diff --git a/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-nradio-wt9103-2nd.dts b/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-nradio-wt9103-2nd.dts new file mode 100644 index 00000000000..0e32b468ec0 --- /dev/null +++ b/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-nradio-wt9103-2nd.dts @@ -0,0 +1,294 @@ +//Thanks Zy143L's work +/dts-v1/; +#include "mt7981.dtsi" + +/ { + model = "NRadio C8-660-2nd"; + compatible = "nradio,wt9103", "mediatek,mt7981"; + + aliases { + led-boot = &status_blue; + led-failsafe = &status_blue; + led-running = &status_blue; + led-upgrade = &status_blue; + }; + + chosen { + bootargs = "console=ttyS0,115200n1 loglevel=8 \ + earlycon=uart8250,mmio32,0x11002000"; + }; + + gpio-export { + compatible = "gpio-export"; + + cpepower { + gpio-export,name = "cpe-pwr"; + gpio-export,output = <0>; + gpios = <&pio 25 GPIO_ACTIVE_LOW>; + }; + + cpesel0 { + gpio-export,name = "cpe-sel0"; + gpio-export,output = <1>; + gpios = <&pio 24 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "wps"; + linux,code = ; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status_blue: status { + label = "hc:blue:status"; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + cmode5 { + label = "hc:blue:cmode5"; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + + cmode4 { + label = "hc:blue:cmode4"; + gpios = <&pio 12 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "hc:blue:wifi"; + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + }; + }; + + nmbm_spim_nand { + compatible = "generic,nmbm"; + + #address-cells = <1>; + #size-cells = <1>; + + lower-mtd-device = <&spi_nand>; + forced-create; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x00000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x0100000 0x0080000>; + }; + + partition@180000 { + label = "factory"; + reg = <0x180000 0x0180000>; + }; + + partition@300000 { + label = "bdinfo"; + reg = <0x300000 0x0080000>; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x0200000>; + }; + + partition@580000 { + label = "ubi_1st"; + reg = <0x580000 0x4000000>; + }; + + partition@4580000 { + label = "app_data"; + reg = <0x4580000 0x1000000>; + }; + + partition@5580000 { + label = "ubi"; + reg = <0x5580000 0x18A80000>; + }; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + spi_nand: spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + reg = <0>; + spi-max-frequency = <52000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + }; +}; + +&pio { + status = "okay"; + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: phy@5 { + // compatible = "ethernet-phy-ieee802.3-c45"; + compatible = "ethernet-phy-id67c9.de0a"; + reg = <5>; + reset-gpios = <&pio 7 1>; + reset-assert-us = <600>; + reset-deassert-us = <20000>; + phy-mode = "2500base-x"; + }; + + phy6: phy@6 { + // compatible = "ethernet-phy-ieee802.3-c45"; + compatible = "ethernet-phy-id67c9.de0a"; + reg = <21>; + reset-gpios = <&pio 8 1>; + reset-assert-us = <600>; + reset-deassert-us = <20000>; + phy-mode = "2500base-x"; + }; + + switch@0 { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@5 { + reg = <5>; + label = "lan4"; + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; +}; + +&xhci { + status = "okay"; +}; + +&hnat { + mtketh-wan = "eth1"; + mtketh-lan = "lan"; + mtketh-max-gmac = <2>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/target/linux/mediatek/image/mt7981.mk b/target/linux/mediatek/image/mt7981.mk index 79dfe1fa4c0..44a09d8af82 100644 --- a/target/linux/mediatek/image/mt7981.mk +++ b/target/linux/mediatek/image/mt7981.mk @@ -794,6 +794,23 @@ define Device/nradio_wt9103_512m endef TARGET_DEVICES += nradio_wt9103_512m +define Device/nradio_wt9103_2nd + DEVICE_VENDOR := NRADIO + DEVICE_MODEL := WT9103 (with Second System) + DEVICE_DTS := mt7981-nradio-wt9103-2nd + DEVICE_DTS_DIR := $(DTS_DIR)/mediatek + SUPPORTED_DEVICES := nradio,wt9103 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 131072k + KERNEL_IN_UBI := 1 + IMAGES += factory.bin + IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += nradio_wt9103_2nd + define Device/routerich_ax3000 DEVICE_VENDOR := Routerich DEVICE_MODEL := AX3000