demo-ubuntu-jammy.Dockerfile

# Copyright 2022 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

FROM ubuntu:jammy
ARG NCPU=4

## [BEGIN packaging.md]

# Install the minimal development tools, libcurl, OpenSSL and libc-ares:

# ```bash
ENV DEBIAN_FRONTEND=noninteractive
RUN apt-get update && \
    apt-get --no-install-recommends install -y apt-transport-https apt-utils \
        automake build-essential cmake ca-certificates curl git \
        gcc g++ libc-ares-dev libc-ares2 libcurl4-openssl-dev libre2-dev \
        libssl-dev m4 make pkg-config tar wget zlib1g-dev
# ```

# #### Abseil

# We need a recent version of Abseil. Enabling `ABSL_PROPAGATE_CXX_STD` 
# propagates the version of C++ used to compile Abseil to anything that depends
# on Abseil.

# ```bash
WORKDIR /var/tmp/build/abseil-cpp
RUN curl -fsSL https://github.com/abseil/abseil-cpp/archive/20250127.0.tar.gz | \
    tar -xzf - --strip-components=1 && \
    cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DABSL_BUILD_TESTING=OFF \
      -DABSL_PROPAGATE_CXX_STD=ON \
      -DBUILD_SHARED_LIBS=yes \
      -S . -B cmake-out && \
    cmake --build cmake-out -- -j ${NCPU:-4} && \
    cmake --build cmake-out --target install -- -j ${NCPU:-4} && \
    ldconfig
# ```

# #### Protobuf

# We need to install a version of Protobuf that is recent enough to support the
# Google Cloud Platform proto files:

# ```bash
WORKDIR /var/tmp/build/protobuf
RUN curl -fsSL https://github.com/protocolbuffers/protobuf/archive/v29.3.tar.gz | \
    tar -xzf - --strip-components=1 && \
    cmake \
        -DCMAKE_BUILD_TYPE=Release \
        -DBUILD_SHARED_LIBS=yes \
        -Dprotobuf_BUILD_TESTS=OFF \
        -Dprotobuf_ABSL_PROVIDER=package \
        -S . -B cmake-out && \
    cmake --build cmake-out -- -j ${NCPU:-4} && \
    cmake --build cmake-out --target install -- -j ${NCPU:-4} && \
    ldconfig
# ```

# #### gRPC

# We also need a version of gRPC that is recent enough to support the Google
# Cloud Platform proto files. We install it using:

# ```bash
WORKDIR /var/tmp/build/grpc
RUN curl -fsSL https://github.com/grpc/grpc/archive/v1.71.0.tar.gz | \
    tar -xzf - --strip-components=1 && \
    cmake \
        -DCMAKE_BUILD_TYPE=Release \
        -DBUILD_SHARED_LIBS=yes \
        -DgRPC_INSTALL=ON \
        -DgRPC_BUILD_TESTS=OFF \
        -DgRPC_ABSL_PROVIDER=package \
        -DgRPC_CARES_PROVIDER=package \
        -DgRPC_PROTOBUF_PROVIDER=package \
        -DgRPC_RE2_PROVIDER=package \
        -DgRPC_SSL_PROVIDER=package \
        -DgRPC_ZLIB_PROVIDER=package \
        -S . -B cmake-out && \
    cmake --build cmake-out -- -j ${NCPU:-4} && \
    cmake --build cmake-out --target install -- -j ${NCPU:-4} && \
    ldconfig
# ```

# #### crc32c

# The project depends on the Crc32c library, we need to compile this from
# source:

# ```bash
WORKDIR /var/tmp/build/crc32c
RUN curl -fsSL https://github.com/google/crc32c/archive/1.1.2.tar.gz | \
    tar -xzf - --strip-components=1 && \
    cmake \
        -DCMAKE_BUILD_TYPE=Release \
        -DBUILD_SHARED_LIBS=yes \
        -DCRC32C_BUILD_TESTS=OFF \
        -DCRC32C_BUILD_BENCHMARKS=OFF \
        -DCRC32C_USE_GLOG=OFF \
        -S . -B cmake-out && \
    cmake --build cmake-out -- -j ${NCPU:-4} && \
    cmake --build cmake-out --target install -- -j ${NCPU:-4} && \
    ldconfig
# ```

# #### nlohmann_json library

# The project depends on the nlohmann_json library. We use CMake to
# install it as this installs the necessary CMake configuration files.
# Note that this is a header-only library, and often installed manually.
# This leaves your environment without support for CMake pkg-config.

# ```bash
WORKDIR /var/tmp/build/json
RUN curl -fsSL https://github.com/nlohmann/json/archive/v3.11.3.tar.gz | \
    tar -xzf - --strip-components=1 && \
    cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DBUILD_SHARED_LIBS=yes \
      -DBUILD_TESTING=OFF \
      -DJSON_BuildTests=OFF \
      -S . -B cmake-out && \
    cmake --build cmake-out --target install -- -j ${NCPU:-4} && \
    ldconfig
# ```

# #### opentelemetry-cpp

# The project has an **optional** dependency on the OpenTelemetry library.
# We recommend installing this library because:
# - the dependency will become required in the google-cloud-cpp v3.x series.
# - it is needed to produce distributed traces of the library.

# ```bash
WORKDIR /var/tmp/build/opentelemetry-cpp
RUN curl -fsSL https://github.com/open-telemetry/opentelemetry-cpp/archive/v1.19.0.tar.gz | \
    tar -xzf - --strip-components=1 && \
    cmake \
        -DCMAKE_BUILD_TYPE=Release \
        -DBUILD_SHARED_LIBS=yes \
        -DWITH_EXAMPLES=OFF \
        -DWITH_ABSEIL=ON \
        -DBUILD_TESTING=OFF \
        -DOPENTELEMETRY_INSTALL=ON \
        -DOPENTELEMETRY_ABI_VERSION_NO=2 \
        -S . -B cmake-out && \
    cmake --build cmake-out --target install -- -j ${NCPU:-4} && \
    ldconfig
# ```

## [DONE packaging.md]

WORKDIR /var/tmp/sccache
RUN curl -fsSL https://github.com/mozilla/sccache/releases/download/v0.10.0/sccache-v0.10.0-x86_64-unknown-linux-musl.tar.gz | \
    tar -zxf - --strip-components=1 && \
    mkdir -p /usr/local/bin && \
    mv sccache /usr/local/bin/sccache && \
    chmod +x /usr/local/bin/sccache

# Update the ld.conf cache in case any libraries were installed in /usr/local/lib*
RUN ldconfig /usr/local/lib*