tooltip = "Choose Backtest Start Date", inline = "Start Date", group = "Time" )
i_end = input (defval = timestamp("20 Dec 2030 00:00 +0900"), title = "End Date", tooltip = "Choose Backtest End Date", inline = "End Date", group = "Time" )
inDateRange = true
// 2. Inputs for direction: Long? Short? Both?
// i_longEnabled = input.bool(defval = true , title = "Long?", tooltip = "Enable Long Position Trade?", inline = "1", group = "Long / Short" )
// i_shortEnabled = input.bool(defval = true , title = "Short?", tooltip = "Enable Short Position Trade?", inline = "1", group = "Long / Short" )
// 3. Shared inputs for Long and Short
//// 3-1. Inputs for Stop Loss Type: ATR or Percent?
i_slType = input.string (defval = "ATR", title = "SL Type ", group = "Strategy: Stop Loss Conditions", options = ["Percent", "ATR", "Previous LL / HH"], tooltip = "Stop Loss based on %? ATR?", inline = "1")
i_slPercent = input.float (defval = 3, title = "SL % ", group = "Strategy: Stop Loss Conditions", inline = "2")
i_slAtrLength = input.int (14, "SL ATR Length ", group = "Strategy: Stop Loss Conditions", inline = "3", minval = 0, maxval = 10000)
i_slAtrMultiplier = input.float (4, "SL ATR Multiplier", group = "Strategy: Stop Loss Conditions", inline = "3", minval = 0, step = 0.1, tooltip = "Length of ATR used to calculate Stop Loss. \nSize of StopLoss is determined by multiplication of ATR value. Take Profit is derived from this also by multiplying the StopLoss value by the Risk:Reward multiplier.")
i_slLookBack = input.int(30, "Lowest Price Before Entry", group = "Strategy: Stop Loss Conditions", inline = "4", minval = 30, step = 1, tooltip = "Lookback to find the Lowest Price. \nStopLoss is determined by the Lowest price of the look back period. Take Profit is derived from this also by multiplying the StopLoss value by the Risk:Reward multiplier.")
//// 3-2. Inputs for Quantity & Risk Manangement: Take Profit
i_riskReward = input.float(2, "Risk : Reward Ratio ", group = "Strategy: Risk Management", inline = "1", minval = 0, step = 0.1, tooltip = "Previous high or low (long/short dependant) is used to determine TP level. 'Risk : Reward' ratio is then used to calculate SL based of previous high/low level.\n\nIn short, the higher the R:R ratio, the smaller the SL since TP target is fixed by previous high/low price data.")
i_accountRiskPercent = input.float(1, "Portfolio Risk %", group = "Strategy: Risk Management", inline = "1", minval = 0, step = 0.1, tooltip = "Percentage of portfolio you lose if trade hits SL.\n\nYou then stand to gain\n Portfolio Risk % * Risk : Reward\nif trade hits TP.")
// 4. Inputs for Drawings
i_showTpSlBoxes = input.bool(false, "Show TP / SL Boxes", group = "Strategy: Drawings", inline = "1", tooltip = "Show or hide TP and SL position boxes.\n\nNote: TradingView limits the maximum number of boxes that can be displayed to 500 so they may not appear for all price data under test.")
i_showLabels = input.bool(false, "Show Trade Exit Labels", group = "Strategy: Drawings", inline = "1", tooltip = "Useful labels to identify Profit/Loss and cumulative portfolio capital after each trade closes.\n\nAlso note that TradingView limits the max number of 'boxes' that can be displayed on a chart (max 500). This means when you lookback far enough on the chart you will not see the TP/SL boxes. However you can check this option to identify where trades exited.")
i_showDashboard = input.bool(false, "Show Dashboard", group = "Strategy: Drawings", inline = "1", tooltip = "Show Backtest Results")
i_show_color_bar = input.bool(false , "Color Bars", group = "Strategy: Drawings", inline = "1")
// 5. Inputs for Indicators
//// 5-1. Inputs for Indicator - 1: SSL Hybrid
i_useTrueRange = input.bool(defval = true , title = "use true range for Keltner Channel?", tooltip = "", inline = " ", group = "1: SSL Hybrid")
i_maType = input.string(defval='EMA', title='Baseline Type', options=['SMA', 'EMA', 'DEMA', 'TEMA', 'LSMA', 'WMA', 'MF', 'VAMA', 'TMA', 'HMA', 'JMA', 'Kijun v2', 'EDSMA', 'McGinley'],group = "1: SSL Hybrid")
i_len = input.int(defval=30,title='Baseline Length', group = "1: SSL Hybrid")
i_multy = input.float(0.2, step=0.05, title='Base Channel Multiplier', group = "1: SSL Hybrid")
// Input for Baseline
i_kidiv = input.int(defval=1, maxval=4, minval=0, title='Kijun MOD Divider',inline="Kijun v2", group="1: SSL Hybrid")
i_jurik_phase = input.int(defval=3, title='Baseline Type = JMA -> Jurik Phase', inline='JMA',group="1: SSL Hybrid")
i_jurik_power = input.int(defval=1, title='Baseline Type = JMA -> Jurik Power', inline='JMA',group="1: SSL Hybrid")
i_volatility_lookback = input.int(defval=10, title='Baseline Type = VAMA -> Volatility lookback length', inline='VAMA',group="1: SSL Hybrid")
// MF
i_beta = input.float(0.8, minval=0, maxval=1, step=0.1, title='Baseline Type = MF (Modular Filter, General Filter) ->Beta', inline='MF',group="1: SSL Hybrid")
i_feedback = input.bool(defval=false, title='Baseline Type = MF (Modular Filter) -> Use Feedback?', inline='MF',group="1: SSL Hybrid")
i_z = input.float(0.5, title='Baseline Type = MF (Modular Filter) -> Feedback Weighting', step=0.1, minval=0, maxval=1, inline='MF',group="1: SSL Hybrid")
// EDSMA
i_ssfLength = input.int(title='EDSMA - Super Smoother Filter Length', minval=1, defval=20, inline='EDSMA',group="1: SSL Hybrid")
i_ssfPoles = input.int(title='EDSMA - Super Smoother Filter Poles', defval=2, options=[2, 3], inline='EDSMA',group="1: SSL Hybrid")
// # ========================================================================= #
// # Functions for Stop Loss & Take Profit & Plots
// # ========================================================================= #
percentAsPoints(pcnt) =>
math.round(pcnt / 100 * close / syminfo.mintick)
calcStopLossPrice(pointsOffset, isLong) =>
priceOffset = pointsOffset * syminfo.mintick
if isLong
close - priceOffset
else
close + priceOffset
calcProfitTrgtPrice(pointsOffset, isLong) =>
calcStopLossPrice(-pointsOffset, isLong)
printLabel(barIndex, msg) => label.new(barIndex, close, msg)
printTpSlHitBox(left, right, slHit, tpHit, entryPrice, slPrice, tpPrice) =>
if i_showTpSlBoxes
box.new (left = left, top = entryPrice, right = right, bottom = slPrice, bgcolor = slHit ? color.new(color.red, 60) : color.new(color.gray, 90), border_width = 0)
box.new (left = left, top = entryPrice, right = right, bottom = tpPrice, bgcolor = tpHit ? color.new(color.green, 60) : color.new(color.gray, 90), border_width = 0)
line.new(x1 = left, y1 = entryPrice, x2 = right, y2 = entryPrice, color = color.new(color.yellow, 20))
line.new(x1 = left, y1 = slPrice, x2 = right, y2 = slPrice, color = color.new(color.red, 20))
line.new(x1 = left, y1 = tpPrice, x2 = right, y2 = tpPrice, color = color.new(color.green, 20))
printTpSlNotHitBox(left, right, entryPrice, slPrice, tpPrice) =>
if i_showTpSlBoxes
box.new (left = left, top = entryPrice, right = right, bottom = slPrice, bgcolor = color.new(color.gray, 90), border_width = 0)
box.new (left = left, top = entryPrice, right = right, bottom = tpPrice, bgcolor = color.new(color.gray, 90), border_width = 0)
line.new(x1 = left, y1 = entryPrice, x2 = right, y2 = entryPrice, color = color.new(color.yellow, 20))
line.new(x1 = left, y1 = slPrice, x2 = right, y2 = slPrice, color = color.new(color.red, 20))
line.new(x1 = left, y1 = tpPrice, x2 = right, y2 = tpPrice, color = color.new(color.green, 20))
printTradeExitLabel(x, y, posSize, entryPrice, pnl) =>
if i_showLabels
labelStr = "Position Size: " + str.tostring(math.abs(posSize), "#.##") + "\nPNL: " + str.tostring(pnl, "#.##") + "\nCapital: " + str.tostring(strategy.equity, "#.##") + "\nEntry Price: " + str.tostring(entryPrice, "#.##") + "\nExit Price: " + str.tostring(close,"#.##")
label.new(x = x, y = y, text = labelStr, color = pnl > 0 ? color.new(color.green, 60) : color.new(color.red, 60), textcolor = color.white, style = label.style_label_down)
f_fillCell(_table, _column, _row, _title, _value, _bgcolor, _txtcolor) =>
_cellText = _title + " " + _value
table.cell(_table, _column, _row, _cellText, bgcolor=_bgcolor, text_color=_txtcolor, text_size=size.auto)
// # ========================================================================= #
// # Entry, Close Logic
// # ========================================================================= #
// 1. Calculate Indicators
//// 1-1. Calculate Indicators for SSL Hybrid Baseline
////// TEMA
tema(src, len) =>
ema1 = ta.ema(src, len)
ema2 = ta.ema(ema1, len)
ema3 = ta.ema(ema2, len)
3 * ema1 - 3 * ema2 + ema3
////// EDSMA
get2PoleSSF(src, length) =>
PI = 2 * math.asin(1)
arg = math.sqrt(2) * PI / length
a1 = math.exp(-arg)
b1 = 2 * a1 * math.cos(arg)
c2 = b1
c3 = -math.pow(a1, 2)
c1 = 1 - c2 - c3
ssf = 0.0
ssf := c1 * src + c2 * nz(ssf[1]) + c3 * nz(ssf[2])
ssf
get3PoleSSF(src, length) =>
PI = 2 * math.asin(1)
arg = PI / length
a1 = math.exp(-arg)
b1 = 2 * a1 * math.cos(1.738 * arg)
c1 = math.pow(a1, 2)
coef2 = b1 + c1
coef3 = -(c1 + b1 * c1)
coef4 = math.pow(c1, 2)
coef1 = 1 - coef2 - coef3 - coef4
ssf = 0.0
ssf := coef1 * src + coef2 * nz(ssf[1]) + coef3 * nz(ssf[2]) + coef4 * nz(ssf[3])
ssf
ma(type, src, len) =>
float result = 0
if type == 'TMA'
result := ta.sma(ta.sma(src, math.ceil(len / 2)), math.floor(len / 2) + 1)
result
if type == 'MF'
ts = 0.
b = 0.
c = 0.
os = 0.
//----
alpha = 2 / (len + 1)
a = i_feedback ? i_z * src + (1 - i_z) * nz(ts[1], src) : src
//----
b := a > alpha * a + (1 - alpha) * nz(b[1], a) ? a : alpha * a + (1 - alpha) * nz(b[1], a)
c := a < alpha * a + (1 - alpha) * nz(c[1], a) ? a : alpha * a + (1 - alpha) * nz(c[1], a)
os := a == b ? 1 : a == c ? 0 : os[1]
//----
upper = i_beta * b + (1 - i_beta) * c
lower = i_beta * c + (1 - i_beta) * b
ts := os * upper + (1 - os) * lower
result := ts
result
if type == 'LSMA'
result := ta.linreg(src, len, 0)
result
if type == 'SMA' // Simple
result := ta.sma(src, len)
result
if type == 'EMA' // Exponential
result := ta.ema(src, len)
result
if type == 'DEMA' // Double Exponential
e = ta.ema(src, len)
result := 2 * e - ta.ema(e, len)
result
if type == 'TEMA' // Triple Exponential
e = ta.ema(src, len)
result := 3 * (e - ta.ema(e, len)) + ta.ema(ta.ema(e, len), len)
result
if type == 'WMA' // Weighted
result := ta.wma(src, len)
result
if type == 'VAMA' // Volatility Adjusted
/// Copyright © 2019 to present, Joris Duyck (JD)
mid = ta.ema(src, len)
dev = src - mid
vol_up = ta.highest(dev, i_volatility_lookback)
vol_down = ta.lowest(dev, i_volatility_lookback)
result := mid + math.avg(vol_up, vol_down)
result
if type == 'HMA' // Hull
result := ta.wma(2 * ta.wma(src, len / 2) - ta.wma(src, len), math.round(math.sqrt(len)))
result
if type == 'JMA' // Jurik
/// Copyright © 2018 Alex Orekhov (everget)
/// Copyright © 2017 Jurik Research and Consulting.
phaseRatio = i_jurik_phase < -100 ? 0.5 : i_jurik_phase > 100 ? 2.5 : i_jurik_phase / 100 + 1.5
beta = 0.45 * (len - 1) / (0.45 * (len - 1) + 2)
alpha = math.pow(beta, i_jurik_power)
jma = 0.0
e0 = 0.0
e0 := (1 - alpha) * src + alpha * nz(e0[1])
e1 = 0.0
e1 := (src - e0) * (1 - beta) + beta * nz(e1[1])
e2 = 0.0
e2 := (e0 + phaseRatio * e1 - nz(jma[1])) * math.pow(1 - alpha, 2) + math.pow(alpha, 2) * nz(e2[1])
jma := e2 + nz(jma[1])
result := jma
result
if type == 'Kijun v2'
kijun = math.avg(ta.lowest(len), ta.highest(len)) //, (open + close)/2)
conversionLine = math.avg(ta.lowest(len / i_kidiv), ta.highest(len / i_kidiv))
delta = (kijun + conversionLine) / 2
result := delta
result
if type == 'McGinley'
mg = 0.0
mg := na(mg[1]) ? ta.ema(src, len) : mg[1] + (src - mg[1]) / (len * math.pow(src / mg[1], 4))
result := mg
result
if type == 'EDSMA'
zeros = src - nz(src[2])
avgZeros = (zeros + zeros[1]) / 2
// Ehlers Super Smoother Filter
ssf = i_ssfPoles == 2 ? get2PoleSSF(avgZeros, i_ssfLength) : get3PoleSSF(avgZeros, i_ssfLength)
// Rescale filter in terms of Standard Deviations
stdev = ta.stdev(ssf, len)
scaledFilter = stdev != 0 ? ssf / stdev : 0
alpha = 5 * math.abs(scaledFilter) / len
edsma = 0.0
edsma := alpha * src + (1 - alpha) * nz(edsma[1])
result := edsma
result
result
////// Keltner Baseline Channel (Baseline)
BBMC = ma(i_maType, close, i_len)
Keltma = ma(i_maType, close, i_len)
range_1 = i_useTrueRange ? ta.tr : high - low
rangema = ta.ema(range_1, i_len)
upperk = Keltma + rangema * i_multy
lowerk = Keltma - rangema * i_multy
// 2. Entry Condition for Long and Short
// Condition 1
bullSSL = close > upperk
bearSSL = close < lowerk
// Enter Position based on Condition 1
goLong = inDateRange and bullSSL
goShort = inDateRange and bearSSL
// # ========================================================================= #
// # Position Control Logic (Entry & Exit)
// # ========================================================================= #
// 1. Trade entry and exit variables
var tradeEntryBar = bar_index
var profitPoints = 0.
var lossPoints = 0.
var slPrice = 0.
var tpPrice = 0.
var inLong = false
var inShort = false
// 2. Entry decisions
openLong = (goLong and not inLong) // Long entry condition & not in long position
openShort = (goShort and not inShort) // Short entry condition & not in short position
flippingSides = (goLong and inShort) or (goShort and inLong) // (Long entry condition & in short position) and the opposite
enteringTrade = openLong or openShort // Entering Long or Short Condition
inTrade = inLong or inShort
// 3. Stop Loss & Take Profit Percent
lowestLow = ta.lowest(source = low, length = i_slLookBack)
highestHigh = ta.highest(source = high, length = i_slLookBack)
llhhSLPercent = openLong ? math.abs((close - lowestLow) / close) * 100 : openShort ? math.abs((highestHigh - close) / close) * 100 : na
atr = ta.atr(i_slAtrLength)
slAmount = atr * i_slAtrMultiplier
slPercent = i_slType == 'ATR' ? math.abs((1 - (close - slAmount) / close) * 100) : i_slType == 'Percent' ? i_slPercent : llhhSLPercent
tpPercent = slPercent * i_riskReward
// 4. Risk calculations & Quantity Management
riskAmt = strategy.equity * i_accountRiskPercent / 100
entryQty = math.abs(riskAmt / slPercent * 100) / close
// 5. Open Position
if openLong
if strategy.position_size < 0
printTpSlNotHitBox(tradeEntryBar + 1, bar_index + 1, strategy.position_avg_price, slPrice, tpPrice)
printTradeExitLabel(bar_index + 1, math.max(tpPrice, slPrice), strategy.position_size, strategy.position_avg_price, strategy.openprofit)
strategy.entry("Long", strategy.long, qty = entryQty, alert_message = "Long Entry")
enteringTrade := true
inLong := true
inShort := false
if openShort
if strategy.position_size > 0
printTpSlNotHitBox(tradeEntryBar + 1, bar_index + 1, strategy.position_avg_price, slPrice, tpPrice)
printTradeExitLabel(bar_index + 1, math.max(tpPrice, slPrice), strategy.position_size, strategy.position_avg_price, strategy.openprofit)
strategy.entry("Short", strategy.short, qty = entryQty, alert_message = "Short Entry")
enteringTrade := true
inShort := true
inLong := false
if enteringTrade
profitPoints := percentAsPoints(tpPercent)
lossPoints := percentAsPoints(slPercent)
slPrice := calcStopLossPrice(lossPoints, openLong)
tpPrice := calcProfitTrgtPrice(profitPoints, openLong)
tradeEntryBar := bar_index
// Can add more take profit Actions
strategy.exit("TP/SL", profit = profitPoints, loss = lossPoints, comment_profit = "TP Hit", comment_loss = "SL Hit", alert_profit = "TP Hit Alert", alert_loss = "SL Hit Alert")
// # ========================================================================= #
// # Plots (Bar Color, Plot, Label, Boxes)
// # ========================================================================= #
// 1. SSL Hybrid Baseline
longColor = #00c3ff
shortColor = #ff0062
color_bar = close > upperk ? longColor : close < lowerk ? shortColor : color.gray
p1 = plot(BBMC, color=color.new(color=color_bar, transp=0), linewidth=4, title='MA Baseline')
// 2. Bar color Based On SSL Hybrid Baseline
barcolor(i_show_color_bar ? color_bar : na)
up_channel = plot(upperk, color=color_bar, title='Baseline Upper Channel')
low_channel = plot(lowerk, color=color_bar, title='Basiline Lower Channel')
fill(up_channel, low_channel, color.new(color=color_bar, transp=90))
// 3. Stoploss Boxes
slHit = (inShort and high >= slPrice) or (inLong and low <= slPrice)
tpHit = (inLong and high >= tpPrice) or (inShort and low <= tpPrice)
exitTriggered = slHit or tpHit
entryPrice = strategy.closedtrades.entry_price (strategy.closedtrades - 1)
pnl = strategy.closedtrades.profit (strategy.closedtrades - 1)
posSize = strategy.closedtrades.size (strategy.closedtrades - 1)
if (inTrade and exitTriggered)
inShort := false
inLong := false
printTpSlHitBox(tradeEntryBar + 1, bar_index, slHit, tpHit, entryPrice, slPrice, tpPrice)
printTradeExitLabel(bar_index, math.max(tpPrice, slPrice), posSize, entryPrice, pnl)
if barstate.islastconfirmedhistory and strategy.position_size != 0
printTpSlNotHitBox(tradeEntryBar + 1, bar_index + 1, strategy.position_avg_price, slPrice, tpPrice)
// 4. Data Windows
plotchar(slPrice, "Stop Loss Price", "")
plotchar(tpPrice, "Take Profit Price", "")
// 5. Showing Labels
plotDebugLabels = false
if plotDebugLabels
if bar_index == tradeEntryBar
printLabel(bar_index, "Position size: " + str.tostring(entryQty * close, "#.##"))
// 6. Showing Dashboard
if i_showDashboard
var bgcolor = color.new(color.black,0)
// Keep track of Wins/Losses streaks
newWin = (strategy.wintrades > strategy.wintrades[1]) and (strategy.losstrades == strategy.losstrades[1]) and (strategy.eventrades == strategy.eventrades[1])
newLoss = (strategy.wintrades == strategy.wintrades[1]) and (strategy.losstrades > strategy.losstrades[1]) and (strategy.eventrades == strategy.eventrades[1])
varip int winRow = 0
varip int lossRow = 0
varip int maxWinRow = 0
varip int maxLossRow = 0
if newWin
lossRow := 0
winRow := winRow + 1
if winRow > maxWinRow
maxWinRow := winRow
if newLoss
winRow := 0
lossRow := lossRow + 1
if lossRow > maxLossRow
maxLossRow := lossRow
// Prepare stats table
var table dashTable = table.new(position.bottom_right, 1, 15, border_width=1)
if barstate.islastconfirmedhistory
// Update table
dollarReturn = strategy.netprofit
f_fillCell(dashTable, 0, 0, "Start:", str.format("{0,date,long}", strategy.closedtrades.entry_time(0)) , bgcolor, color.white) // + str.format(" {0,time,HH:mm}", strategy.closedtrades.entry_time(0))
f_fillCell(dashTable, 0, 1, "End:", str.format("{0,date,long}", strategy.opentrades.entry_time(0)) , bgcolor, color.white) // + str.format(" {0,time,HH:mm}", strategy.opentrades.entry_time(0))
_profit = (strategy.netprofit / strategy.initial_capital) * 100
f_fillCell(dashTable, 0, 2, "Net Profit:", str.tostring(_profit, '##.##') + "%", _profit > 0 ? color.green : color.red, color.white)
_numOfDaysInStrategy = (strategy.opentrades.entry_time(0) - strategy.closedtrades.entry_time(0)) / (1000 * 3600 * 24)
f_fillCell(dashTable, 0, 3, "Percent Per Day", str.tostring(_profit / _numOfDaysInStrategy, '#########################.#####')+"%", _profit > 0 ? color.green : color.red, color.white)
_winRate = ( strategy.wintrades / strategy.closedtrades ) * 100
f_fillCell(dashTable, 0, 4, "Percent Profitable:", str.tostring(_winRate, '##.##') + "%", _winRate < 50 ? color.red : _winRate < 75 ? #999900 : color.green, color.white)
f_fillCell(dashTable, 0, 5, "Profit Factor:", str.tostring(strategy.grossprofit / strategy.grossloss, '##.###'), strategy.grossprofit > strategy.grossloss ? color.green : color.red, color.white)
f_fillCell(dashTable, 0, 6, "Total Trades:", str.tostring(strategy.closedtrades), bgcolor, color.white)
f_fillCell(dashTable, 0, 8, "Max Wins In A Row:", str.tostring(maxWinRow, '######') , bgcolor, color.white)
f_fillCell(dashTable, 0, 9, "Max Losses In A Row:", str.tostring(maxLossRow, '######') , bgcolor, color.white)
Detail
https://www.fmz.com/strategy/438805
Last Modified
2024-01-15 14:36:39