Ruckus wifi kit zonedirector 1200 & R500 AP

[we-sell-bags]

Mib to see if the serial numbers can be extracted.

without it GLPI keeps adding duplicates , even with the sync on mac.

The Ruckus kit is fairly complex..
They have a massive range , but also the firmware has multiple tracks for each device line.

if a controller is in the network, it re-flashes the APs with a specific firmware that comes with the controller.

If not, then the devices have other firmware where an AP can act as a controller ,or mesh setup.

Mibs removed..
.

[g-bougard]

With a quick look at RUCKUS-ZD-SYSTEM-MIB one, I can see a ruckusZDSystemSerialNumber definition. You can try something like the following to check if you get your S/N (and if I correctly read the MIBs):

snmpget -v2c -c <your_community> <device_ip> .1.3.6.1.4.1.25053.1.2.1.1.1.1.15

[we-sell-bags]

Yep the Zone director 1200 returns the serial....

snmpwalk -v 2c -c bob ! -t 15 -Cc -On -Ox 172.18.0.22 .1.3.6.1.4.1.25053.1.2.1.1.1.1.15
.1.3.6.1.4.1.25053.1.2.1.1.1.1.15.0 = Hex-STRING: 31 31 32 30 33 38 30 30 30 34 37 38

But the AP R500
snmpwalk -v 2c -c bob ! -t 15 -Cc -On -Ox 172.18.0.24 .1.3.6.1.4.1.25053.1.2.1.1.1.1.15
.1.3.6.1.4.1.25053.1.2.1.1.1.1.15 = No Such Object available on this agent at this OID