Crashing after a couple of hours

[grigory]

Getting this in the nohup.out file (running with nohup on GCP), will appreciate any suggestions. Is nohup enough to keep it running?

^[[36mib-gateway_1 |^[[0m 2025-01-09 23:40:33:234 IBC: detected frame entitled: Exit Session Setting; event=Opened
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:40:33:247 IBC: detected frame entitled: Exit Session Setting; event=Activated
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:40:33:271 IBC: detected frame entitled: Exit Session Setting; event=Focused
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:00:937 IBC: detected dialog entitled: Shutdown progress; event=Opened
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:00:938 IBC: detected frame entitled: Exit Session Setting; event=Lost focus
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:00:939 IBC: detected frame entitled: Exit Session Setting; event=Deactivated
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:00:939 IBC: detected dialog entitled: Shutdown progress; event=Activated
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:00:940 IBC: detected dialog entitled: Shutdown progress; event=Focused
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:00:941 IBC: detected frame entitled: Exit Session Setting; event=Closed
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:06,033 JTS-IA Stopper-182 ERROR Attempted to append to non-started appender f
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:06,036 JTS-IA Stopper-182 ERROR Attempted to append to non-started appender f
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:06,050 NIA-Input-Queue-2 ERROR Attempted to append to non-started appender f
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:06,051 NIA-Input-Queue-2 ERROR Attempted to append to non-started appender f
^[[36mib-gateway_1 |^[[0m 2025-01-09 23:45:06,960 pool-3-thread-1 ERROR Attempted to append to non-started appender h
^[[36mib-gateway_1 |^[[0m IBC returned exit status 0
^[[36mib-gateway_1 |^[[0m autorestart file not found
^[[36mib-gateway_1 |^[[0m
^[[36mib-gateway_1 |^[[0m Gateway finished
^[[36mib-gateway_1 |^[[0m

[gnzsnz]

not sure why you need nohup.

the output is incomplete, most of the error message is cut. in any case i would recommend you to look at #87 it might be what you need.

[gnzsnz]

this seems to be explaining the output that provided

IbcAlpha/IBC#25

in short, paste the full log