models.json

{
  "11959369588327473690": {
    "id": 11959369588327473690,
    "name": "Gridfinity iFixit Mako + ES121 Screwdriver Holders",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20iFixit%20Mako%20%2B%20ES121%20Screwdriver%20Holders-60744",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/d4a7e279-f641-4c01-809f-586ef9966f61/iFixit_Driver_Gen_2_and_ES121_Holder.png",
    "description": "Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- ES121 Holder: https://a360.co/3KLQziI\n- Gen 1 Holder: https://a360.co/3rj30Li\n- Gen 2 Holder: https://a360.co/3jxCNVb\n\nThese holders store the popular, high-quality iFixit Mako screwdriver kit, the old-skool iFixit screwdriver set, and the ES121 open-hardware electric screwdriver. Open-source screwdriver, what a time to be alive.\n\nPrint the ones that work with your stuff!\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "tool holders",
    "grid_x": 2,
    "grid_y": 4
  },
  "13063800094719073018": {
    "id": 13063800094719073018,
    "name": "Gridfinity Drawers",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20Drawers-188528",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/35b236e9-3cb2-4950-9e08-f0bbaa42f37f/Gridfinity_Drawers_Body.png",
    "description": "2x3x7.4mm Gridfinity Drawers.\n\nTested in PLA, printed with body cavity facing upwards and with only tiny supports between the gridfinity rows on a Elegoo Neptune 2 model.\n\nSuggest minimal cubic infill (5-10%) with 3-4 outer walls.\n\n * Added drawer model with thicker walls.\n* Refined drawer model for a better fit into the slots horizontally.\n* Added two-compartment drawer model.\n* Added drawer with a tighter horizontal fit.\n* Added double-height drawer model.\n* Added Minifinity drawer model.\n\n* Organize your Gridfinity Drawers with Minifinity!\nhttps://social.thangs.com/m/195636\n\nGridfinity concept by Zack Freedman",
    "category": "small storage",
    "grid_x": 2,
    "grid_y": 2
  },
  "13124435895481119691": {
    "id": 13124435895481119691,
    "name": "Gridfinity Mintion Beagle Cam Mount",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Mintion%20Beagle%20Cam%20Mount-174265",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/0f068199-de7a-4b0b-af8e-7f7ce58b0dd3/Beagle_Cam_Holder_Base.png",
    "description": "Add the easiest way to make 3D printing time lapses to the bestest storage system. Works great with [printer mount baseplates!](https://social.thangs.com/m/60929?utm_source=youtube\u0026utm_medium=video\u0026utm_campaign=zack_f)\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at  \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source file: \nhttps://a360.co/3I8joWp\n\nFor stability during time lapses, I HIGHLY recommend using magnets or screws to attach this to the baseplate.\nMagnets: https://amzn.to/3nzQUv7\n\nPrint one base and two pegs. Glue the pegs into the base holes, taking care to align the notched end with the groove on the underside!\n\n**Gridfinity Tips!**\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "printing accessories",
    "grid_x": 3,
    "grid_y": 2
  },
  "13401556728641201534": {
    "id": 13401556728641201534,
    "name": "Gridfinity | Swinging Drawer",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Swinging%20Drawer-201480",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/b909991f-4267-4a6e-bf88-160e8e8d3136/e3fb00701e2970cc2cd5957334de508e0e681086e73ceee3751d07cfc1365cd5/Gridfinity_SiwingDrawer_Drawer.png",
    "description": "A 3x3x1u Gridfinity Swing-Out Drawer.\n\nSuggest printing with the drawer with body cavity facing upwards, and no supports.  Suggest printing body vertically, with the angled bridge pieces near the bottom, and no supports.\n\nGridfinity concept by Zack Freedman.",
    "category": "small storage",
    "grid_x": 3,
    "grid_y": 3
  },
  "1401637683713221574": {
    "id": 1401637683713221574,
    "name": "Gridfinity | Door'd Container",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Door%27d%20Container-200852",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/5718009f-4d34-467c-8bdb-b77d5f1632de/Gridfinity_DoorBox_Body.png",
    "description": "A 2x2x5.36cm Gridfinity container with a door that swings downward.\n\nSuggest printing with standard profile, body piece with body cavity facing upward, and the door vertically with the fat, pegged part on the bottom, using generated supports, touching buildplate only at 1% support density.",
    "category": "small storage",
    "grid_x": 2,
    "grid_y": 2
  },
  "14094091609750051423": {
    "id": 14094091609750051423,
    "name": "Gridfinity Pick + Tweezer Racks",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Pick%20%2B%20Tweezer%20Racks-60742",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/e6d0505c-0ddd-4715-82ee-a9eebca0e085/Chonk_Rack_Lower.png",
    "description": "Pointy boi storage for the Gridfinity modular workshop storage system - saves space and delicate fingies!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- Pick Rack: https://a360.co/3JCOrIS\n- Chonk Rack: https://a360.co/3xgYhO9\n- Tweezer Rack: https://a360.co/3uxC0dd\n\nThese racks store long, pointy objects at an angle... but angle the business ends away from pokey fingers.\n\nThese are all two-part models. Print an Upper and a Lower and glue 'em together.\n\n- The Pick Rack is perfect for slender tools like picks and files.\n- The Chonk Rack is for thiccer tools (hey-o) like scrapers, forceps, and spring tweezers.\n-  The Twizzles Rack holds tweezers. I call them twizzles because I think it's funny.\n\nThe Twizzles Rack Upper is the only piece that needs support.\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "tool holders",
    "grid_x": 2,
    "grid_y": 2
  },
  "16788891872429463455": {
    "id": 16788891872429463455,
    "name": "Gridfinity Ratchet + Socket Holders",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Ratchet%20%2B%20Socket%20Holders-60906",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/78aa9cf5-1f57-4965-b2e5-f6ee1e6f088a/Ratchet_Holder%2C_Mulwark%2C_Stackable.png",
    "description": "Socket organizers and ratchet holders for the Gridfinity modular workshop storage system!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- 1/4 Imperial holder: https://a360.co/37cdZPW\n- 1/4 Metric holder: https://a360.co/3vgUAFq\n- Mulwark ratchet holder: https://a360.co/3OiHhNJ\n\nThese holders store your socket sets and ratchet drivers. They orient the tools to make them easier to find and grab the bit you need!\n\n**1/4 Imperial and Metric Holders**: Designed for Harbor Freight 10-piece 1/4-socket kits, but should fit many others.\n\n**1/4 Universal Holder**: Has ten 20mm-diameter slots. Note that this is five slots wide, while the Imperial and Metric versions are four slots wide.\n\n**Mulwark Holder**: Fits the [Mulwark-brand low-profile ratchet driver](https://amzn.to/3v6BPEw), the 20pc bit kit, and has slots for 13 more hex bits. I strongly recommend buying the bit kit - a low-profile ratchet needs low-profile bits!\n\nPrint the ones that work with your stuff!\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners!",
    "category": "tool holders",
    "grid_x": 1,
    "grid_y": 4
  },
  "17746260286543247149": {
    "id": 17746260286543247149,
    "name": "Gridfinity 3D Printing Bundle for Nerds",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%203D%20Printing%20Bundle%20for%20Nerds-60741",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/4e7c4888-d003-4a00-b8f8-d05d9d0dea2c/Triple_Volcano_Holder.png",
    "description": "3D printing accessories for the Gridfinity modular workshop system - store tools, nozzles, and more!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- Caddy: https://a360.co/3KzVx2a\n- Bottle Holder: https://a360.co/3LVjAsC\n- Magigoo Holder: https://a360.co/3KzVEe6\n- Nozzle Holder: https://a360.co/3KxGS7y\n- Volcano Nozzle Holder: https://a360.co/3JLhKJz\n- Revo Nozzlebreak Holder: https://a360.co/3xmVPpk\n- Glue Sticc Holder: https://a360.co/3vapCiq\n\nThis assortment of 3D printer organizers is perfect for printing what you love to print - accessories for your printer!\n\n**3D Printer Caddy**: Puts emergency supplies within reach! Holds scraper, nippers, tweezers, acupuncture needles, brass brush, adjustable wrench, and nozzle wrench\n\n**Bottle Holder**: Designed to hold Nano Polymer high-temperature bed treatment, but also fits many small spray bottles. Bottles should not shake loose.\n\n**Dual Bulk Nozzle Holder**: Holds eight copies of two different nozzle sizes. Can stack when loaded with E3D or Creality-style nozzles.\n\n**Quad Revo Holder**: Holds four E3D RapidChange Revo nozzle-heatbreak nozzlebreaks. Can stack.\n\n**Triple Volcano Holder**: Holds three extended E3D-style holders, like those included with the Anycubic Vyper and Kobra. Can stack.\n\n**Glue Stick Holder**: Holds multiple sizes of icky sticky horsey bois, particularly Elmer's small and regular, and Kores.\n\n**Magigoo Holder**: Holds four-piece Magigoo bed treatment assortment pack, and should not allow them to jiggle loose.\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "printing accessories",
    "grid_x": 1,
    "grid_y": 3
  },
  "18352972214225901335": {
    "id": 18352972214225901335,
    "name": "Gridfinity Adjustable Jumper Wire Comb",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Adjustable%20Jumper%20Wire%20Comb-174402",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/789c5ba2-63be-4899-9c10-eb1df51a8115/Adjustable_Jumper_Rack_Base.png",
    "description": "Got a random ball 'o jumpers? Join the club. This can hold all of them. ALL OF THEM.\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nPrint a pair of bases and at least two combs, shove the combs in the slots, stretch the jumpers, and you're gucci. You can put multiple combs on the same base to hold multiple sizes! Wowzers!\n\nThese DEFINITELY need screws or magnets, like these: https://amzn.to/3ArhyOn\n\nYou'll probably need some jumper wires, too: https://amzn.to/3QZy4Lk\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners!",
    "category": "electronics",
    "grid_x": 1,
    "grid_y": 1
  },
  "1869004727623944938": {
    "id": 1869004727623944938,
    "name": "Gridfinity | Tiered Bins",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Tiered%20Bins-206465",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/75894cea-5623-497c-9107-e0dd7cd0cb75/tiered_short_sm.png",
    "description": "A 1x1 set of Gridfinity bins, sized so that they line up to form tiered rows when arrange by height.\n\nSuggest standard printing profiles.\n\nGridfinity by Zack Freedman.",
    "category": "small storage",
    "grid_x": 1,
    "grid_y": 1
  },
  "1975133419418082752": {
    "id": 1975133419418082752,
    "name": "Gridfinity Collet Holder Collet-ction",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Collet%20Holder%20Collet-ction-60743",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/0a59ea0a-bd86-4505-85b0-226121d510c9/Collet_Holder%2C_ER11%2C_Non-Stupid.png",
    "description": "CNC collet storage blocks for the Gridfinity modular workshop storage system - they're both ER11 for now.\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- Stupid Version: https://a360.co/3JznS7x\n- Non-Stupid Version: https://a360.co/3M0PDar\n\nThese bad boys hold CNC collets - I only have an ER11 Snapmaker, so that's what ya get.\n\n**The stupid version** holds collets in their little yellow boxes.\n\n**The non-stupid version** holds the collets without the boxes.\n\nThere's no reason to use the stupid version. Just remember to keep the collets nice and oiled to prevent rust.\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "tool holders",
    "grid_x": 1,
    "grid_y": 3
  },
  "2105299413204494715": {
    "id": 2105299413204494715,
    "name": "Gridfinity | Paper Towel Roll",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Paper%20Towel%20Roll-201112",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/7925821b-61e9-4c45-a874-919ca0987602/Gridfinity_PaperTowel.png",
    "description": "A 3x3x32cm Paper Towel Roll holder for your  Gridfinity arrangement.\n\nSuggest standard profiles with 25%-50% infill. There is a thicc area at the bottom of the dowel for increased strength.\n\nGridfinity concept by Zack Freedman",
    "category": "tool holders",
    "grid_x": 3,
    "grid_y": 3
  },
  "2325264059254841419": {
    "id": 2325264059254841419,
    "name": "Gridfinity Pinecil + TS100 Tips and Tool Holder",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Pinecil%20+%20TS100%20Tips%20and%20Tool%20Holder-201815",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/48026222-232d-4804-acda-26e5bdc29b1e/Pinecil_Extra_Tips_w_Magnet.png",
    "description": "Store your spare soldering tips, screwdriver, and screws!\n\nThis **DOES NOT** hold the handle! Print one of these models too!\n- Pinecil: https://social.thangs.com/m/73357\n- TS100: https://social.thangs.com/m/62805\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at  \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source file: \nhttps://a360.co/3PkMsNb\n\nI have no self-control, so when I bought my Pinecil, I also bought both sets of tips. The existing holders only handle four, so I whipped this up. Both versions hold a screwdriver or hex bit to deal with the tip retaining screw. \n\n**Tips w Magnet:** Has a dished recess that fits the same 6x2mm magnets as the Gridfinity sockets. Perfect for securing the grounding or retaining screws between jobs.\n\n**Tips w Magnet:** Replaces the magnet with storage for a fifth tip.\n\nThis block has a high center of gravity, so I strongly recommend mounting it to [a weighted baseplate](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925?manualModelView=true) using magnets or screws!\n\n**Gridfinity Tips!**\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners. ",
    "category": "",
    "grid_x": 1,
    "grid_y": 1
  },
  "2614035181589644546": {
    "id": 2614035181589644546,
    "name": "Gridfinity | Can Holder",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Can%20Holder-203582",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/a4a47142-91fd-4ba8-a7e5-bed6be59045f/Gridfinity_Cupholder_Tall.png",
    "description": "A 2x2x1u Can holder for your Gridfinity setup.  Short and Tall versions available.\n\nSuggest printing using standard profiles using no supports.\n\nGridfinity by Zack Freedman",
    "category": "",
    "grid_x": 2,
    "grid_y": 2
  },
  "2905189360953175320": {
    "id": 2905189360953175320,
    "name": "Gridfinity Caliper Holder",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Caliper%20Holder-62216",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/4fb6d5ff-0eee-4c77-ad73-2ed9ba5ca995/Caliper_Holder%2C_Mitutoyo_Series_500.png",
    "description": "Stash your measuring bois on your Gridfinity modular workshop storage system, Excalibur style.\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at  \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source file: \nhttps://a360.co/3KZAXs6\n\nThis holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6, 12, and all sizes.\n\nThis block has a high center of gravity, so I strongly recommend mounting it to [a weighted baseplate](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925?manualModelView=true) using magnets or screws!\n\n**Gridfinity Tips!**\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "tool holders",
    "grid_x": 1,
    "grid_y": 2
  },
  "292010053461513617": {
    "id": 292010053461513617,
    "name": "Minifinity  |  Gridfinity Drawers Baseplate",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Minifinity%20%20%7C%20%20Gridfinity%20Drawers%20Baseplate-195636",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/5dc32011-6a81-42f4-8fdb-982f6598a71c/555a978b365aaa20a8588b6607abf142b37b000eecb0712952fdef6891e4dba5/Minifinity_Baseplate_4x6.png",
    "description": "Introducing the most useless Gridfinity accessory-for-an-accessory yet: Minifinity.\n\nAre you finding your Gridfinity Drawers to be untidy?  Organize them with Minifinity!\n\n**Simply print this baseplate (I suggest MSLA machines), and then print your favorite Gridfinity modules at 42% for a perfect fit into Minifinity.**\n\n* Download and print Gridfinity Drawers here!\nhttps://social.thangs.com/m/188528",
    "category": "minifinity"
  },
  "3123251795451777236": {
    "id": 3123251795451777236,
    "name": "Gridfinity Window Divider Bin",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Window%20Divider%20Bin-60754",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/8fecb0bb-c708-418a-8e9f-fd4736ef2bcc/Window_Box_2x1x6_3-Compartment.png",
    "description": "Glass-front open-top storage blocks for the Gridfinity modular workshop storage system - yes, real glass!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at  \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source file: \nhttps://a360.co/3v8mtzG\n\nThese modified divider bins have one wall replaced with a glass microscope slide! Glass is more scratch-resistant than acrylic, and microscope slides come pre-cut to size. \n\nEach bin is made of two parts, the Compartment and the Faceplate. You'll also need:\n- 1x3 Microscope slides: https://amzn.to/3O6qjBO\n- 2mm Repair Tape: https://amzn.to/3M1D9zF\n\nHow to assemble:\n1. Apply two strips of tape to the microscope slides, touching the short edges.\n2. Stick that slide to the faceplate.\n3. Apply two strips of tape down the short sides of the faceplate, over the glass.\n4. Apply a third strip along the bottom. It will curl a little around the bottom.\n5. Slap that crap onto the divider bins. Press hard.\n\nThese are perfect for storing small parts, especially if you plan to stack 'em up. The big window makes it easy to check what's inside and monitor your supply levels.\n\nThe inner surface has a generous scoop to make retrieving parts easy, and the tab fits 12mm label-maker tape.\n\nI've provided a selection of different divider counts, to give you OPTIONS! Because microscope slides are only available in one size, only 2-unit-wide bins are possible.\n\nBrims and support are not required, and these can be printed in any filament with an 0.6mm or smaller nozzle. \n\n**Gridfinity Tips!**\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "small storage",
    "grid_x": 1,
    "grid_y": 2
  },
  "5250960032587307637": {
    "id": 5250960032587307637,
    "name": "Gridfinity | Phone Stand",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Phone%20Stand-202765",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/fccf6a2a-56e6-42ec-b209-b219dc994ee3/Gridfinity_PhoneStand.png",
    "description": "A 2x2x1.5u Gridfinity module with a stylish phone stand.  Looks great in wood-fill PLA. \n\nSuggest printing with standard printing profiles with auto-generated supports at 0%-1% dentsity.",
    "category": "",
    "grid_x": 2,
    "grid_y": 2
  },
  "591169165783421964": {
    "id": 591169165783421964,
    "name": "Gridfinity Printer-Mounted Baseplates",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Printer-Mounted%20Baseplates-60929",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/ab7a66dd-445f-45e7-96af-60ef11e9bdb4/Anycubic_Baseplate%2C_Sidecar.png",
    "description": "Mount storage right to your printer with the Gridfinity modular workshop storage system - whatever machine you use!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- Anycubic Sidecar: https://a360.co/3xonYw4\n- Anycubic Top: https://a360.co/3jy22GN\n- Lulzbot: https://a360.co/3xobNzx\n- Prusa: https://a360.co/3Jzfp47\n- Snapmaker: https://a360.co/37Om65m\n- E3D Toolchanger: https://a360.co/3rlmn6K\n\nThese brackets mount to your 3D printer and allow you to put Gridfinity storage blocks right where you need them! These work especially well for the [Gridfinity 3D-printer accessory kit](https://bit.ly/3jtTfWu).\n\nIf you need more adjacent slots, just print multiple baseplates and butt them up against each other. *I STRONGLY recommend magnets or screws so you don't knock stuff into your printer!*\n\n**Anycubic Vyper/Kobra**: Also fits any printer made of extrusion with 6mm slots. Mount to your printer's frame with [M5 hammer nuts for 6mm slots](https://amzn.to/3jzbOZb) and [M5x12mm countersunk screws](https://amzn.to/3xoGLHV). Remember to measure countersunk screws from the TOP OF THE HEAD!\n\nThe **sidecar** baseplate mounts to the base frame, parallel with the floor, a lot like the included filament holder. The **top-mount** baseplate mounts on the Z axis crossbeam or base frame. *Make sure the gantry, extruder, and plate don't collide with your Gridfinity!*\n\n**Lulzbot**: Fits the upward-facing edges of the top crossbars. This one is a real pain in the butt to install.\n\n**Prusa**: Slides on over the steel frame, no fasteners required. *THE BASEPLATE AND EXTRUDER MUST BE ON OPPOSITE SIDES OF THE FRAME!*\n\n**Snapmaker**: Mount to the optional enclosure with [M5 hammer nuts for 6mm slots](https://amzn.to/3jzbOZb) and [M5x12mm countersunk screws](https://amzn.to/3xoGLHV). Remember to measure countersunk screws from the TOP OF THE HEAD! I didn't make one for the printer itself, sorry!\n\n**Toolchanger**: Mount to the top of the printer with three button head M3x5 screws. *Don't use longer screws! They won't fit!*\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "baseplates",
    "grid_x": 1,
    "grid_y": 1
  },
  "6855048082841050": {
    "id": 6855048082841050,
    "name": "Gridfinity Ring \u0026 Washer Collectors",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20Ring%20\u0026%20Washer%20Collectors-197424",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/362c4646-c99a-4c18-aad4-95e8317f14fb/1x1x3_Ring_Peg.png",
    "description": "A set of 1x1x3 \u0026 1x1x6 modules with a slightly sloped cylinder extruding from the center.  Perfect for organizing keyrings at a jewelry workstation.\n",
    "category": "small storage",
    "grid_x": 1,
    "grid_y": 1
  },
  "7069072784592291008": {
    "id": 7069072784592291008,
    "name": "Gridfinity Pen, Pencil, and Marker Holders",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Pen%2C%20Pencil%2C%20and%20Marker%20Holders-60745",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/77ea1662-b91c-4def-81f2-a4091f62b41c/Sharpie_Holder%2C_Chisel.png",
    "description": "Pen, pencil, and marker storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- Regular Version: https://a360.co/37EP2we\n- Chisel Version: https://a360.co/3E49liU\n- EXTRA THICCCCCC: https://a360.co/3jqmzx4\n\nThese holders were designed to securely store Sharpie markers, but should fit many other brands of markers and other roughly marker-shaped objects. I won't judge, you do you.\n\nThese are tall enough to keep the pens from falling out, but securing with magnets or screws is **strongly** recommended!\n\n**Regular version**: Fits standard Sharpie markers and other round, slim objects with a diameter of 12mm or less, like brushes and test tubes.\n\n**Chisel version**: Fits chisel-tip Sharpies, paint pens, and other stuff with a cross-section that fits a 16x22mm ellipse.\n\n**Magnum version**: Fits the girthiest of Sharpies and other extra-thicc 27mm rods. Careful where you point that thing.\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "writing implements holders",
    "grid_x": 1,
    "grid_y": 2
  },
  "7652823233724898706": {
    "id": 7652823233724898706,
    "name": "Gridfinity |  Long Drawer",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20%20Long%20Drawer-200173",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/3c476c2f-8ec2-4831-a11d-b431bc63f8ba/Gridfinity_LongDrawer_Body.png",
    "description": "A 1x3x3 Drawer in a looooong format, based upon the Gridfinity framework developed by Zack Freedman.\n\nSuggest standard printing profiles for the chest, printed with body cavity facing upwards (tall and skinny-like), and printing the drawer piece with the body cavity facing upwards (trough-style) as well.",
    "category": "small storage",
    "grid_x": 1,
    "grid_y": 3
  },
  "7723860215231374552": {
    "id": 7723860215231374552,
    "name": "Parametric Gridfinity Syringe Stand",
    "creator": "LogoiLab",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/LogoiLab/3d-model/Parametric%20Gridfinity%20Syringe%20Stand%20-186433",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/eb7bb7c4-4a8e-4f53-a0c1-7c8dbb9c24df/gridfinity_syringe_holder_base.png",
    "description": "A gridfinity based syringe stand that can support 5-35cc syringes of various sizes with or without their needles. Use the SCAD files to parameterize your print.\n\nThe base has a shallow recess to collect any accidental drips for easy cleaning. I have left the outer gridfinity flange on the base as a safety measure in case the syringe completely leaks out.\n\nThe holder ring on the stand has integral supports for better printing without support material. These double as holes to store most spare luer lock based needles and applicators.\n\nI use this for my 10cc Amtech flux syringes.\n\nThe holder STL is for 15mm diameter syringes with a need+barrel length of 110mm. The base STL is interchangeable.\n\nThe holder portion can take some force to press into the base as it has press-fit latching notches.\n\nhttps://doslabelectronics.com/\nhttps://github.com/LogoiLab",
    "category": "parametric",
    "grid_x": 1,
    "grid_y": 1
  },
  "7806351340561536309": {
    "id": 7806351340561536309,
    "name": "Gridfinity Flip-Top Container",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20Flip-Top%20Container-192949",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/3b1ca021-81fd-434d-870d-4606ac2afd8a/FlipUp_Bottom.png",
    "description": "A 1x3x3 flip-top, snap-held container based upon the Gridfinity framework developed by Zack Freedman.\n\nSuggest standard printing profiles with no supports for the bottom piece, and to print the top piece vertically with the fat part on the bottom, using minimal supports under the fat part.\n\n",
    "category": "small storage",
    "grid_x": 1,
    "grid_y": 3
  },
  "7835732351879715263": {
    "id": 7835732351879715263,
    "name": "Parametric Gridfinity Small Parts Containment Tray",
    "creator": "LogoiLab",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/LogoiLab/3d-model/Parametric%20Gridfinity%20Small%20Parts%20Containment%20Tray%20-186431",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/79845600-cff6-49b4-98fc-bff18b05ea3b/gridfinity_small_parts_containment_lid.png",
    "description": "This is similar to other parametric models, but this is OpenSCAD based.\n\nTurns out its hard to fit a grid of a different dimension inside another grid of a different dimension reliably without relative alignment. But it's been done, so here you go.\n\nThis is a gridfinity 1x2 with 2x3 tray routes for six total trays.\n\nThere is also a lid that can be printed should you want to keep your parts contained and separated.\n\n~If I find a bigger use for this I will fix the code to be properly parametric.~ It has been done.\n\nhttps://doslabelectronics.com/\nhttps://github.com/LogoiLab",
    "category": "parametric",
    "grid_x": 1,
    "grid_y": 1
  },
  "8073009781955828140": {
    "id": 8073009781955828140,
    "name": "Gridfinity Baseplates",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/b133e90e-2c0c-4210-a309-78acc114fee3/62cc32cbfb1438e5366d5a5e87fbb17a483a7275f698ed67eb0fa0a06242e2c0/Frame_2x4.png",
    "description": "Straighten out your workshop with Gridfinity modular storage - deploy these plates anywhere you need some order!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- Frame: https://a360.co/3ccHbsg\n- Weighted Plate: https://a360.co/3uCJ2gR\n\nThe foundation of every Gridfinity setup is a baseplate, and these let you drop storage where you need it most.\n\n**Frame**: The absolutely minimal no-frills baseplate. No room for screws or magnets, but saves filament and headroom. If your storage unit is on a steel surface, you can still put magnets in the storage blocks to keep them from sliding.\n\n**Weighted**: Heavy, sturdy baseplate perfect for desktops, shelves, and other places where knocking stuff over is a big problem. \n\nSecure blocks permanently with [M3 screws,](https://amzn.to/37IaXTg) or temporarily with [6x2mm magnets](https://amzn.to/37Ihopq). Add [rubber feet](https://amzn.to/3LZv4v5) to keep the whole shebang from sliding, and [metal tire weights ](https://amzn.to/3uAzH9f)to drop the center of gravity and prevent wipeouts. You don't need to install every magnet, foot, and weight! Just use enough for your needs.\n\nA Prusa i3 Mk3 can print up to a 5x5 grid. No matter what you use, make sure your bed adhesion and release is dialed in - these love to curl, and their high surface area can make them challenging to remove.\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider plates can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "baseplates",
    "grid_x": 1,
    "grid_y": 1
  },
  "8648681654930762294": {
    "id": 8648681654930762294,
    "name": "Gridfinity | Press n' Open Bin",
    "creator": "Machenna56k",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/Machenna56k/3d-model/Gridfinity%20%7C%20Press%20n%27%20Open%20Bin-204286",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/12d8d3f0-59e7-44a8-a63e-b8da573edd3a/ca7c7fa6a4d2a6a2215302a633cfd30abcd1d3584a116592e46adfff3b296b54/Flip2_Bottom-Divided.png",
    "description": "A 2x1x1u Flip-top container that is opened by gently pressing at the back-top of the bin. Suggest standard printing profiles with 2-3 walls and top layers.\n\nGridfinity by Zack Freedman.",
    "category": "small storage",
    "grid_x": 2,
    "grid_y": 1
  },
  "8760752383244820555": {
    "id": 8760752383244820555,
    "name": "Gridfinity Divider Bins",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/3d0da746-afc9-4b69-b05f-53fb3f1341f4/Divider_Box_1x1x2_1-Compartment.png",
    "description": "Versatile open-top storage blocks for the Gridfinity modular workshop storage system - multiple sizes for infinite options!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at  \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source file: https://a360.co/3vbu9B5\n\nThese are perfect for storing small parts and long, thin objects like needle files, and you can stack them as high as you want! The inner surface has a generous scoop to make retrieving parts easy, and the tab fits 12mm label-maker tape.\n\nI've provided a selection of different sizes and divider counts, to give you OPTIONS! Note that none of the compartment sizes overlap - there isn't a two-compartment 4x1 bin because you can just use two one-compartment 2x1 bins.\n\nDimensions in file names are Width x Depth x Height. Width and Depth units are 42mm grid slots, Height is in 7mm units. A Prusa i3 Mk3S can fit a five-unit-wide bin on its plate.\n\nNote that two-unit-high bins don't have labels - they would cut too far into the usable storage area.\n\nBrims and support are not required, and these can be printed in any filament with an 0.6mm or smaller nozzle. Wider bins can curl, so maximize your bed adhesion if you're going big!\n\n**Gridfinity Tips!**\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "small storage",
    "grid_x": 1,
    "grid_y": 2
  },
  "8965363893237181650": {
    "id": 8965363893237181650,
    "name": "Gridfinity iFixit Mako + ES121 Screwdriver Holders",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20iFixit%20Mako%20+%20ES121%20Screwdriver%20Holders-60744",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/d4a7e279-f641-4c01-809f-586ef9966f61/iFixit_Driver_Set_Gen_2_Holder.png",
    "description": "Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- ES121 Holder: https://a360.co/3KLQziI\n- Gen 1 Holder: https://a360.co/3rj30Li\n- Gen 2 Holder: https://a360.co/3jxCNVb\n\nThese holders store the popular, high-quality iFixit Mako screwdriver kit, the old-skool iFixit screwdriver set, and the ES121 open-hardware electric screwdriver. Open-source screwdriver, what a time to be alive.\n\nPrint the ones that work with your stuff!\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "tool holders",
    "grid_x": 2,
    "grid_y": 4
  },
  "9165983091551382590": {
    "id": 9165983091551382590,
    "name": "Gridfinity Nippers + Strippers + Pliers Racks",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Nippers%20%2B%20Strippers%20%2B%20Pliers%20Racks-61120",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/f27fd742-0083-4185-8498-1d74b6057275/Nipper_Holder_x6.png",
    "description": "Safely grab the right tool with the Gridfinity modular workshop storage system!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8\nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- Nipper Holder: https://a360.co/37jchw3\n- Stripper Holder: https://a360.co/3Erq2oV\n\nThese racks pack tons of hand tools into a small area, positioned so you can safely see and grab the business ends. These work great for nippers, flush cutters, wire strippers, pliers, scissors, crimpers, nibblers, cutters, and punch-down tools.\n\n*These storage blocks are extra-big and tend to curl! Use a brim and ensure good bed adhesion.* \n\n**Nipper Holder**: Holds six tools about 80mm from handle to handle. If the tool is spring-loaded, the undercut will keep it from falling out. This can be mounted sideways to store five tools.\n\n**Stripper Holder**: Holds two wire strippers or other long, slim hand tools up to 18mm thicc. I've prepared two sizes - 200mm is your usual multi-hole wire stripper, and 160mm fits many crimpers and termination tools. Both should fit on most printers.\n\n**Gridfinity Tips!**\n- Use any filament with an 0.6mm or smaller nozzle. \n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "tool holders",
    "grid_x": 2,
    "grid_y": 4
  },
  "9327260213286645985": {
    "id": 9327260213286645985,
    "name": "Gridfinity CNC Tool Holders",
    "creator": "ZackFreedman",
    "license": "unimplemented",
    "url": "https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20CNC%20Tool%20Holders-60739",
    "image_url": "https://storage.googleapis.com/thangs-thumbnails/production/af8cbd35-f2d2-4d24-a21d-d83dbb4e2205/CNC_Tool_Holder%2C_Bulk%2C_0.125in.png",
    "description": "CNC bit storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!\n\nGridfinity is the ultimate organizer for your whole workshop! Learn more at \nFind more Gridfinity accessories at https://bit.ly/3E2NxnZ\n\nParametric source files: \n- Jewel Case: https://a360.co/3Jw4Bnd\n- Bulk Holder: https://a360.co/37IQCgV\n- Tubes: https://a360.co/3rFWH4X\n\nThese holders securely store CNC tools, drill bits, and other things with 1/8, 1/4, and 3mm shanks.\n\nThe 1/8 and 1/4 Bulk versions hold up to 77 and 21 bits, respectively. These point the bits straight up, so you can't stack on top! Be careful not to hurt yourself!\n\nThe Tube version holds 12 bits in their protective packages. You can stack other blocks on top of this.\n\nThe Jewel Insert version holds four detachable sleeves from snap-together jewel case packaging. These usually hold 10 bits. You can stack other blocks on top of this.\n\n**Gridfinity Tips!**\n- No brims or support required! \n- Use any filament with an 0.6mm or smaller nozzle. \n- Wider bins can curl, so maximize your bed adhesion if you're going big!\n- All storage blocks are compatible with all baseplates!\n- Most storage blocks are stackable!\n- You can add 6x2mm magnets to the corners! They won't magnetize the contents.\n- You can also use M3 screws in the corners.",
    "category": "tool holders",
    "grid_x": 3,
    "grid_y": 3
  },
  "6763196792352536101":{
    "id": 6763196792352536101,
    "name": "Dual-Height Tweezers & Feeler Gauge Holder",
    "creator": "Jessica Mauerhan",
    "license": "",
    "url": "https://www.printables.com/model/292781-gridfinity-dual-height-tweezers-feeler-gauge-holde",
    "image_url": "https://media.printables.com/media/prints/292781/images/2572099_287cd0b2-f623-425c-b6e1-37e90fcb042d/thumbs/cover/1280x960/jpg/pxl_20221010_224312739portrait.webp",
    "description": "Gridfinity compatible holder for two tall thin items and two shorter thin items, such as tweezers and feeler guage!",
    "category": "tool holders",
    "grid_x": "1",
    "grid_y": "1"
  },
  "6253505778236011554":{
    "id": 6763196792352536101,
    "name": "Nozzle Cleaning Kit Holder",
    "creator": "Jessica Mauerhan",
    "license": "",
    "url": "https://www.printables.com/model/339385-gridfinity-nozzle-cleaning-kit-holder",
    "image_url": "https://media.printables.com/media/prints/339385/images/2899095_5a5acbbc-fe55-4352-9e39-b853feeef762/thumbs/cover/1280x960/jpg/pxl_20221213_170536747.webp",
    "description": "Gridfinity compatible holder for a nozzle brush, nozzle socket wrench tool, and tubes of cleaning pins.",
    "category": "tool holders",
    "grid_x": "1",
    "grid_y": "1"
  }
}