SKPico2040DAC usb adapter PCB

[quelo1972]

Hi, I tried do order, with assembly service, the usb adapter from PCBWay at the following link https://www.pcbway.com/project/shareproject/SIDKick_pico_2040DAC_Programming_Adapter_3db447bf.html but they answer:
"Hello.
This is PCBWay. As for this sharing project, since the author did not share the BOM in the community, the project cannot be published. I hope you understand and consider other sharing projects."

How can I provide them the BOM? Can the author add the BOM to PCBWay community for this project?

Thanks in advance.

[frntc]

Hey,

well, there is no BOM for this adapter as there are no IC/components to solder :-) This PCB allows you to (1) connect USB (4 wires: 5V, GND, D+, D-) to the SKpico2020DAC (the row of 4 pins), and (2) closes the "boot-jumper" (the two pins in the other row). It's essentially a template to solder a USB-socket and (pogo-)pins at the right place. Alternatively you can also use a standard USB-cable and break out from there, I think most people chose that option.

I'm not aware that PCBWay would solder the socket (you can find cheap ones at Aliexpress and other portals) and pogopins, at least I've never tried ordering that.