HAOS 15.1 SSD I/O Error - Kernel Missing Drivers?

[tomd-tc]

Describe the issue you are experiencing

I was previously running Home Assistant 14.2 without an issue.

I had tried updated initially to Home Assistant 15.1 (and tried Home Assistant 15.1 - kernel 6.12.20) and all of the sudden disk I/O errors began to appear.

Error messages that appeared:
failed command: read FPDMA queue, status DRDY
I/O error, dev, sda, sector XXX, op 0x0 (READ) flags 0x80700 phys_seg 1 (or 7) prio class 0

The possibility of the storage module being faulty is ruled out when it was tested:

• with another 512GB SSD module that I know works. Same issue appeared
• tested with Proxmox: no errors at all (kernel 6.8.12)

Attaching "screenshots" (apologies for the quality) of error messages observed in HAOS.

What operating system image do you use?

generic-x86-64 (Generic UEFI capable x86-64 systems)

What version of Home Assistant Operating System is installed?

15.1

Did the problem occur after upgrading the Operating System?

Yes

Hardware details

512GB SSD NGFF 2280 SATA M2 Storage
I/O Chipset: IT8613E
CPU: Intel N100

Steps to reproduce the issue

1. Install HAOS 15.1 per instructions for x86_64 on your website to a SSD drive

2. Attempt to wait for HA OS terminal to appear.

3. Watch the errors fill the screen and HA OS not properly boot.

4. Install HAOS 14.2, reboot and the welcome terminal appears as expected.
   ...

Anything in the Supervisor logs that might be useful for us?

N/A

Anything in the Host logs that might be useful for us?

Please see screenshots in description.

System information

No response

Additional information

No response

[tomd-tc]

To add more clarity, when I revert to Slot A (HA OS 14), the system boots and functions as expected. When I try to boot into Slot B (HA OS 15.1), the I/O issues begin.

[sairon]

This is a known issue with some SSDs, see the linked issue for details. Could you share details about sda from the Hardware page (no matter what OS version is it from)?