hacks-guide
diff --git a/‎docs/ar_SA/_include/ctrnand-datayeet.md‎
Lines changed: 13 additions & 17 deletions b/‎docs/ar_SA/_include/ctrnand-datayeet.md‎
Lines changed: 13 additions & 17 deletions
diff --git a/‎docs/ar_SA/_include/ctrtransfer-main.md‎
Lines changed: 6 additions & 0 deletions b/‎docs/ar_SA/_include/ctrtransfer-main.md‎
Lines changed: 6 additions & 0 deletions
diff --git a/‎docs/ar_SA/get-started.md‎
Lines changed: 1 addition & 0 deletions b/‎docs/ar_SA/get-started.md‎
Lines changed: 1 addition & 0 deletions
diff --git a/‎docs/ar_SA/installing-boot9strap-(mset9-cli).md‎
Lines changed: 5 additions & 5 deletions b/‎docs/ar_SA/installing-boot9strap-(mset9-cli).md‎
Lines changed: 5 additions & 5 deletions
diff --git a/‎docs/ar_SA/installing-boot9strap-(mset9-play-store).md‎
Lines changed: 8 additions & 8 deletions b/‎docs/ar_SA/installing-boot9strap-(mset9-play-store).md‎
Lines changed: 8 additions & 8 deletions
diff --git a/‎docs/ar_SA/installing-boot9strap-(super-skaterhax).md‎
Lines changed: 36 additions & 40 deletions b/‎docs/ar_SA/installing-boot9strap-(super-skaterhax).md‎
Lines changed: 36 additions & 40 deletions
diff --git a/‎docs/ar_SA/key-information.md‎
Lines changed: 6 additions & 0 deletions b/‎docs/ar_SA/key-information.md‎
Lines changed: 6 additions & 0 deletions
@@ -8,22 +8,18 @@ This process will reset your Mii data. If you wish to save any Miis that you hav
 
 1. Power off your console
 2. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
-3. Navigate to `[0:] SDCARD` -> `gm9` -> `in`
-4. Press (X) on the CTRTransfer image `.bin` to delete it
-5. Press (A) to confirm
-6. Press (B) a few times to go back to the main menu
-7. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `<ID0>` -> `sysdata`
+3. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `<ID0>` -> `sysdata`
     - The `<ID0>` will be a folder with a 32-character long name
-8. Use the D-Pad to highlight `00010017`
-9. Press (Right Shoulder) + (A) to bring up the folder options
-10. Select "Copy to 0:/gm9/out"
-11. Press (A) to continue
-12. While still highlighting `00010017`, press (X) to delete it
-13. Press (A) to confirm
-14. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
-15. Once the file has been deleted, press (A) to continue
-16. Press (A) to relock write permissions if prompted
-17. Press (Start) to reboot your console
-18. Your console will load into the initial setup menu
+4. Use the D-Pad to highlight `00010017`
+5. Press (Right Shoulder) + (A) to bring up the folder options
+6. Select "Copy to 0:/gm9/out"
+7. Press (A) to continue
+8. While still highlighting `00010017`, press (X) to delete it
+9. Press (A) to confirm
+10. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
+11. Once the file has been deleted, press (A) to continue
+12. Press (A) to relock write permissions if prompted
+13. Press (Start) to reboot your console
+14. Your console will load into the initial setup menu
     - This is expected behaviour. You have not lost any of your game data
-19. Complete the initial setup menu by following the prompts on your console's screen
+15. Complete the initial setup menu by following the prompts on your console's screen
@@ -15,3 +15,9 @@
 13. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
     - Updates while using B9S + Luma (what you have) are safe
     - If this gives you an error, set your DNS settings to "auto"
+
+::: info
+
+At this point, you may remove the CTRTransfer `.bin` and `.bin.sha` files  from the `/gm9/in/` folder to reclaim space on your SD card.
+
+:::
@@ -1,6 +1,7 @@
 ---
 noneSelected: System model is required.
 invalidVersion: This doesn't seem to be a valid system version.
+otherPrefix: (Other)
 head:
   - - script
     - src: /assets/js/common.js
 
@@ -2,7 +2,7 @@
 
 :::details Technical Details (optional)
 
-[MSET9](https://github.com/zoogie/MSET9) is an exploit for the System Settings application developed by [zoogie](https://github.com/zoogie). It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be _any_ name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+[MSET9](https://github.com/zoogie/MSET9) is an exploit for the System Settings application developed by [zoogie](https://github.com/zoogie). It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be _any_ name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the console.
 
 :::
 
@@ -16,7 +16,7 @@ This page requires a computer running Windows, Linux, or macOS. If you have an A
 
 ## What You Need
 
-- The latest release of [MSET9](https://github.com/hacks-guide/MSET9/releases/latest)
+- The latest release of [MSET9](https://github.com/hacks-guide/MSET9/releases/latest) (the MSET9 `.zip` file)
 - Any 3.x version of [Python](https://www.python.org/downloads/) **installed on your computer**
     - If you are on Windows, Python from the Microsoft Store cannot be used. Please install a version from python.org.
     - If you are on Linux or macOS, you may already have Python 3. Check by opening a Terminal window and entering `python3 -V`. If this returns a version number, it will work for this guide.
@@ -31,7 +31,7 @@ On this page, you will use the MSET9 script, which is used to trigger MSET9. Whi
 
 ### Section I - Prep Work
 
-In this section, you will prepare the MSET9 exploit by **temporarily** creating a new HOME Menu profile with no user data, and then setting up that profile with only the minimum data required for MSET9 to trigger. Your existing user data will disappear, but will come back when you are finished with this page.
+In this section, you will prepare the MSET9 exploit by **temporarily** creating a new HOME Menu profile with almost no user data, and then setting up that profile with only the minimum data required for MSET9 to trigger. Your existing user data will disappear, but will come back when you are finished with this page.
 
 1. Insert your SD card into your computer
 2. Copy everything from the MSET9 `.zip` to the root of your SD card, overwriting any existing files
@@ -67,7 +67,7 @@ In this section, you will prepare the MSET9 exploit by **temporarily** creating
 3. After reviewing the disclaimer, type `1` again and press Enter to accept it
     - If you get an error, check the [troubleshooting](troubleshooting-mset9), then try again
 4. If you see the message "Created hacked ID1.", press Enter to close the MSET9 script
-    - Your 3DS will appear to have no data / no user-installed apps on HOME Menu. **This is expected.** Your data will come back at a later step
+    - Your console will appear to lose most data / no user-installed apps on HOME Menu. **This is expected.** Your data will come back at a later step
 5. Reinsert your SD card into your console
 6. Power on your console
 7. Open Mii Maker
@@ -114,7 +114,7 @@ These instructions must be followed **EXACTLY**, so double-check EVERYTHING you
 3. Navigate to `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([image](/images/screenshots/mset9/settings-extdata.png))
 4. **Do not press any buttons or touch the screen**
 5. **With the console STILL ON, and without pressing any buttons or touching the screen**, remove your SD card from your console
-    - The menu will refresh and say that no SD card is inserted
+    - The menu will refresh and say that no SD card is inserted, which is expected
 6. Insert your SD card into your computer
 
 <!--@include: ./_include/mset9-chorus.md -->
 
@@ -2,7 +2,7 @@
 
 :::details Technical Details (optional)
 
-[MSET9](https://github.com/zoogie/MSET9) is an exploit for the System Settings application developed by [zoogie](https://github.com/zoogie). It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be _any_ name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+[MSET9](https://github.com/zoogie/MSET9) is an exploit for the System Settings application developed by [zoogie](https://github.com/zoogie). It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be _any_ name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the console.
 
 :::
 
@@ -22,25 +22,25 @@ On Android phones/tablets, the minimum Android version required is 6.0 (Marshmal
 
 ## What You Need
 
+- The latest release of [MSET9](https://github.com/hacks-guide/MSET9/releases/latest) (the MSET9 `.zip` file)
 - The following applications installed from the Google Play Store:
     - [MSET9 Installer](https://play.google.com/store/apps/details?id=moe.saru.homebrew.console3ds.mset9_installer_android)
     - [ZArchiver](https://play.google.com/store/apps/details?id=ru.zdevs.zarchiver)
     - If you wish, you can sideload these applications instead
-- The latest release of [MSET9](https://github.com/hacks-guide/MSET9/releases/latest) (the MSET9 `.zip` file)
 
 ## Instructions
 
 ### Section I - Prep Work
 
-In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+In this section, you will prepare the MSET9 exploit by **temporarily** creating a new HOME Menu profile with almost no user data, and then setting up that profile with only the minimum data required for MSET9 to trigger. Your existing user data will disappear, but will come back when you are finished with this page.
 
 1. Insert your SD card into your phone/tablet/computer
 
 2. Copy everything from the MSET9 `.zip` to the root of your SD card, overwriting any existing files:
 
     - Open ZArchiver
     - If prompted, [allow ZArchiver to access files on your SD card](/images/screenshots/mset9/zarchiver-allow.png)
-    - Navigate to where the downloaded MSET9 MSET9 `.zip` is located ([likely in the Downloads folder](/images/screenshots/mset9/zarchiver-zip-location.png))
+    - Navigate to where the downloaded MSET9 `.zip` is located ([likely in the Downloads folder](/images/screenshots/mset9/zarchiver-zip-location.png))
     - Select the MSET9 `.zip`, then select "Extract..." ([image](/images/screenshots/mset9/zarchiver-extract-1.png))
     - Navigate to your SD card, then tap the blue 'down arrow' icon to extract the files to the root of your SD card ([image](/images/screenshots/mset9/zarchiver-extract-2.png))
 
@@ -67,17 +67,17 @@ In this section, you will prepare the SD card data necessary for the MSET9 explo
 
 10. If you see the prompt of `Hax ID1 Created`, tap OK to continue
     - If you get an error, check the [troubleshooting](troubleshooting-mset9), then try again
-    - Your 3DS will appear to lose most data / no user-installed apps on HOME Menu. This is expected. Your data will come back at a later step
+    - Your console will appear to lose most data / no user-installed apps on HOME Menu. **This is expected.** Your data will come back at a later step
 
 11. Reinsert your SD card into your console
 
 12. Power on your console
 
 13. Open Mii Maker
 
-14. Wait for your console to reach the "Welcome to Mii Maker" screen, then exit Mii Maker
+14. Wait for your console to reach the [Welcome to Mii Maker](/images/screenshots/mset9/mii-welcome.png) screen, then exit Mii Maker and return to the HOME Menu
     - You may see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created
-    - If you just reach the normal Mii Maker screen, exit Mii Maker and return to the HOME Menu
+    - If you just reach the [normal](/images/screenshots/mset9/mii-existing.png) Mii Maker screen, then the data already exists. Exit Mii Maker and return to the HOME Menu
 
 15. Launch System Settings and navigate to `Data Management` -> `Nintendo 3DS` -> `Software` -> Reset ([image](/images/screenshots/database-reset.jpg))
     - This will not wipe any of your data
@@ -132,7 +132,7 @@ In this section, you will install custom firmware onto your console.
 
 ### Section IV - Removing MSET9
 
-In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
+In this section, you will remove MSET9 to prevent further issues and to restore your user data (games, themes, etc). (This will not remove the custom firmware that you have just installed.)
 
 ::: danger
 
 
@@ -10,14 +10,6 @@ head:
 
 # Installing boot9strap (super-skaterhax)
 
-::: danger
-
-# This method is currently **not working** due to server-side SSL certificate changes. The timeline for a fix is unknown. In the meantime, follow [Installing boot9strap (MSET9)](installing-boot9strap-\(mset9\)) instead.
-
-[![distraction so that people don't look at the rest of the page](/images/distraction.gif)](installing-boot9strap-\(mset9\))
-
-:::
-
 :::details Technical Details (optional)
 
 For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
@@ -28,9 +20,9 @@ For technical details on the exploits that you will be using on this page, see [
 
 Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.15.0 and above in all regions.
 
-::: warning
+::: info
 
-The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the console you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+This exploit is known to be inconsistent: it works for some people, but not others. If you prefer to use a more consistent exploit (which may take longer, but will have the same end result), follow [MSET9](installing-boot9strap-\(mset9\)) instead.
 
 :::
 
@@ -73,49 +65,53 @@ In this section, you will copy the files needed to trigger both super-skaterhax
     - JPN: 日本, 設定しない
     - KOR: 대한민국, 설정하지 않음
 
-10. Exit System Settings
+10. Navigate to "Date & Time"
+
+11. Set "Today's Date" and "Current Time" to the current date and time in your timezone
+
+12. Exit System Settings
 
 #### Section II - super-skaterhax
 
 In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
 
 ::: info
 
-If you haven't already, make sure you have a working Internet connection set up on your console.
+A video detailing these steps is available [here](https://www.youtube.com/watch?v=DEcZB72vJts).
 
 :::
 
-1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
-    - If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
-2. Tap the QR code button and scan one of the following QR codes for your console's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
-    - If you get a security certificate warning, please ensure that the system date is today's
-3. Press (Select) to open the bookmark tab
-    - If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
-4. Tap "Bookmark this page"
-5. Press (B) once to return to the browser
-6. Press (ZR) to open the tab list
-    - If your (ZR) button does not respond, tap the two overlapped squares near the bottom-right corner of the screen
-7. Make sure that the only tab open is the super-skaterhax website
-    - This tab should be highlighted in blue on the tab list
-    - If other tabs are open, close them
-8. Press (B) once to return to the browser
-9. Press (Start) to open the context menu
-    - If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
-10. Tap on "Settings"
-11. Tap on "Delete Cookies"
-12. Press (A) to continue
-13. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
-14. Select the "GO GO!" button on the top of the bottom screen
-15. Press (A) to dismiss the [popup](/images/screenshots/skaterhax/skater-popup.png)
-    - If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
-    - If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
-    - If your console [shows the word Text on the top-left corner of the bottom screen](/images/screenshots/skaterhax/skater-old3ds.png), you have an Old 3DS and this exploit **will not work on your device**. If this is the case, you should follow [MSET9](installing-boot9strap-\(mset9\)) instead
-    - If you get another error, try again up to 5 times, and if it still doesn't work, [follow this troubleshooting guide](troubleshooting-super-skaterhax)
-16. Your console will have booted into the Homebrew Launcher
+1. Open the Internet Browser
+2. Tap the 3-line (☰) icon on the bottom-right corner of the screen
+3. Tap `Settings` -> scroll down -> `Reset Save Data` -> `Clear All` -> `Clear` -> `OK`
+    - The browser will close
+4. Reopen the Internet Browser
+5. Tap `Next` -> `Google` -> `OK` -> `OK`
+6. Tap on the address bar at the top of the bottom screen
+7. Enter the URL corresponding to your console's region:
+    - **USA/EUR/JPN**: `https://skater.686178.xyz/go/super`
+    - **KOR**: `https://skater.686178.xyz/go/korea`
+8. Tap "Open"
+    - You should see the text "GO GO!". Do not click on it yet
+9. Tap the 3-line (☰) icon on the bottom-right corner of the screen
+10. Tap on "Add to Bookmarks"
+11. Tap the 3-line (☰) icon on the bottom-right corner of the screen
+12. Tap on `Settings` -> `Delete Cookies` -> `Yes`
+13. Press (Home) to return to the HOME Menu, then immediately reopen the Internet Browser
+14. Wait for the page to fully load, then tap the "GO GO!" button on the top of the bottom screen
+15. Wait for the page to fully load, then press (A) to dismiss the [popup](/images/screenshots/skaterhax/skater-popup.png)
+16. If your console displays:
+    - **"The Homebrew Launcher" screen**: Continue to the next step
+    - **A white "Error has occurred" message box**: The exploit failed due to random chance. Open System Settings, change the language to a different one (if possible), then retry this section. You may have to repeat this sequence up to ten times
+        - On JPN/KOR region consoles, there is only one language setting. On those consoles, you should open System Settings, close it, then retry this section
+        - If the exploit is still unsuccessful after five attempts, there may be a problem with your files or prep work. Ensure that region and date/time are correct, and that you have been following this section **exactly**. If you used WinRAR to extract files to the SD card, re-extract the files using File Explorer or 7-zip instead
+        - If the exploit is still unsuccessful after ten attempts, follow [MSET9](installing-boot9strap-\(mset9\)) instead
+    - **A black screen that says "An error has occurred"**: Your file placement is incorrect. Ensure that the super-skaterhax files are on the root of the SD card
+    - **A yellow screen**: Homebrew Launcher failed to open due to random chance. Hold the POWER button until the console turns off, then retry this section
+    - **[The word "Text"](/images/screenshots/skaterhax/skater-old3ds.png)**: You have an Old 3DS, where this exploit **does not work**. If this is the case, you should follow [MSET9](installing-boot9strap-\(mset9\)) instead
 17. Launch nimdsphax from the list of homebrew
 18. If the exploit was successful, you will have booted into SafeB9SInstaller
     - If your console freezes on a red or green screen, hold the POWER button until it turns off, then retry this section
-    - This may take up to five attempts
 
 #### Section III - Installing boot9strap
 
 
@@ -142,6 +142,12 @@ When you are told to "copy (file) from (file).zip", that means that you need to
 
 On most operating systems, you can extract files by double-clicking the file. If this doesn't work, you can install a reputable third-party extraction tool like [7-zip](https://7-zip.org/) instead.
 
+::: warning
+
+The Windows application "WinRAR" is specifically known to cause compatibility issues with the 3DS, particularly with custom firmware installation exploits. If you are on a Windows computer, you should use either the default File Explorer or 7-zip to extract files.
+
+:::
+
 ::::
 
 :::: details What are file extensions?