[BUG]: Containers can't be build on M1

[studentofcoding]

Project

Installation process

Lesson Number

Issue/Experience

I think it only supports linux for now?

Code and Screenshots

=> ERROR [13/19] RUN sh -c "$(curl -sSfL https://release.solana.com/stab  2.2s
------                                                                          
 > [13/19] RUN sh -c "$(curl -sSfL https://release.solana.com/stable/install)": 
#0 1.247 downloading stable installer
#0 2.198 curl: (22) The requested URL returned error: 403 
#0 2.205 solana-install-init: command failed: downloader https://release.solana.com/stable/solana-install-init-aarch64-unknown-linux-gnu /tmp/tmp.M3vwjj3cRL/solana-install-init
------
ERROR: failed to solve: executor failed running [/bin/sh -c sh -c "$(curl -sSfL https://release.solana.com/stable/install)"]: exit code: 1

[ShaunSHamilton]

Thank you for taking the time to open this.

This is odd, because the solana cli is being installed on Linux (Ubuntu20.04). This is the whole point of using Docker.

I will investigate this further, but it seems the issue has to do with the curl request being blocked by your workspace. I suggest seeing if you can access the URL in your browser.

I would double-check your DNS settings as well as firewall which could be blocking the request.

[laitsky]

Facing the similar issue as well on M1, looks like this is ARM-specific problem since there's a dude on Discord getting the same trouble.

[ojasuno]

has anyone run into docker issue, when running on the new M1

[ojasuno]

managed to resolve above Docker issue, not getting stuck here, when it is building the Dockerfile

 => ERROR [13/19] RUN sh -c "$(curl -sSfL https://release.solana.com/stab  2.1s
                                                                
[2022-09-23T08:37:26.179Z]                 
                                                                                
------
 > [13/19] RUN sh -c "$(curl -sSfL https://release.solana.com/stable/install)":
#0 1.116 downloading stable installer
#0 2.022 curl: (22) The requested URL returned error: 403 
#0 2.043 solana-install-init: command failed: downloader https://release.solana.com/stable/solana-install-init-aarch64-unknown-linux-gnu /tmp/tmp.TLQ5Qw4STt/solana-install-init
------
[2022-09-23T08:37:26.179Z] ERROR: failed to solve: executor failed running [/bin/sh -c sh -c "$(curl -sSfL https://release.solana.com/stable/install)"]: exit code: 1

[ShaunSHamilton]

While we are still looking for a fix, we suggest running the course in Gitpod:

NOTE: The course tools are complex, and we have not confirmed every project/lesson will work in Gitpod either.

gitpod-web3.mp4

[ojasuno]

a workaround for now, i downloaded the install file and changed the Dockerfile to execute it locally

# Solana
#RUN sh -c "$(curl -sSfL https://release.solana.com/stable/install)"
CMD install

[scissorsneedfoodtoo]

Did some testing on my M1 Air last week and ran into this issue as well.

I believe it's because Solana's install script takes the container's CPU type into account when deciding which version to download and install. And it seems that, unless a platform is specified, Docker will try to pull an Ubuntu image that's closest to the host's CPU type, which for M1 is aarch64 / ARM64.

Then for Solana, it turns out there are no prebuilt aarch64 version for Linux, just x86_64 / amd64. There are other aarch64 builds, but only for Apple machines: https://github.com/solana-labs/solana/releases/tag/v1.14.2

It's possible to force Docker to build a container using x86_64 Ubuntu with FROM --platform=linux/amd64 ubuntu:20.04. This seems to work, and Solana can install properly while building the container and in one of the early lesson steps.

But once you hit the solana-test-validator step, you'd probably get the following error message: Incompatible CPU detected: missing AVX support. Please build from source on the target.

Turns out that M1 / M2 CPUs don't support AVX or AVX2 instructions, which solana-test-validator uses under the hood. It should be possible to compile Solana from source to get around that, but I ran into some issues while doing that inside the x86_64 Ubuntu container.

The easiest thing for people with M1 / M2 machines to do would be to use GitPod or something similar like @ShaunSHamilton mentioned. Then the container should be built on an x86 machine, and shouldn't run into the same issue with solana-test-validator and the lack of AVX2 support.

[guycode]

failing install on new M1 as well with devcontainer.json.

[codingxjourney]

[2022-10-22T18:26:00.652Z] l https:// 0.0s
=> ERROR [dev_container_auto_added_stage_label 13/19] RUN sh -c "$(curl 3.6s

[dev_container_auto_added_stage_label 13/19] RUN sh -c "$(curl -sSfL https://release.solana.com/stable/install)":
#0 1.477 downloading stable installer
#0 3.600 curl: (22) The requested URL returned error: 403
#0 3.609 solana-install-init: command failed: downloader https://release.solana.com/stable/solana-install-init-aarch64-unknown-linux-gnu /tmp/tmp.snPZp3xpUo/solana-install-init

---

[2022-10-22T18:26:00.652Z] ERROR: failed to solve: executor failed running [/bin/sh -c sh -c "$(curl -sSfL https://release.solana.com/stable/install)"]: exit code: 1
[2022-10-22T18:26:00.657Z] Stop (9533 ms): Run: docker buildx build --load --build-arg BUILDKIT_INLINE_CACHE=1 -f /var/folders/xk/7pnplynn383f5ld8wbd2t_8r0000gn/T/devcontainercli/container-features/0.20.0-1666463151087/Dockerfile-with-features -t vsc-solana-curriculum-00a53c8e8217084823e448bec660d7f9 --target dev_containers_target_stage --build-context dev_containers_feature_content_source=/var/folders/xk/7pnplynn383f5ld8wbd2t_8r0000gn/T/devcontainercli/container-features/0.20.0-1666463151087 --build-arg _DEV_CONTAINERS_BASE_IMAGE=dev_container_auto_added_stage_label --build-arg _DEV_CONTAINERS_IMAGE_USER=root --build-arg _DEV_CONTAINERS_FEATURE_CONTENT_SOURCE=dev_container_feature_content_temp /Users/codingxjourney/solana-curriculums/solana-curriculum
[2022-10-22T18:26:00.658Z] Error: Command failed: docker buildx build --load --build-arg BUILDKIT_INLINE_CACHE=1 -f /var/folders/xk/7pnplynn383f5ld8wbd2t_8r0000gn/T/devcontainercli/container-features/0.20.0-1666463151087/Dockerfile-with-features -t vsc-solana-curriculum-00a53c8e8217084823e448bec660d7f9 --target dev_containers_target_stage --build-context dev_containers_feature_content_source=/var/folders/xk/7pnplynn383f5ld8wbd2t_8r0000gn/T/devcontainercli/container-features/0.20.0-1666463151087 --build-arg _DEV_CONTAINERS_BASE_IMAGE=dev_container_auto_added_stage_label --build-arg _DEV_CONTAINERS_IMAGE_USER=root --build-arg _DEV_CONTAINERS_FEATURE_CONTENT_SOURCE=dev_container_feature_content_temp /Users/codingxjourney/solana-curriculums/solana-curriculum
[2022-10-22T18:26:00.658Z] at Vse (/Users/username/.vscode/extensions/ms-vscode-remote.remote-containers-0.255.4/dist/spec-node/devContainersSpecCLI.js:1869:1635)
[2022-10-22T18:26:00.658Z] at process.processTicksAndRejections (node:internal/process/task_queues:96:5)

[duy211099]

a workaround for now, i downloaded the install file and changed the Dockerfile to execute it locally

# Solana
#RUN sh -c "$(curl -sSfL https://release.solana.com/stable/install)"
CMD install

it's worked. Thank you!

[branddesade]

a workaround for now, i downloaded the install file and changed the Dockerfile to execute it locally

# Solana
#RUN sh -c "$(curl -sSfL https://release.solana.com/stable/install)"
CMD install

it's worked. Thank you!

not working for me

[ShaunSHamilton]

@branddesade What errors can you see in the logs?