PineScript v6 In the horizon?

[myn]

Love your extension. Was curious what the roadmap looked like for Pine Script v6?

[hahntech]

Same for me. I am using the current version and it is not picking up some of the new syntax introduced with version 6. I can send you examples if that helps. My current project uses:
chart.point.now()
And immediately after that line of code the syntax highlighting completely stops.
Thanks!

[frizLabz-FFriZz]

Yes I have started updating it for v6 I let some one make changes to the repo but they had a different vision so give me a couple days and I should have the new syntax and v6 working 👍🏻 I have a different job now so it’s hard to find time lmk if there is any other errors you’ve found. Thanks

…

On Mon, Mar 31, 2025 at 9:38 AM Pete Hahn ***@***.***> wrote: Same for me. I am using the current version and it is not picking up some of the new syntax introduced with version 6. I can send you examples if that helps. My current project uses: chart.point.now() And immediately after that line of code the syntax highlighting completely stops. Thanks! — Reply to this email directly, view it on GitHub <#20 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZ4Q4F62VNAR2KXHTLATCMD2XFHNHAVCNFSM6AAAAABZ7V6EAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDONRWGQ2TAMJRGQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.*** com> [image: hahntech]*hahntech* left a comment (frizLabz-FFriZz/PineScript-v6-vscode#20) <#20 (comment)> Same for me. I am using the current version and it is not picking up some of the new syntax introduced with version 6. I can send you examples if that helps. My current project uses: chart.point.now() And immediately after that line of code the syntax highlighting completely stops. Thanks! — Reply to this email directly, view it on GitHub <#20 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZ4Q4F62VNAR2KXHTLATCMD2XFHNHAVCNFSM6AAAAABZ7V6EAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDONRWGQ2TAMJRGQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.*** com>

[NtsakoB]

Hi guys

V6 is giving me issues with the following:

Syntax error at input "end of line without line continuation"

Syntax error at input "end of line without line continuation" The proble is 'and'

Syntax

expr1 and expr2

// === Entry Conditions ===
longCondition = rsi[1] < rsiBuyThresh and
rsi > rsiBuyThresh and
macdLine > signalLine and
macdLine < 0 and

[NtsakoB]

[hahntech]

Hi guys

V6 is giving me issues with the following:

Syntax error at input "end of line without line continuation"

Syntax error at input "end of line without line continuation" The proble is 'and'

Syntax

expr1 and expr2

// === Entry Conditions === longCondition = rsi[1] < rsiBuyThresh and rsi > rsiBuyThresh and macdLine > signalLine and macdLine < 0 and

I have a suggestion based on my own experience. The line continuation is 2 spaces, not a full tab. So when I get this error, I shift all of those continuation lines all the way to the LEFT, then apply two spaces in front of each line. That usually clears up the line continuation error for me. Hope that helps!

[frizLabz-FFriZz]

I looked into this and yeah there is something with "and" and the end of line continuation.. The way this extension works is it basically just mimics the way "Tradingview" communicates with its IDE for Pine Script. as Tradingview doesn't implement a way to tell if it is a free user or an extension. They only implement this kind of thing for tracking paid members which I could mimic as well but then it would require doing some things that would violate their TOS so I have since removed that feature. If you take your issue and put it in the IDE on Tradingview you'll see it throws an error as well. I say that to say this, I have not done anything to detect errors. Every lint (error check) the whole text file is sent to Tradingviews backend and then it is linted and Tradingview sends back an error report. So the only way this error gets fixed is if it's on Tradingview's end or I code an entire linter for the language which I really don't have time to do.. Even if I did take the time to fix it on our end it would be just a qol update as tradingview would still be sending back errors that I would be silencing and you would still get the error when you transferred it to the on site IDE. Send a bug report into Tradingview as their team is A+ with fixing bugs. or you could hop on Pinecoders telegram and say something to one of the mods they are pretty good about communicating bugs to the devs. Hope this helps. I will be updating the extension, hopefully soon im having some issues with the auto suggestions.

…

On Wed, May 14, 2025 at 5:57 PM Pete Hahn ***@***.***> wrote: *hahntech* left a comment (frizLabz-FFriZz/PineScript-v6-vscode#20) <#20 (comment)> Hi guys V6 is giving me issues with the following: Syntax error at input "end of line without line continuation" Syntax error at input "end of line without line continuation" The proble is 'and' Syntax expr1 and expr2 // === Entry Conditions === longCondition = rsi[1] < rsiBuyThresh *and* rsi > rsiBuyThresh and macdLine > signalLine and macdLine < 0 and I have a suggestion based on my own experience. The line continuation is 2 spaces, not a full tab. So when I get this error, I shift all of those continuation lines to the right, then apply two spaces in front of each line. That usually clears up the line continuation error for me. Hope that helps! — Reply to this email directly, view it on GitHub <#20 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZ4Q4F3GMP7OFGVUDD363O326PC7NAVCNFSM6AAAAABZ7V6EAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDQOBRG43TQNJVGQ> . You are receiving this because you commented.Message ID: ***@***.***>

[hahntech]

Please

Hi guys

V6 is giving me issues with the following:

Syntax error at input "end of line without line continuation"

Syntax error at input "end of line without line continuation" The proble is 'and'

Syntax

expr1 and expr2

// === Entry Conditions === longCondition = rsi[1] < rsiBuyThresh and rsi > rsiBuyThresh and macdLine > signalLine and macdLine < 0 and

Please double check that my previous explanation. I do believe I provided the solution but perhaps it was not stated clearly enough.

I will try to make it a bit more clear. It is quite obvious that the user reporting the error message has tried to use a full tab indent for line continuation when the language requires a 2 space indent for line continuation. I can see it plain as day. There is nothing wrong with the extension and there is no bug to report to TradingView. You cannot use a full tab indent for line continuation. I have attached an updated screenshot which shows two examples. One which uses a full tab indent and produces an error, and one which uses a 2 space indent and produces no error. This screenshot is taking directly from within the PineScript editor.

I hope this helps. I really don't think there is anything wrong and the use must simply update the code to confirm with the language specifications.

[frizLabz-FFriZz]

@hahntech

Sorry if my response seemed rude but I think your right and wrong. I understand that you have provided a fix but that isn't convenient to have to move the lines and add the 2 spaces etc.. and btw any amount of spaces that isn't divisible by 4 spaces (a tab) or isn't 0 spaces is considered a line continuation. So @NtsakoB I believe @hahntech is correct I didn't see your picture because I read your comment via email but your issue I believe is the spaces you have on the new line.

[hahntech]

@hahntech

Sorry if my response seemed rude but I think your right and wrong....

I detected no rudeness whatsoever, not the least bit. Your answer made perfect sense and was very well stated.

You know after I submitted that last solution I was wondering if the real problem here, (the part that's broken), is that the IDE is not properly handling obvious instances of a user trying to create a line continuation. And you confirmed that in your last comment.

When we type the enter key to create a line continuation, the IDE fails to apply the proper amount of white space, and requires the user to modify those lines manually. And I've never really thought of that as a glitch or a bug. But it surely is. I've just been accepting it and soldiering on.

"...and btw any amount of spaces that isn't divisible by 4 spaces (a tab) or isn't 0 spaces is considered a line continuation...."

That's very interesting, thanks for sharing that.

[kaigouthro]

Check my pull req.. full v6 now and great errors through errorlens extension integration

[JakeTheSnake3p0]

Apologies if this has been answered elsewhere, but I'm not getting version updates. I see package.json lists this at 0.1.8 currently, but my extension is sitting at 0.1.7. I initially installed this in VS Code, but have since moved over to Windsurf and now I notice that the extension doesn't even show up in the search - only when I filter for @enabled does it show up (i.e., the extension is already installed via the original port from VS Code > Windsurf).

The version history on VS marketplace shows 0.1.7 also...

[janrinus]

Hi @frizLabz-FFriZz

I have been using your Pine V5 extension for a while and i am really satisfied. Nevertheless, I am noticing that the majority of new indicators on TV is nowadays V6. Therefore i want to switch to V6, but no extension is there yet.

You said you were working on a new V6 version, do you know when it is ready?

Many thanks in advance,

[myn]

Just bumping this. Any word on a release of v6?

[janrinus]

There is a new V6 Pinecode extension in VS code from Tradesdontlie.

[Nixxen]

There is a new V6 Pinecode extension in VS code from Tradesdontlie.

That extension has no repo to verify it. It links to https://github.com/yourusername/Pine-Script-v6-VS-Code which I suspect is a direct copy-paste from a LLM output.