| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| master_gridWatt | 0 | 12000 | W | 1 | Master Grid Power |
| backupDischargeTime | 0 | 180000 | min | 1 | Backup discharge time |
| bkpEnerg1ChargeTime | 0 | 30000 | min | 1 | Backup Energy#1 charge time |
| bkpEnerg1DischargeTime | 0 | 30000 | min | 1 | Backup Energy#1 discharge time |
| bkpEnerg2ChargeTime | 0 | 30000 | min | 1 | Backup Energy#2 charge time |
| bkpEnerg2DischargeTime | 0 | 30000 | min | 1 | Backup Energy#2 discharge time |
| wattInfoGridWatt | 0 | 24000 | W | 1 | Power info grid |
| wattInfoChWatt | 0 | 12000 | W | 1 | Power info channel sum |
| wattInfoChWatt1 | 0 | 12000 | W | 1 | Power info channel 1 |
| wattInfoChWatt2 | 0 | 12000 | W | 1 | Power info channel 2 |
| wattInfoChWatt3 | 0 | 12000 | W | 1 | Power info channel 3 |
| wattInfoAllHallWatt | 0 | 12000 | W | 1 | Power info all hall |
| State | Name |
|---|---|
| sysTimezone | System Timezone |
| timezoneId | System Timezone Id |
| appMainVer | Master app main version |
| appDbgVer | Master app debug version |
| appTestVer | Master app test version |
| State | Name |
|---|---|
| hall1Watt | Hall1 power |
| hall1Curr | Hall1 current |
| bkpChWatt | Backup charge power |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| gridVol | 0 | 250 | V | 1 | Grid voltage |
| gridFreq | 0 | 61 | Hz | 1 | Grid Frequency |
| foceChargeHight | 60 | 100 | % | 1 | Charge upper threshold percentage |
| chargeWattPower | 0 | 3600 | W | 1 | Charging Power |
| discLower | 0 | 30 | % | 1 | Discharge lower threshold percentage |
| masterCur | 0 | 100 | A | 1 | Master current |
| oilEngineWatt | 0 | 12000 | W | 1 | Oil engine power |
| backupReserveSoc | 0 | 100 | % | 1 | Backup Reserve SOC |
| timeZone | -12 | 12 | 1 | time zone | |
| solarBackupReserveSoc | 0 | 100 | % | 1 | Solar backup reserve SOC |
| oilMaxOutputWatt | 500 | 7200 | W | 1 | Oil max. charging output power? |
| inletBoxCurrent | 0 | 100 | A | 1 | Inlet box current |
| phaseSubValue | 0 | 360 | ° | 1 | phase Sub Value |
| State | Name | values |
|---|---|---|
| productType | Product type | {0:GRID_OFF_LOAD12,1:GRID_CONNECTED_LOAD12,2:GRID_OFF_LOAD36,3:GRID_CONNECTED_LOAD36} |
| powerSta | Power Status | {0:LOAD_CH_EG_POWER,1:LOAD_CH_ES_POWER,2:LOAD_CH_OIL_POWER,3:LOAD_CH_STOP_EM,4:LOAD_CH_OFF_POWER} |
| isSetOilEngine | isSetOilEngine | {0:no generator?,1:generator?} |
| isAreaErr | Area error | {0:OK?,1:Error?} |
| ch1ForceCharge | Ch1 force charging | {0:normal?,1:forced?} |
| ch2ForceCharge | Ch2 force charging | {0:normal?,1:forced?} |
| ch3ForceCharge | Ch3 force charging | {0:normal?,1:forced?} |
| stormIsEnable | Storm is enable | {0:off?,1:on} |
| inStormMode | Storm mode | {0:inactive?,1:active?} |
| ch1EnableSet | Ch1 enabled | {0:off?,1:on?} |
| ch2EnableSet | Ch2 enabled | {0:off?,1:on?} |
| ch3EnableSet | Ch3 enabled | {0:off?,1:on?} |
| oilEngineToBackChargePersent | Oil Engine To Back Charge Present | {0:not present?,1:present?} |
| ntcOverTempErr | NTC over temp error | {0:OK?,1:error?} |
| smartBackupMode | Smart Backup Mode | {0:off?,1:on?} |
| backupReserveEnable | Backup Reserve Enable | {0:off?,1:on?} |
| oilType | Oil engine type | {0:120V single phase?,1:240V split phase?} |
| stormRequestFlag | Storm request flag | {0:off?,1:on?} |
| stormCurTimeStopFlag | stormCurTimeStopFlag | {0:off?,1:on?} |
| sysCurRunningState | sysCurRunningState | {0:off?,1:on?} |
| rly1RealSta | Relay1 Real Status | {0:off?,1:on?} |
| rly2RealSta | Relay2 Real Status | {0:off?,1:on?} |
| rly3RealSta | Relay3 Real Status | {0:off?,1:on?} |
| rly4RealSta | Relay4 Real Status | {0:off?,1:on?} |
| curRunningStrategy | Current running strategy | {0:?} |
| reasonOfStopDischar | Reason of Stop Discharge | {0:?} |
| reasonOsStopCharge | Reason of Stop Charge | {0:?} |
| State | off | on | Name | cmd |
|---|---|---|---|---|
| epsModeInfo | off | on | EPS mode | {from:iOS,operateType:latestQuotas,id:83154039,lang:de-de,params:{},version:1.0} |
| State | Name |
|---|---|
| hasConfigDone | hasConfigDone |
| area | Area Info |
| stormEndTimestamp | Storm End Timestamp |
| localTime | local time |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| backupFullCap | 0 | 92160 | mAh | 1 | Full capacity |
| backupBatPer | 0 | 100 | % | 1 | Battery SOC |
| backupDischargeRmainBatCap | 0 | 20000 | mAh | 1 | Discharge remain. capacity |
| State | Name | values |
|---|---|---|
| backupIsReady | backupIsReady | {0:not ready?,1:ready?} |
| ctrlSta | ctrlSta | {0:OK?} |
| forceChargeSta | forceChargeSta | {0:OK?} |
| wakeUpChargeSta | wakeUpChargeSta | {0:OK?} |
| energy_5p8Type | Charge type | {0:idle?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| backupRly1Cnt | 0 | n/a | 1 | Backup Relay1 Count | |
| backupRly2Cnt | 0 | n/a | 1 | Backup Relay2 Count |
| State | Name | values |
|---|---|---|
| backupIsReady | backupIsReady | {0:not ready?,1:ready?} |
| ctrlSta | ctrlSta | {0:OK?} |
| forceChargeSta | forceChargeSta | {0:OK?} |
| wakeUpChargeSta | wakeUpChargeSta | {0:OK?} |
| energy_5p8Type | Charge type | {0:idle?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| backupRly1Cnt | 0 | n/a | 1 | Backup Relay1 Count | |
| backupRly2Cnt | 0 | n/a | 1 | Backup Relay2 Count |
| State | Name | values |
|---|---|---|
| backupIsReady | backupIsReady | {0:not ready?,1:ready?} |
| ctrlSta | ctrlSta | {0:OK?} |
| forceChargeSta | forceChargeSta | {0:OK?} |
| wakeUpChargeSta | wakeUpChargeSta | {0:OK?} |
| energy_5p8Type | Charge type | {0:idle?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| backupRly1Cnt | 0 | n/a | 1 | Backup Relay1 Count | |
| backupRly2Cnt | 0 | n/a | 1 | Backup Relay2 Count |
| State | Name | values |
|---|---|---|
| isEnable | Device enabled | {0:off?,1:on} |
| isConnect | Device connected | {0:not connected?,1:connected?} |
| isAcOpen | AC switch open | {0:off?,1:on} |
| isPowerOutput | Power output | {0:off?,1:on} |
| isGridCharge | Grid charge | {0:off?,1:on} |
| isMpptCharge | MPPT charge | {0:off?,1:on} |
| emsChgFlag | EMS Charge flag | {0:off?,1:on} |
| hwConnect | HW connected | {0:off?,1:on} |
| errorCodeNum | Error code | {0:OK?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| batteryPercentage | 0 | 100 | % | 1 | Battery SOC |
| outputPower | 0 | 7200 | W | 1 | Output power |
| emsBatTemp | 0 | 80 | °C | 1 | EMS battery temperature |
| lcdInputWatts | 0 | 7200 | W | 1 | Input power (LCD) |
| pvChargeWatts | 0 | 5600 | W | 1 | Charge power |
| pvLowChargeWatts | 0 | 1600 | W | 1 | Low charge power |
| pvHeightChargeWatts | 0 | 4000 | W | 1 | High charge power |
| State | Name |
|---|---|
| oilPackNum | Oil pack# |
| multPackNum | Multo pack# |
| State | Name | values |
|---|---|---|
| isEnable | Device enabled | {0:off?,1:on} |
| isConnect | Device connected | {0:not connected?,1:connected?} |
| isAcOpen | AC switch open | {0:off?,1:on} |
| isPowerOutput | Power output | {0:off?,1:on} |
| isGridCharge | Grid charge | {0:off?,1:on} |
| isMpptCharge | MPPT charge | {0:off?,1:on} |
| emsChgFlag | EMS Charge flag | {0:off?,1:on} |
| hwConnect | HW connected | {0:off?,1:on} |
| errorCodeNum | Error code | {0:OK?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| batteryPercentage | 0 | 100 | % | 1 | Battery SOC |
| outputPower | 0 | 7200 | W | 1 | Output power |
| emsBatTemp | 0 | 80 | °C | 1 | EMS battery temperature |
| lcdInputWatts | 0 | 7200 | W | 1 | Input power (LCD) |
| pvChargeWatts | 0 | 5600 | W | 1 | Charge power |
| pvLowChargeWatts | 0 | 1600 | W | 1 | Low charge power |
| pvHeightChargeWatts | 0 | 4000 | W | 1 | High charge power |
| State | Name |
|---|---|
| oilPackNum | Oil pack# |
| multPackNum | Multo pack# |
| State | Name | values |
|---|---|---|
| isEnable | Device enabled | {0:off?,1:on} |
| isConnect | Device connected | {0:not connected?,1:connected?} |
| isAcOpen | AC switch open | {0:off?,1:on} |
| isPowerOutput | Power output | {0:off?,1:on} |
| isGridCharge | Grid charge | {0:off?,1:on} |
| isMpptCharge | MPPT charge | {0:off?,1:on} |
| emsChgFlag | EMS Charge flag | {0:off?,1:on} |
| hwConnect | HW connected | {0:off?,1:on} |
| errorCodeNum | Error code | {0:OK?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| batteryPercentage | 0 | 100 | % | 1 | Battery SOC |
| outputPower | 0 | 7200 | W | 1 | Output power |
| emsBatTemp | 0 | 80 | °C | 1 | EMS battery temperature |
| lcdInputWatts | 0 | 7200 | W | 1 | Input power (LCD) |
| pvChargeWatts | 0 | 5600 | W | 1 | Charge power |
| pvLowChargeWatts | 0 | 1600 | W | 1 | Low charge power |
| pvHeightChargeWatts | 0 | 4000 | W | 1 | High charge power |
| State | Name |
|---|---|
| oilPackNum | Oil pack# |
| multPackNum | Multo pack# |
| State | Name | values |
|---|---|---|
| isConnect | Device connected | {0:off?,1:on?} |
| isAcOpen | AC switch open | {0:off?,1:on?} |
| pvInsertState | Insert state | {0:off?,1:on?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| batterySoc | 0 | 100 | % | 1 | Battery SOC |
| fullCap | 0 | 80000 | mAh | 1 | Full capacity |
| ratePower | 0 | 7200 | W | 1 | Rated power |
| outputPower | 0 | 7200 | W | 1 | Output power |
| emsBatTemp | 0 | 80 | °C | 1 | EMS battery temperature |
| lcdInputWatts | 0 | 7200 | W | 1 | Input power (LCD) |
| pvLowChargeWatts | 0 | 1600 | W | 1 | Low charge power |
| chargeTime | 0 | 15999 | min | 1 | Charge time |
| dischargeTime | 0 | 15999 | min | 1 | Discharge time |
| State | Name | values |
|---|---|---|
| isConnect | Device connected | {0:off?,1:on?} |
| isAcOpen | AC switch open | {0:off?,1:on?} |
| pvInsertState | Insert state | {0:off?,1:on?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| batterySoc | 0 | 100 | % | 1 | Battery SOC |
| fullCap | 0 | 80000 | mAh | 1 | Full capacity |
| ratePower | 0 | 7200 | W | 1 | Rated power |
| outputPower | 0 | 7200 | W | 1 | Output power |
| emsBatTemp | 0 | 80 | °C | 1 | EMS battery temperature |
| lcdInputWatts | 0 | 7200 | W | 1 | Input power (LCD) |
| pvLowChargeWatts | 0 | 1600 | W | 1 | Low charge power |
| chargeTime | 0 | 15999 | min | 1 | Charge time |
| dischargeTime | 0 | 15999 | min | 1 | Discharge time |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| midPriorityDischargeTime | 0 | 15499 | min | 1 | midPriorityDischargeTime |
| highPriorityDischargeTime | 0 | 15499 | min | 1 | highPriorityDischargeTime: |
| ch1Info_linkCh | 0 | 12 | 1 | Split channel number #1 | |
| ch1Info_setAmp | 0 | 30 | A | 1 | Current setting #1 |
| ch1Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #1 | |
| ch2Info_linkCh | 0 | 12 | 1 | Split channel number #2 | |
| ch2Info_setAmp | 0 | 30 | A | 1 | Current setting #2 |
| ch2Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #2 | |
| ch3Info_linkCh | 0 | 12 | 1 | Split channel number #3 | |
| ch3Info_setAmp | 0 | 30 | A | 1 | Current setting #3 |
| ch3Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #3 | |
| ch4Info_linkCh | 0 | 12 | 1 | Split channel number #4 | |
| ch4Info_setAmp | 0 | 30 | A | 1 | Current setting #4 |
| ch4Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #4 | |
| ch5Info_linkCh | 0 | 12 | 1 | Split channel number #5 | |
| ch5Info_setAmp | 0 | 30 | A | 1 | Current setting #5 |
| ch5Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #5 | |
| ch6Info_linkCh | 0 | 12 | 1 | Split channel number #6 | |
| ch6Info_setAmp | 0 | 30 | A | 1 | Current setting #6 |
| ch6Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #6 | |
| ch7Info_linkCh | 0 | 12 | 1 | Split channel number #7 | |
| ch7Info_setAmp | 0 | 30 | A | 1 | Current setting #7 |
| ch7Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #7 | |
| ch8Info_linkCh | 0 | 12 | 1 | Split channel number #8 | |
| ch8Info_setAmp | 0 | 30 | A | 1 | Current setting #8 |
| ch8Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #8 | |
| ch9Info_linkCh | 0 | 12 | 1 | Split channel number #9 | |
| ch9Info_setAmp | 0 | 30 | A | 1 | Current setting #9 |
| ch9Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #9 | |
| ch10Info_linkCh | 0 | 12 | 1 | Split channel number #10 | |
| ch10Info_setAmp | 0 | 30 | A | 1 | Current setting #10 |
| ch10Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #10 | |
| ch11Info_linkCh | 0 | 12 | 1 | Split channel number #11 | |
| ch11Info_setAmp | 0 | 30 | A | 1 | Current setting #11 |
| ch11Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #11 | |
| ch12Info_linkCh | 0 | 12 | 1 | Split channel number #12 | |
| ch12Info_setAmp | 0 | 30 | A | 1 | Current setting #12 |
| ch12Info_loadRlyCnt | 0 | n/a | 1 | Load relay count #12 |
| State | Name | values |
|---|---|---|
| ch1Info_linkMark | Split status channel #1 | {0:Not be split?,1:Should be split?} |
| ch2Info_linkMark | Split status channel #2 | {0:Not be split?,1:Should be split?} |
| ch3Info_linkMark | Split status channel #3 | {0:Not be split?,1:Should be split?} |
| ch4Info_linkMark | Split status channel #4 | {0:Not be split?,1:Should be split?} |
| ch5Info_linkMark | Split status channel #5 | {0:Not be split?,1:Should be split?} |
| ch6Info_linkMark | Split status channel #6 | {0:Not be split?,1:Should be split?} |
| ch7Info_linkMark | Split status channel #7 | {0:Not be split?,1:Should be split?} |
| ch8Info_linkMark | Split status channel #8 | {0:Not be split?,1:Should be split?} |
| ch9Info_linkMark | Split status channel #9 | {0:Not be split?,1:Should be split?} |
| ch10Info_linkMark | Split status channel #10 | {0:Not be split?,1:Should be split?} |
| ch11Info_linkMark | Split status channel #11 | {0:Not be split?,1:Should be split?} |
| ch12Info_linkMark | Split status channel #12 | {0:Not be split?,1:Should be split?} |
| ch1Sta_loadSta | Channel #1 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch1Sta_ctrlMode | Channel #1 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch1Sta_noticeEnable | Channel #1 Notice enable | {0:off?,1:on?} |
| ch1Sta_noticeAction | Channel #1 Notice action | {0:OK?} |
| ch1Sta_loadChSwitchCause | Channel #1 Load switch cause | {0:OK?} |
| ch2Sta_loadSta | Channel #2 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch2Sta_ctrlMode | Channel #2 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch2Sta_noticeEnable | Channel #2 Notice enable | {0:off?,1:on?} |
| ch2Sta_noticeAction | Channel #2 Notice action | {0:OK?} |
| ch2Sta_loadChSwitchCause | Channel #2 Load switch cause | {0:OK?} |
| ch3Sta_loadSta | Channel #3 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch3Sta_ctrlMode | Channel #3 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch3Sta_noticeEnable | Channel #3 Notice enable | {0:off?,1:on?} |
| ch3Sta_noticeAction | Channel #3 Notice action | {0:OK?} |
| ch3Sta_loadChSwitchCause | Channel #3 Load switch cause | {0:OK?} |
| ch4Sta_loadSta | Channel #4 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch4Sta_ctrlMode | Channel #4 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch4Sta_noticeEnable | Channel #4 Notice enable | {0:off?,1:on?} |
| ch4Sta_noticeAction | Channel #4 Notice action | {0:OK?} |
| ch4Sta_loadChSwitchCause | Channel #4 Load switch cause | {0:OK?} |
| ch5Sta_loadSta | Channel #5 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch5Sta_ctrlMode | Channel #5 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch5Sta_noticeEnable | Channel #5 Notice enable | {0:off?,1:on?} |
| ch5Sta_noticeAction | Channel #5 Notice action | {0:OK?} |
| ch5Sta_loadChSwitchCause | Channel #5 Load switch cause | {0:OK?} |
| ch6Sta_loadSta | Channel #6 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch6Sta_ctrlMode | Channel #6 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch6Sta_noticeEnable | Channel #6 Notice enable | {0:off?,1:on?} |
| ch6Sta_noticeAction | Channel #6 Notice action | {0:OK?} |
| ch6Sta_loadChSwitchCause | Channel #6 Load switch cause | {0:OK?} |
| ch7Sta_loadSta | Channel #7 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch7Sta_ctrlMode | Channel #7 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch7Sta_noticeEnable | Channel #7 Notice enable | {0:off?,1:on?} |
| ch7Sta_noticeAction | Channel #7 Notice action | {0:OK?} |
| ch7Sta_loadChSwitchCause | Channel #7 Load switch cause | {0:OK?} |
| ch8Sta_loadSta | Channel #8 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch8Sta_ctrlMode | Channel #8 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch8Sta_noticeEnable | Channel #8 Notice enable | {0:off?,1:on?} |
| ch8Sta_noticeAction | Channel #8 Notice action | {0:OK?} |
| ch8Sta_loadChSwitchCause | Channel #8 Load switch cause | {0:OK?} |
| ch9Sta_loadSta | Channel #9 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch9Sta_ctrlMode | Channel #9 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch9Sta_noticeEnable | Channel #9 Notice enable | {0:off?,1:on?} |
| ch9Sta_noticeAction | Channel #9 Notice action | {0:OK?} |
| ch9Sta_loadChSwitchCause | Channel #9 Load switch cause | {0:OK?} |
| ch10Sta_loadSta | Channel #10 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch10Sta_ctrlMode | Channel #10 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch10Sta_noticeEnable | Channel #10 Notice enable | {0:off?,1:on?} |
| ch10Sta_noticeAction | Channel #10 Notice action | {0:OK?} |
| ch10Sta_loadChSwitchCause | Channel #10 Load switch cause | {0:OK?} |
| ch11Sta_loadSta | Channel #11 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch11Sta_ctrlMode | Channel #11 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch11Sta_noticeEnable | Channel #11 Notice enable | {0:off?,1:on?} |
| ch11Sta_noticeAction | Channel #11 Notice action | {0:OK?} |
| ch11Sta_loadChSwitchCause | Channel #11 Load switch cause | {0:OK?} |
| ch12Sta_loadSta | Channel #12 power supply type | {0:Grid supply,1:storage power supply,2:close} |
| ch12Sta_ctrlMode | Channel #12 contol mode 0-Auto/1-Manual | {0:Auto,1:Manual,2:failure} |
| ch12Sta_noticeEnable | Channel #12 Notice enable | {0:off?,1:on?} |
| ch12Sta_noticeAction | Channel #12 Notice action | {0:OK?} |
| ch12Sta_loadChSwitchCause | Channel #12 Load switch cause | {0:OK?} |
| State | Name |
|---|---|
| ch1Info_chName | Channel name #1 |
| ch2Info_chName | Channel name #2 |
| ch3Info_chName | Channel name #3 |
| ch4Info_chName | Channel name #4 |
| ch5Info_chName | Channel name #5 |
| ch6Info_chName | Channel name #6 |
| ch7Info_chName | Channel name #7 |
| ch8Info_chName | Channel name #8 |
| ch9Info_chName | Channel name #9 |
| ch10Info_chName | Channel name #10 |
| ch11Info_chName | Channel name #11 |
| ch12Info_chName | Channel name #12 |
| ch1Sta_noticeSetTime | Channel #1 notice set time |
| ch2Sta_noticeSetTime | Channel #2 notice set time |
| ch3Sta_noticeSetTime | Channel #3 notice set time |
| ch4Sta_noticeSetTime | Channel #4 notice set time |
| ch5Sta_noticeSetTime | Channel #5 notice set time |
| ch6Sta_noticeSetTime | Channel #6 notice set time |
| ch7Sta_noticeSetTime | Channel #7 notice set time |
| ch8Sta_noticeSetTime | Channel #8 notice set time |
| ch9Sta_noticeSetTime | Channel #9 notice set time |
| ch10Sta_noticeSetTime | Channel #10 notice set time |
| ch11Sta_noticeSetTime | Channel #11 notice set time |
| ch12Sta_noticeSetTime | Channel #12 notice set time |
| State | Name | values |
|---|---|---|
| gridSta | Grid status | {0:Grid volt. not detected,1:Grid OK,2:Grid overvolt./overfreq} |
| masterRlyErrFlg | Master Relay Error Flag | {0:OK?,1:Error?} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| gridVol | 0 | 250 | V | 1 | Grid volatge |
| masterRly1Cnt | 0 | n/a | 1 | Master Relay1 count | |
| masterRly2Cnt | 0 | n/a | 1 | Master Relay2 count | |
| masterRly3Cnt | 0 | n/a | 1 | Master Relay3 count | |
| masterRly4Cnt | 0 | n/a | 1 | Master Relay4 count | |
| backupVol_L1SafeData | 0 | 250 | V | 1 | backupVol_L1SafeData |
| backupVol_L2SafeData | 0 | 250 | V | 1 | backupVol_L2SafeData |
| backupPhaseDiffSafeData | 0 | 65535 | 1 | backupPhaseDiffSafeData | |
| loadVol_L1SafeData | 0 | 250 | V | 1 | loadVol_L1SafeData |
| loadVol_L2SafeData | 0 | 250 | V | 1 | loadVol_L2SafeData |
| loadPhaseDiffSafeData | 0 | 65535 | 1 | loadPhaseDiffSafeData | |
| masterVol_L1SafeData | 0 | 250 | V | 1 | masterVol_L1SafeData |
| masterVol_L2SafeData | 0 | 250 | V | 1 | masterVol_L2SafeData |
| masterPhaseDiffSafeData | 0 | 65535 | 1 | masterPhaseDiffSafeData |
| State | Name | values |
|---|---|---|
| isCfg | Is config | {0:Config pending?,1:Config done?} |
| loadIsEnable1 | Channel #1 load status | {0:off,1:on} |
| loadIsEnable2 | Channel #2 load status | {0:off,1:on} |
| loadIsEnable3 | Channel #3 load status | {0:off,1:on} |
| loadIsEnable4 | Channel #4 load status | {0:off,1:on} |
| loadIsEnable5 | Channel #5 load status | {0:off,1:on} |
| loadIsEnable6 | Channel #6 load status | {0:off,1:on} |
| loadIsEnable7 | Channel #7 load status | {0:off,1:on} |
| loadIsEnable8 | Channel #8 load status | {0:off,1:on} |
| loadIsEnable9 | Channel #9 load status | {0:off,1:on} |
| loadIsEnable10 | Channel #10 load status | {0:off,1:on} |
| loadIsEnable11 | Channel #11 load status | {0:off,1:on} |
| loadIsEnable12 | Channel #12 load status | {0:off,1:on} |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| midPriorityChDischargeLow | 0 | 30 | % | 1 | midPriorityChDischargeLow |
| loadPriority1 | 0 | n/a | 1 | Channel #1 load priority | |
| loadPriority2 | 0 | n/a | 1 | Channel #2 load priority | |
| loadPriority3 | 0 | n/a | 1 | Channel #3 load priority | |
| loadPriority4 | 0 | n/a | 1 | Channel #4 load priority | |
| loadPriority5 | 0 | n/a | 1 | Channel #5 load priority | |
| loadPriority6 | 0 | n/a | 1 | Channel #6 load priority | |
| loadPriority7 | 0 | n/a | 1 | Channel #7 load priority | |
| loadPriority8 | 0 | n/a | 1 | Channel #8 load priority | |
| loadPriority9 | 0 | n/a | 1 | Channel #9 load priority | |
| loadPriority10 | 0 | n/a | 1 | Channel #10 load priority | |
| loadPriority11 | 0 | n/a | 1 | Channel #11 load priority | |
| loadPriority12 | 0 | n/a | 1 | Channel #12 load priority |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| cur_0 | 0 | 30 | A | 1 | Channel #1 current |
| cur_1 | 0 | 30 | A | 1 | Channel #2 current |
| cur_2 | 0 | 30 | A | 1 | Channel #3 current |
| cur_3 | 0 | 30 | A | 1 | Channel #4 current |
| cur_4 | 0 | 30 | A | 1 | Channel #5 current |
| cur_5 | 0 | 30 | A | 1 | Channel #6 current |
| cur_6 | 0 | 30 | A | 1 | Channel #7 current |
| cur_7 | 0 | 30 | A | 1 | Channel #8 current |
| cur_8 | 0 | 30 | A | 1 | Channel #9 current |
| cur_9 | 0 | 30 | A | 1 | Channel #10 current |
| cur_10 | 0 | 30 | A | 1 | Channel #11 current |
| cur_11 | 0 | 30 | A | 1 | Channel #12 current |
| sumCur | 0 | 30 | A | 1 | Total Load Current |
| State | Min | Max | Unit | Mult | Name |
|---|---|---|---|---|---|
| chWatt_0 | 0 | 3600 | W | 1 | Power channel #1 |
| chWatt_1 | 0 | 3600 | W | 1 | Power channel #2 |
| chWatt_2 | 0 | 3600 | W | 1 | Power channel #3 |
| chWatt_3 | 0 | 3600 | W | 1 | Power channel #4 |
| chWatt_4 | 0 | 3600 | W | 1 | Power channel #5 |
| chWatt_5 | 0 | 3600 | W | 1 | Power channel #6 |
| chWatt_6 | 0 | 3600 | W | 1 | Power channel #7 |
| chWatt_7 | 0 | 3600 | W | 1 | Power channel #8 |
| chWatt_8 | 0 | 3600 | W | 1 | Power channel #9 |
| chWatt_9 | 0 | 3600 | W | 1 | Power channel #10 |
| chWatt_10 | 0 | 3600 | W | 1 | Power channel #11 |
| chWatt_11 | 0 | 3600 | W | 1 | Power channel #12 |
| sumWatt | 0 | 10000 | W | 1 | Total Load Power |