Anyone878uv and TX CC settinga

[K4HNT]

I apologize if this has been asked prior, I searched but did not see anything related.

I am a new qDMR user and pretty much a DMR newbie so this may be and probably is simple ignorance on my part. I have a duplex DMR hotspot which is set for Brandmeister, TGIF and cc1. I also use an Anytone 878uv radio. I used qDMR to set the radio up and everything looks good except it wouldn't activate the hotspot. I tested different setting and it would appear the tx cc is not set. If I set that manually on the radio everything is good. I can not find a setting in qDMR to address this, am I missing something on a setting somewhere?

Thanks for any input you may have,
Terry K4HNT

[hmatuschek]

This is an issue with AnyTone breaking their own codeplugs with minor firmware updates. This problem was introduced with FW version 3.06 and was fixed for qdmr in issue #561. So the next release will contain that fix.

You may compile qdmr from the sources or revert the FW to version 3.05.

[K4HNT]

Thank you so much!!!
I will look into both options.. The compile option intrigues me as I have not compiled anything in the Mac world so good opportunity to learn more new stuff :)

Anyone has been the worst breaking things with releases, even their own clunky software at times. I love the simplicity of qDMR and the explanations the manual gives about why something is used and how it affects the overall transmission.

[allesand]

@K4HNT : Re: #561 - If you only need it in one or a few channels, you can set it in the channel settings in the radio via the front panel also