new to Qlog #866
Replies: 9 comments 3 replies
-
|
Can you explain what do you mean bun our countries not showing. Where are
they not showing?
As for LoTW and eQSL how did you send them with QLog or another
application? If another application they may not have stored it in
standard ADIF format so it don’t make it properly in the import.
…On Fri, Dec 19, 2025 at 10:34 AM ZB3Z-Gibraltar ***@***.***> wrote:
1... Could some one explain to me why in the log book not all of my
countries actually show ?
2... It is not showing my sent QSLs on LOTW or eQSL yet it show my Reiceved
—
Reply to this email directly, view it on GitHub
<#866>, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUEEMXWDU6ET57EJ2P7UZ334CQSKPAVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZZGI3DIOBRGE>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I got my Adif file from jtdx ? which i will be using on linux , so that
means none of my countries will show ?
On Fri, 19 Dec 2025 at 18:43, Michael Morgan ***@***.***>
wrote:
… Can you explain what do you mean bun our countries not showing. Where are
they not showing?
As for LoTW and eQSL how did you send them with QLog or another
application? If another application they may not have stored it in
standard ADIF format so it don’t make it properly in the import.
On Fri, Dec 19, 2025 at 10:34 AM ZB3Z-Gibraltar ***@***.***>
wrote:
> 1... Could some one explain to me why in the log book not all of my
> countries actually show ?
>
> 2... It is not showing my sent QSLs on LOTW or eQSL yet it show my
Reiceved
>
> —
> Reply to this email directly, view it on GitHub
> <#866>, or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AUEEMXWDU6ET57EJ2P7UZ334CQSKPAVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZZGI3DIOBRGE>
> .
> You are receiving this because you are subscribed to this thread.Message
> ID: ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#866 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/B3WPX6G37EXCUDJYFHHURNL4CQ2M3AVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMZQGEYDKNQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
*73's ZB3Z * *Steve*
|
Beta Was this translation helpful? Give feedback.
-
|
Ok I haven't used JTDX in a while but I know WSJT stores very limited info in their ADIF. When you import you may want to choose the option to 'Update DXCC Information' Did you normally just take the ADI and upload to LoTW and eQSL? If so if you know you uploaded all the contacts you can bulk edit those items to a Y in the log list. I can explain that to you if that is the case. Just let me know. |
Beta Was this translation helpful? Give feedback.
-
|
Yes, please do! that was going to be my next question
…On Fri, 19 Dec 2025 at 20:47, Michael Morgan ***@***.***> wrote:
Ok I haven't used JTDX in a while but I know WSJT stores very limited info
in their ADIF. When you import you may want to choose the option to 'Update
DXCC Information'
image.png (view on web)
<https://github.com/user-attachments/assets/32308d4b-90e6-492c-9564-325a64f72527>
Did you normally just take the ADI and upload to LoTW and eQSL? If so if
you know you uploaded all the contacts you can bulk edit those items to a Y
in the log list. I can explain that to you if that is the case. Just let me
know.
—
Reply to this email directly, view it on GitHub
<#866 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/B3WPX6B3T2OUJLNTEOLXL6L4CRI6HAVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMZQGE4DCNI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
*73's ZB3Z * *Steve*
|
Beta Was this translation helpful? Give feedback.
-
|
If you add for instance the LoTWs field to the log view you can select the rows you want to update then right click on one of the LoTWs rows and select 'Edit Value' Then once you select the proper value you can just click off that field and it will update them all. |
Beta Was this translation helpful? Give feedback.
-
|
I can select the countries if i double click then edit & save in Qlog
…On Fri, 19 Dec 2025 at 23:11, Steve ***@***.***> wrote:
Yes, please do! that was going to be my next question
On Fri, 19 Dec 2025 at 20:47, Michael Morgan ***@***.***>
wrote:
> Ok I haven't used JTDX in a while but I know WSJT stores very limited
> info in their ADIF. When you import you may want to choose the option to
> 'Update DXCC Information'
> image.png (view on web)
> <https://github.com/user-attachments/assets/32308d4b-90e6-492c-9564-325a64f72527>
>
> Did you normally just take the ADI and upload to LoTW and eQSL? If so if
> you know you uploaded all the contacts you can bulk edit those items to a Y
> in the log list. I can explain that to you if that is the case. Just let me
> know.
>
> —
> Reply to this email directly, view it on GitHub
> <#866 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/B3WPX6B3T2OUJLNTEOLXL6L4CRI6HAVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMZQGE4DCNI>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
--
*73's ZB3Z * *Steve*
--
*73's ZB3Z * *Steve*
|
Beta Was this translation helpful? Give feedback.
-
|
When you do an edit on the QSO Detail it does a validation and as part of that it will fill in missing DXCC info. If you have a lot of QSOs it may be easiest export your log then delete them and re-import them with the lookup dxcc information like I mentioned above. |
Beta Was this translation helpful? Give feedback.
-
|
ok i have managed to do that but whilst doing it i noticed the qth was
missing on a few and so was there name & gridsquare ? Also michael is
there a way in Q log to select all in the log book
…On Sat, 20 Dec 2025 at 00:37, Michael Morgan ***@***.***> wrote:
When you do an edit on the QSO Detail it does a validation and as part of
that it will fill in missing DXCC info. If you have a lot of QSOs it may be
easiest export your log then delete them and re-import them with the lookup
dxcc information like I mentioned above.
—
Reply to this email directly, view it on GitHub
<#866 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/B3WPX6BLGXXCMH7PGDA5X234CSD5FAVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMZQGI4TKNY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
*73's ZB3Z * *Steve*
|
Beta Was this translation helpful? Give feedback.
-
|
There isn't a way to select all directly. But you can click on the the first record and scroll down while holding shift (on my Mac it's shift) then select the last record you want and it should select them all in-between. To do a bulk callback lookup if you select them all you can right click and choose 'Update from Callbook' |
Beta Was this translation helpful? Give feedback.
-
|
I do have a few to do ! I am not to sure what you mean export the log then
re import them with the relevant info , are you saying if i EXPORT the info
will automatically be inserted in there ? then i just import , also where
does Qlog store its backups ?
…On Sat, 20 Dec 2025 at 19:40, Steve ***@***.***> wrote:
ok i have managed to do that but whilst doing it i noticed the qth was
missing on a few and so was there name & gridsquare ? Also michael is
there a way in Q log to select all in the log book
On Sat, 20 Dec 2025 at 00:37, Michael Morgan ***@***.***>
wrote:
> When you do an edit on the QSO Detail it does a validation and as part of
> that it will fill in missing DXCC info. If you have a lot of QSOs it may be
> easiest export your log then delete them and re-import them with the lookup
> dxcc information like I mentioned above.
>
> —
> Reply to this email directly, view it on GitHub
> <#866 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/B3WPX6BLGXXCMH7PGDA5X234CSD5FAVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMZQGI4TKNY>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
--
*73's ZB3Z * *Steve*
--
*73's ZB3Z * *Steve*
|
Beta Was this translation helpful? Give feedback.
-
|
I am trying to do thenames 1 by 1 but it keeps jumping back to another call
sign in my book & i have to scroll to the next entry i wish to do i will
try and do a video to show you
…On Sat, 20 Dec 2025 at 22:04, Steve ***@***.***> wrote:
I do have a few to do ! I am not to sure what you mean export the log then
re import them with the relevant info , are you saying if i EXPORT the info
will automatically be inserted in there ? then i just import , also where
does Qlog store its backups ?
On Sat, 20 Dec 2025 at 19:40, Steve ***@***.***> wrote:
> ok i have managed to do that but whilst doing it i noticed the qth was
> missing on a few and so was there name & gridsquare ? Also michael is
> there a way in Q log to select all in the log book
>
> On Sat, 20 Dec 2025 at 00:37, Michael Morgan ***@***.***>
> wrote:
>
>> When you do an edit on the QSO Detail it does a validation and as part
>> of that it will fill in missing DXCC info. If you have a lot of QSOs it may
>> be easiest export your log then delete them and re-import them with the
>> lookup dxcc information like I mentioned above.
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <#866 (reply in thread)>,
>> or unsubscribe
>> <https://github.com/notifications/unsubscribe-auth/B3WPX6BLGXXCMH7PGDA5X234CSD5FAVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMZQGI4TKNY>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
>
> --
> *73's ZB3Z * *Steve*
>
--
*73's ZB3Z * *Steve*
--
*73's ZB3Z * *Steve*
|
Beta Was this translation helpful? Give feedback.
-
|
hope you get what ime saying ...... Here is the video
IMG_8177.MOV
<https://drive.google.com/file/d/1gItrjU3FtAEMjx1wZZhw9cPLcSLHMlXJ/view?usp=drive_web>
…On Sat, 20 Dec 2025 at 22:18, Steve ***@***.***> wrote:
I am trying to do thenames 1 by 1 but it keeps jumping back to another
call sign in my book & i have to scroll to the next entry i wish to do i
will try and do a video to show you
On Sat, 20 Dec 2025 at 22:04, Steve ***@***.***> wrote:
> I do have a few to do ! I am not to sure what you mean export the log
> then re import them with the relevant info , are you saying if i EXPORT the
> info will automatically be inserted in there ? then i just import , also
> where does Qlog store its backups ?
>
>
> On Sat, 20 Dec 2025 at 19:40, Steve ***@***.***> wrote:
>
>> ok i have managed to do that but whilst doing it i noticed the qth was
>> missing on a few and so was there name & gridsquare ? Also michael is
>> there a way in Q log to select all in the log book
>>
>> On Sat, 20 Dec 2025 at 00:37, Michael Morgan ***@***.***>
>> wrote:
>>
>>> When you do an edit on the QSO Detail it does a validation and as part
>>> of that it will fill in missing DXCC info. If you have a lot of QSOs it may
>>> be easiest export your log then delete them and re-import them with the
>>> lookup dxcc information like I mentioned above.
>>>
>>> —
>>> Reply to this email directly, view it on GitHub
>>> <#866 (reply in thread)>,
>>> or unsubscribe
>>> <https://github.com/notifications/unsubscribe-auth/B3WPX6BLGXXCMH7PGDA5X234CSD5FAVCNFSM6AAAAACPR3TNSGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMZQGI4TKNY>
>>> .
>>> You are receiving this because you authored the thread.Message ID:
>>> ***@***.***>
>>>
>>
>>
>> --
>> *73's ZB3Z * *Steve*
>>
>
>
> --
> *73's ZB3Z * *Steve*
>
--
*73's ZB3Z * *Steve*
--
*73's ZB3Z * *Steve*
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
1... Could some one explain to me why in the log book not all of my countries actually show ?
2... It is not showing my sent QSLs on LOTW or eQSL yet it show my Reiceved
Beta Was this translation helpful? Give feedback.
All reactions