fablo-config-hlf3-bft-1orgs-1chaincode.json.test.ts.snap

// Jest Snapshot v1, https://goo.gl/fbAQLP

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/.gitignore from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"/config
/crypto-config
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/configtx.yaml from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"################################################################################
#   SECTION: Capabilities
################################################################################
Capabilities:
    Channel: &ChannelCapabilities
        V3_0: true
    Orderer: &OrdererCapabilities
        V2_0: true
    Application: &ApplicationCapabilities
        V2_5: true

################################################################################
#   CHANNEL Defaults
################################################################################
Channel: &ChannelDefaults
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"
    Capabilities:
        <<: *ChannelCapabilities

################################################################################
#   Section: Organizations
################################################################################
Organizations:
    - &Orderer
      Name: OrdererMSP
      ID: OrdererMSP
      MSPDir: crypto-config/peerOrganizations/orderer.example.com/msp
      OrdererEndpoints:
          - orderer0.group1.orderer.example.com:7030
          - orderer1.group1.orderer.example.com:7031
          - orderer2.group1.orderer.example.com:7032
          - orderer3.group1.orderer.example.com:7033
      Policies:
          Readers:
              Type: Signature
              Rule: "OR('OrdererMSP.member')"
          Writers:
              Type: Signature
              Rule: "OR('OrdererMSP.member')"
          Admins:
              Type: Signature
              Rule: "OR('OrdererMSP.admin')"
          Endorsement:
              Type: Signature
              Rule: "OR('OrdererMSP.member')"

      AnchorPeers:

    - &Org1
      Name: Org1MSP
      ID: Org1MSP
      MSPDir: crypto-config/peerOrganizations/org1.example.com/msp
      OrdererEndpoints:
          - orderer0.group1.orderer.example.com:7030
          - orderer1.group1.orderer.example.com:7031
          - orderer2.group1.orderer.example.com:7032
          - orderer3.group1.orderer.example.com:7033
      Policies:
          Readers:
              Type: Signature
              Rule: "OR('Org1MSP.member')"
          Writers:
              Type: Signature
              Rule: "OR('Org1MSP.member')"
          Admins:
              Type: Signature
              Rule: "OR('Org1MSP.admin')"
          Endorsement:
              Type: Signature
              Rule: "OR('Org1MSP.member')"

      AnchorPeers:
          - Host: peer0.org1.example.com
            Port: 7041

          - Host: peer1.org1.example.com
            Port: 7042

################################################################################
#   SECTION: Application
################################################################################
Application: &ApplicationDefaults
    Organizations:
    # Policies defines the set of policies at this level of the config tree
    # For Application policies, their canonical path is
    #   /Channel/Application/<PolicyName>
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"
        Endorsement:
            Type: ImplicitMeta
            Rule: "MAJORITY Endorsement"
    Capabilities:
        <<: *ApplicationCapabilities

################################################################################
#   SECTION: Orderer
################################################################################
Orderer: &Group1Defaults
    OrdererType: BFT

    SmartBFT:
        RequestBatchMaxCount: 100
        RequestBatchMaxInterval: 50ms
        RequestForwardTimeout: 2s
        RequestComplainTimeout: 20s
        RequestAutoRemoveTimeout: 3m0s
        ViewChangeResendInterval: 5s
        ViewChangeTimeout: 20s
        LeaderHeartbeatTimeout: 1m0s
        CollectTimeout: 1s
        RequestBatchMaxBytes: 10485760
        IncomingMessageBufferSize: 200
        RequestPoolSize: 100000
        LeaderHeartbeatCount: 10
    ConsenterMapping:
        - ID: 1
          Host: orderer0.group1.orderer.example.com
          Port: 7030
          MSPID: OrdererMSP
          Identity: crypto-config/peerOrganizations/orderer.example.com/peers/orderer0.group1.orderer.example.com/msp/signcerts/orderer0.group1.orderer.example.com-cert.pem
          ClientTLSCert: crypto-config/peerOrganizations/orderer.example.com/peers/orderer0.group1.orderer.example.com/tls/server.crt
          ServerTLSCert: crypto-config/peerOrganizations/orderer.example.com/peers/orderer0.group1.orderer.example.com/tls/server.crt

        - ID: 2
          Host: orderer1.group1.orderer.example.com
          Port: 7031
          MSPID: OrdererMSP
          Identity: crypto-config/peerOrganizations/orderer.example.com/peers/orderer1.group1.orderer.example.com/msp/signcerts/orderer1.group1.orderer.example.com-cert.pem
          ClientTLSCert: crypto-config/peerOrganizations/orderer.example.com/peers/orderer1.group1.orderer.example.com/tls/server.crt
          ServerTLSCert: crypto-config/peerOrganizations/orderer.example.com/peers/orderer1.group1.orderer.example.com/tls/server.crt

        - ID: 3
          Host: orderer2.group1.orderer.example.com
          Port: 7032
          MSPID: OrdererMSP
          Identity: crypto-config/peerOrganizations/orderer.example.com/peers/orderer2.group1.orderer.example.com/msp/signcerts/orderer2.group1.orderer.example.com-cert.pem
          ClientTLSCert: crypto-config/peerOrganizations/orderer.example.com/peers/orderer2.group1.orderer.example.com/tls/server.crt
          ServerTLSCert: crypto-config/peerOrganizations/orderer.example.com/peers/orderer2.group1.orderer.example.com/tls/server.crt

        - ID: 4
          Host: orderer3.group1.orderer.example.com
          Port: 7033
          MSPID: OrdererMSP
          Identity: crypto-config/peerOrganizations/orderer.example.com/peers/orderer3.group1.orderer.example.com/msp/signcerts/orderer3.group1.orderer.example.com-cert.pem
          ClientTLSCert: crypto-config/peerOrganizations/orderer.example.com/peers/orderer3.group1.orderer.example.com/tls/server.crt
          ServerTLSCert: crypto-config/peerOrganizations/orderer.example.com/peers/orderer3.group1.orderer.example.com/tls/server.crt

    BatchTimeout: 2s
    BatchSize:
        MaxMessageCount: 10
        AbsoluteMaxBytes: 99 MB
        PreferredMaxBytes: 512 KB
    Organizations:
    # Policies defines the set of policies at this level of the config tree
    # For Orderer policies, their canonical path is
    #   /Channel/Orderer/<PolicyName>
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"
        # BlockValidation specifies what signatures must be included in the block
        # from the orderer for the peer to validate it.
        BlockValidation:
            Type: ImplicitMeta
            Rule: "ANY Writers"
    Capabilities:
        <<: *OrdererCapabilities

################################################################################
#   Profile
################################################################################
# https://github:com/hyperledger/fabric/blob/master/sampleconfig/configtx.yaml

Profiles:
    # Profile used to create Genesis block for group group1 #
    Group1Genesis:
        <<: *ChannelDefaults
        Orderer:
            <<: *Group1Defaults
            Organizations:
                - *Orderer
            Capabilities:
                <<: *OrdererCapabilities

    # Profile used to create channeltx for my-channel1 #
    MyChannel1:
        <<: *ChannelDefaults
        Orderer:
            <<: *Group1Defaults
            Organizations:
                - *Orderer
        Consortium: SampleConsortium
        Application:
            <<: *ApplicationDefaults
            Organizations:
                - *Org1
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/connection-profiles/connection-profile-orderer.json from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"{
  "name": "fablo-test-network-orderer",
  "description": "Connection profile for Orderer in Fablo network",
  "version": "1.0.0",
  "client": {
    "organization": "Orderer"
  },
  "organizations": {
    "Orderer": {
      "mspid": "OrdererMSP",
      "peers": [
        "peer0.org1.example.com",
        "peer1.org1.example.com"
      ],
      "certificateAuthorities": [
        "ca.orderer.example.com"
      ]
    }
  },
  "peers": {
    "peer0.org1.example.com": {
      "url": "grpcs://localhost:7041",
      "tlsCACerts": {
        "path": "<absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt"
      },
      "grpcOptions": {
        "ssl-target-name-override": "peer0.org1.example.com"
      }
    },
    "peer1.org1.example.com": {
      "url": "grpcs://localhost:7042",
      "tlsCACerts": {
        "path": "<absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt"
      },
      "grpcOptions": {
        "ssl-target-name-override": "peer1.org1.example.com"
      }
    }
  },
  "certificateAuthorities": {
    "ca.orderer.example.com": {
      "url": "https://localhost:7020",
      "caName": "ca.orderer.example.com",
      "tlsCACerts": {
        "path": "<absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/orderer.example.com/ca/ca.orderer.example.com-cert.pem"
      },
      "httpOptions": {
        "verify": false
      }
    }
  }
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/connection-profiles/connection-profile-orderer.yaml from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"name: fablo-test-network-orderer
description: Connection profile for Orderer in Fablo network
version: 1.0.0
client:
  organization: Orderer
organizations:
  Orderer:
    mspid: OrdererMSP
    peers:
      - peer0.org1.example.com
      - peer1.org1.example.com
    certificateAuthorities:
      - ca.orderer.example.com
peers:
  peer0.org1.example.com:
    url: grpcs://localhost:7041
    tlsCACerts:
      path: >-
        <absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
    grpcOptions:
      ssl-target-name-override: peer0.org1.example.com
  peer1.org1.example.com:
    url: grpcs://localhost:7042
    tlsCACerts:
      path: >-
        <absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
    grpcOptions:
      ssl-target-name-override: peer1.org1.example.com
certificateAuthorities:
  ca.orderer.example.com:
    url: https://localhost:7020
    caName: ca.orderer.example.com
    tlsCACerts:
      path: >-
        <absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/orderer.example.com/ca/ca.orderer.example.com-cert.pem
    httpOptions:
      verify: false
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/connection-profiles/connection-profile-org1.json from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"{
  "name": "fablo-test-network-org1",
  "description": "Connection profile for Org1 in Fablo network",
  "version": "1.0.0",
  "client": {
    "organization": "Org1"
  },
  "organizations": {
    "Org1": {
      "mspid": "Org1MSP",
      "peers": [
        "peer0.org1.example.com",
        "peer1.org1.example.com"
      ],
      "certificateAuthorities": [
        "ca.org1.example.com"
      ]
    }
  },
  "peers": {
    "peer0.org1.example.com": {
      "url": "grpcs://localhost:7041",
      "tlsCACerts": {
        "path": "<absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt"
      },
      "grpcOptions": {
        "ssl-target-name-override": "peer0.org1.example.com"
      }
    },
    "peer1.org1.example.com": {
      "url": "grpcs://localhost:7042",
      "tlsCACerts": {
        "path": "<absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt"
      },
      "grpcOptions": {
        "ssl-target-name-override": "peer1.org1.example.com"
      }
    }
  },
  "certificateAuthorities": {
    "ca.org1.example.com": {
      "url": "https://localhost:7040",
      "caName": "ca.org1.example.com",
      "tlsCACerts": {
        "path": "<absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/ca/ca.org1.example.com-cert.pem"
      },
      "httpOptions": {
        "verify": false
      }
    }
  }
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/connection-profiles/connection-profile-org1.yaml from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"name: fablo-test-network-org1
description: Connection profile for Org1 in Fablo network
version: 1.0.0
client:
  organization: Org1
organizations:
  Org1:
    mspid: Org1MSP
    peers:
      - peer0.org1.example.com
      - peer1.org1.example.com
    certificateAuthorities:
      - ca.org1.example.com
peers:
  peer0.org1.example.com:
    url: grpcs://localhost:7041
    tlsCACerts:
      path: >-
        <absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
    grpcOptions:
      ssl-target-name-override: peer0.org1.example.com
  peer1.org1.example.com:
    url: grpcs://localhost:7042
    tlsCACerts:
      path: >-
        <absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
    grpcOptions:
      ssl-target-name-override: peer1.org1.example.com
certificateAuthorities:
  ca.org1.example.com:
    url: https://localhost:7040
    caName: ca.org1.example.com
    tlsCACerts:
      path: >-
        <absolute path>/samples/fablo-target/fabric-config/crypto-config/peerOrganizations/org1.example.com/ca/ca.org1.example.com-cert.pem
    httpOptions:
      verify: false
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/crypto-config-orderer.yaml from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"PeerOrgs:
  - Name: Orderer
    Domain: orderer.example.com
    Specs:
      - Hostname: orderer0.group1
      - Hostname: orderer1.group1
      - Hostname: orderer2.group1
      - Hostname: orderer3.group1
    Template:
      Count: 0
    Users:
      Count: 1
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/crypto-config-org1.yaml from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"PeerOrgs:
  - Name: Org1
    Domain: org1.example.com
    Specs:
    Template:
      Count: 2
    Users:
      Count: 1
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/explorer/config-global.json from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"{
  "network-configs": {
    "network-org1": {
      "name": "Network of Org1",
      "profile": "/opt/explorer/app/platform/fabric/connection-profile/connection-profile-org1.json"
    }
  },
  "license": "Apache-2.0"
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/fabric-ca-server-config/orderer.example.com/fabric-ca-server-config.yaml from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#############################################################################
#   This is a configuration file for the fabric-ca-server command.
#
#   COMMAND LINE ARGUMENTS AND ENVIRONMENT VARIABLES
#   ------------------------------------------------
#   Each configuration element can be overridden via command line
#   arguments or environment variables.  The precedence for determining
#   the value of each element is as follows:
#   1) command line argument
#      Examples:
#      a) --port 443
#         To set the listening port
#      b) --ca.keyfile ../mykey.pem
#         To set the "keyfile" element in the "ca" section below;
#         note the '.' separator character.
#   2) environment variable
#      Examples:
#      a) FABRIC_CA_SERVER_PORT=443
#         To set the listening port
#      b) FABRIC_CA_SERVER_CA_KEYFILE="../mykey.pem"
#         To set the "keyfile" element in the "ca" section below;
#         note the '_' separator character.
#   3) configuration file
#   4) default value (if there is one)
#      All default values are shown beside each element below.
#
#   FILE NAME ELEMENTS
#   ------------------
#   The value of all fields whose name ends with "file" or "files" are
#   name or names of other files.
#   For example, see "tls.certfile" and "tls.clientauth.certfiles".
#   The value of each of these fields can be a simple filename, a
#   relative path, or an absolute path.  If the value is not an
#   absolute path, it is interpreted as being relative to the location
#   of this configuration file.
#
#############################################################################

# Version of config file
version: 1.5.5

# Server's listening port (default: 7054)
port: 7054

# Cross-Origin Resource Sharing (CORS)
cors:
  enabled: false
  origins:
    - "*"

# Enables debug logging (default: false)
debug: false

# Size limit of an acceptable CRL in bytes (default: 512000)
crlsizelimit: 512000

#############################################################################
#  TLS section for the server's listening port
#
#  The following types are supported for client authentication: NoClientCert,
#  RequestClientCert, RequireAnyClientCert, VerifyClientCertIfGiven,
#  and RequireAndVerifyClientCert.
#
#  Certfiles is a list of root certificate authorities that the server uses
#  when verifying client certificates.
#############################################################################
tls:
  # Enable TLS (default: false)
  enabled: false
  # TLS for the server's listening port
  certfile:
  keyfile:
  clientauth:
    type: noclientcert
    certfiles:

#############################################################################
#  The CA section contains information related to the Certificate Authority
#  including the name of the CA, which should be unique for all members
#  of a blockchain network.  It also includes the key and certificate files
#  used when issuing enrollment certificates (ECerts).
#  The chainfile (if it exists) contains the certificate chain which
#  should be trusted for this CA, where the 1st in the chain is always the
#  root CA certificate.
#############################################################################
ca:
  # Name of this CA
  name:
  # Key file (is only used to import a private key into BCCSP)
  keyfile:
  # Certificate file (default: ca-cert.pem)
  certfile:
  # Chain file
  chainfile:

#############################################################################
#  The gencrl REST endpoint is used to generate a CRL that contains revoked
#  certificates. This section contains configuration options that are used
#  during gencrl request processing.
#############################################################################
crl:
  # Specifies expiration for the generated CRL. The number of hours
  # specified by this property is added to the UTC time, the resulting time
  # is used to set the 'Next Update' date of the CRL.
  expiry: 24h

#############################################################################
#  The registry section controls how the fabric-ca-server does two things:
#  1) authenticates enrollment requests which contain a username and password
#     (also known as an enrollment ID and secret).
#  2) once authenticated, retrieves the identity's attribute names and values.
#     These attributes are useful for making access control decisions in
#     chaincode.
#  There are two main configuration options:
#  1) The fabric-ca-server is the registry.
#     This is true if "ldap.enabled" in the ldap section below is false.
#  2) An LDAP server is the registry, in which case the fabric-ca-server
#     calls the LDAP server to perform these tasks.
#     This is true if "ldap.enabled" in the ldap section below is true,
#     which means this "registry" section is ignored.
#############################################################################
registry:
  # Maximum number of times a password/secret can be reused for enrollment
  # (default: -1, which means there is no limit)
  maxenrollments: -1

  # Contains identity information which is used when LDAP is disabled
  identities:
    - name: admin
      pass: adminpw
      type: client
      affiliation: ""
      attrs:
        hf.Registrar.Roles: "*"
        hf.Registrar.DelegateRoles: "*"
        hf.Revoker: true
        hf.IntermediateCA: true
        hf.GenCRL: true
        hf.Registrar.Attributes: "*"
        hf.AffiliationMgr: true

#############################################################################
#  Database section
#  Supported types are: "sqlite3", "postgres", and "mysql".
#  The datasource value depends on the type.
#  If the type is "sqlite3", the datasource value is a file name to use
#  as the database store.  Since "sqlite3" is an embedded database, it
#  may not be used if you want to run the fabric-ca-server in a cluster.
#  To run the fabric-ca-server in a cluster, you must choose "postgres"
#  or "mysql".
#############################################################################
db:
  type: sqlite3
  datasource: fabric-ca-server.db
  tls:
    enabled: false
    certfiles:
    client:
      certfile:
      keyfile:

#############################################################################
#  LDAP section
#  If LDAP is enabled, the fabric-ca-server calls LDAP to:
#  1) authenticate enrollment ID and secret (i.e. username and password)
#     for enrollment requests;
#  2) To retrieve identity attributes
#############################################################################
ldap:
  # Enables or disables the LDAP client (default: false)
  # If this is set to true, the "registry" section is ignored.
  enabled: false
  # The URL of the LDAP server
  url: ldap://<adminDN>:<adminPassword>@<host>:<port>/<base>
  # TLS configuration for the client connection to the LDAP server
  tls:
    certfiles:
    client:
      certfile:
      keyfile:
  # Attribute related configuration for mapping from LDAP entries to Fabric CA attributes
  attribute:
    # 'names' is an array of strings containing the LDAP attribute names which are
    # requested from the LDAP server for an LDAP identity's entry
    names: ['uid', 'member']
    # The 'converters' section is used to convert an LDAP entry to the value of
    # a fabric CA attribute.
    # For example, the following converts an LDAP 'uid' attribute
    # whose value begins with 'revoker' to a fabric CA attribute
    # named "hf.Revoker" with a value of "true" (because the boolean expression
    # evaluates to true).
    #    converters:
    #       - name: hf.Revoker
    #         value: attr("uid") =~ "revoker*"
    converters:
      - name:
        value:
    # The 'maps' section contains named maps which may be referenced by the 'map'
    # function in the 'converters' section to map LDAP responses to arbitrary values.
    # For example, assume a user has an LDAP attribute named 'member' which has multiple
    # values which are each a distinguished name (i.e. a DN). For simplicity, assume the
    # values of the 'member' attribute are 'dn1', 'dn2', and 'dn3'.
    # Further assume the following configuration.
    #    converters:
    #       - name: hf.Registrar.Roles
    #         value: map(attr("member"),"groups")
    #    maps:
    #       groups:
    #          - name: dn1
    #            value: peer
    #          - name: dn2
    #            value: client
    # The value of the user's 'hf.Registrar.Roles' attribute is then computed to be
    # "peer,client,dn3".  This is because the value of 'attr("member")' is
    # "dn1,dn2,dn3", and the call to 'map' with a 2nd argument of
    # "group" replaces "dn1" with "peer" and "dn2" with "client".
    maps:
      groups:
        - name:
          value:

#############################################################################
# Affiliations section. Fabric CA server can be bootstrapped with the
# affiliations specified in this section. Affiliations are specified as maps.
# For example:
#   businessunit1:
#     department1:
#       - team1
#   businessunit2:
#     - department2
#     - department3
#
# Affiliations are hierarchical in nature. In the above example,
# department1 (used as businessunit1.department1) is the child of businessunit1.
# team1 (used as businessunit1.department1.team1) is the child of department1.
# department2 (used as businessunit2.department2) and department3 (businessunit2.department3)
# are children of businessunit2.
# Note: Affiliations are case sensitive except for the non-leaf affiliations
# (like businessunit1, department1, businessunit2) that are specified in the configuration file,
# which are always stored in lower case.
#############################################################################
affiliations:
  orderer:

#############################################################################
#  Signing section
#
#  The "default" subsection is used to sign enrollment certificates;
#  the default expiration ("expiry" field) is "8760h", which is 1 year in hours.
#
#  The "ca" profile subsection is used to sign intermediate CA certificates;
#  the default expiration ("expiry" field) is "43800h" which is 5 years in hours.
#  Note that "isca" is true, meaning that it issues a CA certificate.
#  A maxpathlen of 0 means that the intermediate CA cannot issue other
#  intermediate CA certificates, though it can still issue end entity certificates.
#  (See RFC 5280, section 4.2.1.9)
#
#  The "tls" profile subsection is used to sign TLS certificate requests;
#  the default expiration ("expiry" field) is "8760h", which is 1 year in hours.
#############################################################################
signing:
  default:
    usage:
      - digital signature
    expiry: 8760h
  profiles:
    ca:
      usage:
        - cert sign
        - crl sign
      expiry: 43800h
      caconstraint:
        isca: true
        maxpathlen: 0
    tls:
      usage:
        - signing
        - key encipherment
        - server auth
        - client auth
        - key agreement
      expiry: 8760h

###########################################################################
#  Certificate Signing Request (CSR) section.
#  This controls the creation of the root CA certificate.
#  The expiration for the root CA certificate is configured with the
#  "ca.expiry" field below, whose default value is "131400h" which is
#  15 years in hours.
#  The pathlength field is used to limit CA certificate hierarchy as described
#  in section 4.2.1.9 of RFC 5280.
#  Examples:
#  1) No pathlength value means no limit is requested.
#  2) pathlength == 1 means a limit of 1 is requested which is the default for
#     a root CA.  This means the root CA can issue intermediate CA certificates,
#     but these intermediate CAs may not in turn issue other CA certificates
#     though they can still issue end entity certificates.
#  3) pathlength == 0 means a limit of 0 is requested;
#     this is the default for an intermediate CA, which means it can not issue
#     CA certificates though it can still issue end entity certificates.
###########################################################################
csr:
  cn: fabric-ca-server
  keyrequest:
    algo: ecdsa
    size: 256
  names:
    - C: US
      ST: "North Carolina"
      L:
      O: Hyperledger
      OU: Fabric
  hosts:
    - 483cccf16a98
    - localhost
  ca:
    expiry: 131400h
    pathlength: 1

###########################################################################
# Each CA can issue both X509 enrollment certificate as well as Idemix
# Credential. This section specifies configuration for the issuer component
# that is responsible for issuing Idemix credentials.
###########################################################################
idemix:
  # Specifies pool size for revocation handles. A revocation handle is an unique identifier of an
  # Idemix credential. The issuer will create a pool revocation handles of this specified size. When
  # a credential is requested, issuer will get handle from the pool and assign it to the credential.
  # Issuer will repopulate the pool with new handles when the last handle in the pool is used.
  # A revocation handle and credential revocation information (CRI) are used to create non revocation proof
  # by the prover to prove to the verifier that her credential is not revoked.
  rhpoolsize: 1000

  # The Idemix credential issuance is a two step process. First step is to  get a nonce from the issuer
  # and second step is send credential request that is constructed using the nonce to the isuser to
  # request a credential. This configuration property specifies expiration for the nonces. By default is
  # nonces expire after 15 seconds. The value is expressed in the time.Duration format (see https://golang.org/pkg/time/#ParseDuration).
  nonceexpiration: 15s

  # Specifies interval at which expired nonces are removed from datastore. Default value is 15 minutes.
  #  The value is expressed in the time.Duration format (see https://golang.org/pkg/time/#ParseDuration)
  noncesweepinterval: 15m

#############################################################################
# BCCSP (BlockChain Crypto Service Provider) section is used to select which
# crypto library implementation to use
#############################################################################
bccsp:
  default: SW
  sw:
    hash: SHA2
    security: 256
    filekeystore:
      # The directory used for the software file-based keystore
      keystore: msp/keystore

#############################################################################
# Multi CA section
#
# Each Fabric CA server contains one CA by default.  This section is used
# to configure multiple CAs in a single server.
#
# 1) --cacount <number-of-CAs>
# Automatically generate <number-of-CAs> non-default CAs.  The names of these
# additional CAs are "ca1", "ca2", ... "caN", where "N" is <number-of-CAs>
# This is particularly useful in a development environment to quickly set up
# multiple CAs. Note that, this config option is not applicable to intermediate CA server
# i.e., Fabric CA server that is started with intermediate.parentserver.url config
# option (-u command line option)
#
# 2) --cafiles <CA-config-files>
# For each CA config file in the list, generate a separate signing CA.  Each CA
# config file in this list MAY contain all of the same elements as are found in
# the server config file except port, debug, and tls sections.
#
# Examples:
# fabric-ca-server start -b admin:adminpw --cacount 2
#
# fabric-ca-server start -b admin:adminpw --cafiles ca/ca1/fabric-ca-server-config.yaml
# --cafiles ca/ca2/fabric-ca-server-config.yaml
#
#############################################################################

cacount:

cafiles:

#############################################################################
# Intermediate CA section
#
# The relationship between servers and CAs is as follows:
#   1) A single server process may contain or function as one or more CAs.
#      This is configured by the "Multi CA section" above.
#   2) Each CA is either a root CA or an intermediate CA.
#   3) Each intermediate CA has a parent CA which is either a root CA or another intermediate CA.
#
# This section pertains to configuration of #2 and #3.
# If the "intermediate.parentserver.url" property is set,
# then this is an intermediate CA with the specified parent
# CA.
#
# parentserver section
#    url - The URL of the parent server
#    caname - Name of the CA to enroll within the server
#
# enrollment section used to enroll intermediate CA with parent CA
#    profile - Name of the signing profile to use in issuing the certificate
#    label - Label to use in HSM operations
#
# tls section for secure socket connection
#   certfiles - PEM-encoded list of trusted root certificate files
#   client:
#     certfile - PEM-encoded certificate file for when client authentication
#     is enabled on server
#     keyfile - PEM-encoded key file for when client authentication
#     is enabled on server
#############################################################################
intermediate:
  parentserver:
    url:
    caname:

  enrollment:
    hosts:
    profile:
    label:

  tls:
    certfiles:
    client:
      certfile:
      keyfile:

#############################################################################
# CA configuration section
#
# Configure the number of incorrect password attempts are allowed for
# identities. By default, the value of 'passwordattempts' is 10, which
# means that 10 incorrect password attempts can be made before an identity get
# locked out.
#############################################################################
cfg:
  identities:
    passwordattempts: 10

###############################################################################
#
#    Operations section
#
###############################################################################
operations:
  # host and port for the operations server
  listenAddress: 127.0.0.1:9443

  # TLS configuration for the operations endpoint
  tls:
    # TLS enabled
    enabled: false

    # path to PEM encoded server certificate for the operations server
    cert:
      file:

    # path to PEM encoded server key for the operations server
    key:
      file:

    # require client certificate authentication to access all resources
    clientAuthRequired: false

    # paths to PEM encoded ca certificates to trust for client authentication
    clientRootCAs:
      files: []

###############################################################################
#
#    Metrics section
#
###############################################################################
metrics:
  # statsd, prometheus, or disabled
  provider: disabled

  # statsd configuration
  statsd:
    # network type: tcp or udp
    network: udp

    # statsd server address
    address: 127.0.0.1:8125

    # the interval at which locally cached counters and gauges are pushed
    # to statsd; timings are pushed immediately
    writeInterval: 10s

    # prefix is prepended to all emitted statsd metrics
    prefix: server
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/fabric-ca-server-config/org1.example.com/fabric-ca-server-config.yaml from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#############################################################################
#   This is a configuration file for the fabric-ca-server command.
#
#   COMMAND LINE ARGUMENTS AND ENVIRONMENT VARIABLES
#   ------------------------------------------------
#   Each configuration element can be overridden via command line
#   arguments or environment variables.  The precedence for determining
#   the value of each element is as follows:
#   1) command line argument
#      Examples:
#      a) --port 443
#         To set the listening port
#      b) --ca.keyfile ../mykey.pem
#         To set the "keyfile" element in the "ca" section below;
#         note the '.' separator character.
#   2) environment variable
#      Examples:
#      a) FABRIC_CA_SERVER_PORT=443
#         To set the listening port
#      b) FABRIC_CA_SERVER_CA_KEYFILE="../mykey.pem"
#         To set the "keyfile" element in the "ca" section below;
#         note the '_' separator character.
#   3) configuration file
#   4) default value (if there is one)
#      All default values are shown beside each element below.
#
#   FILE NAME ELEMENTS
#   ------------------
#   The value of all fields whose name ends with "file" or "files" are
#   name or names of other files.
#   For example, see "tls.certfile" and "tls.clientauth.certfiles".
#   The value of each of these fields can be a simple filename, a
#   relative path, or an absolute path.  If the value is not an
#   absolute path, it is interpreted as being relative to the location
#   of this configuration file.
#
#############################################################################

# Version of config file
version: 1.5.5

# Server's listening port (default: 7054)
port: 7054

# Cross-Origin Resource Sharing (CORS)
cors:
  enabled: false
  origins:
    - "*"

# Enables debug logging (default: false)
debug: false

# Size limit of an acceptable CRL in bytes (default: 512000)
crlsizelimit: 512000

#############################################################################
#  TLS section for the server's listening port
#
#  The following types are supported for client authentication: NoClientCert,
#  RequestClientCert, RequireAnyClientCert, VerifyClientCertIfGiven,
#  and RequireAndVerifyClientCert.
#
#  Certfiles is a list of root certificate authorities that the server uses
#  when verifying client certificates.
#############################################################################
tls:
  # Enable TLS (default: false)
  enabled: false
  # TLS for the server's listening port
  certfile:
  keyfile:
  clientauth:
    type: noclientcert
    certfiles:

#############################################################################
#  The CA section contains information related to the Certificate Authority
#  including the name of the CA, which should be unique for all members
#  of a blockchain network.  It also includes the key and certificate files
#  used when issuing enrollment certificates (ECerts).
#  The chainfile (if it exists) contains the certificate chain which
#  should be trusted for this CA, where the 1st in the chain is always the
#  root CA certificate.
#############################################################################
ca:
  # Name of this CA
  name:
  # Key file (is only used to import a private key into BCCSP)
  keyfile:
  # Certificate file (default: ca-cert.pem)
  certfile:
  # Chain file
  chainfile:

#############################################################################
#  The gencrl REST endpoint is used to generate a CRL that contains revoked
#  certificates. This section contains configuration options that are used
#  during gencrl request processing.
#############################################################################
crl:
  # Specifies expiration for the generated CRL. The number of hours
  # specified by this property is added to the UTC time, the resulting time
  # is used to set the 'Next Update' date of the CRL.
  expiry: 24h

#############################################################################
#  The registry section controls how the fabric-ca-server does two things:
#  1) authenticates enrollment requests which contain a username and password
#     (also known as an enrollment ID and secret).
#  2) once authenticated, retrieves the identity's attribute names and values.
#     These attributes are useful for making access control decisions in
#     chaincode.
#  There are two main configuration options:
#  1) The fabric-ca-server is the registry.
#     This is true if "ldap.enabled" in the ldap section below is false.
#  2) An LDAP server is the registry, in which case the fabric-ca-server
#     calls the LDAP server to perform these tasks.
#     This is true if "ldap.enabled" in the ldap section below is true,
#     which means this "registry" section is ignored.
#############################################################################
registry:
  # Maximum number of times a password/secret can be reused for enrollment
  # (default: -1, which means there is no limit)
  maxenrollments: -1

  # Contains identity information which is used when LDAP is disabled
  identities:
    - name: admin
      pass: adminpw
      type: client
      affiliation: ""
      attrs:
        hf.Registrar.Roles: "*"
        hf.Registrar.DelegateRoles: "*"
        hf.Revoker: true
        hf.IntermediateCA: true
        hf.GenCRL: true
        hf.Registrar.Attributes: "*"
        hf.AffiliationMgr: true

#############################################################################
#  Database section
#  Supported types are: "sqlite3", "postgres", and "mysql".
#  The datasource value depends on the type.
#  If the type is "sqlite3", the datasource value is a file name to use
#  as the database store.  Since "sqlite3" is an embedded database, it
#  may not be used if you want to run the fabric-ca-server in a cluster.
#  To run the fabric-ca-server in a cluster, you must choose "postgres"
#  or "mysql".
#############################################################################
db:
  type: sqlite3
  datasource: fabric-ca-server.db
  tls:
    enabled: false
    certfiles:
    client:
      certfile:
      keyfile:

#############################################################################
#  LDAP section
#  If LDAP is enabled, the fabric-ca-server calls LDAP to:
#  1) authenticate enrollment ID and secret (i.e. username and password)
#     for enrollment requests;
#  2) To retrieve identity attributes
#############################################################################
ldap:
  # Enables or disables the LDAP client (default: false)
  # If this is set to true, the "registry" section is ignored.
  enabled: false
  # The URL of the LDAP server
  url: ldap://<adminDN>:<adminPassword>@<host>:<port>/<base>
  # TLS configuration for the client connection to the LDAP server
  tls:
    certfiles:
    client:
      certfile:
      keyfile:
  # Attribute related configuration for mapping from LDAP entries to Fabric CA attributes
  attribute:
    # 'names' is an array of strings containing the LDAP attribute names which are
    # requested from the LDAP server for an LDAP identity's entry
    names: ['uid', 'member']
    # The 'converters' section is used to convert an LDAP entry to the value of
    # a fabric CA attribute.
    # For example, the following converts an LDAP 'uid' attribute
    # whose value begins with 'revoker' to a fabric CA attribute
    # named "hf.Revoker" with a value of "true" (because the boolean expression
    # evaluates to true).
    #    converters:
    #       - name: hf.Revoker
    #         value: attr("uid") =~ "revoker*"
    converters:
      - name:
        value:
    # The 'maps' section contains named maps which may be referenced by the 'map'
    # function in the 'converters' section to map LDAP responses to arbitrary values.
    # For example, assume a user has an LDAP attribute named 'member' which has multiple
    # values which are each a distinguished name (i.e. a DN). For simplicity, assume the
    # values of the 'member' attribute are 'dn1', 'dn2', and 'dn3'.
    # Further assume the following configuration.
    #    converters:
    #       - name: hf.Registrar.Roles
    #         value: map(attr("member"),"groups")
    #    maps:
    #       groups:
    #          - name: dn1
    #            value: peer
    #          - name: dn2
    #            value: client
    # The value of the user's 'hf.Registrar.Roles' attribute is then computed to be
    # "peer,client,dn3".  This is because the value of 'attr("member")' is
    # "dn1,dn2,dn3", and the call to 'map' with a 2nd argument of
    # "group" replaces "dn1" with "peer" and "dn2" with "client".
    maps:
      groups:
        - name:
          value:

#############################################################################
# Affiliations section. Fabric CA server can be bootstrapped with the
# affiliations specified in this section. Affiliations are specified as maps.
# For example:
#   businessunit1:
#     department1:
#       - team1
#   businessunit2:
#     - department2
#     - department3
#
# Affiliations are hierarchical in nature. In the above example,
# department1 (used as businessunit1.department1) is the child of businessunit1.
# team1 (used as businessunit1.department1.team1) is the child of department1.
# department2 (used as businessunit2.department2) and department3 (businessunit2.department3)
# are children of businessunit2.
# Note: Affiliations are case sensitive except for the non-leaf affiliations
# (like businessunit1, department1, businessunit2) that are specified in the configuration file,
# which are always stored in lower case.
#############################################################################
affiliations:
  org1:

#############################################################################
#  Signing section
#
#  The "default" subsection is used to sign enrollment certificates;
#  the default expiration ("expiry" field) is "8760h", which is 1 year in hours.
#
#  The "ca" profile subsection is used to sign intermediate CA certificates;
#  the default expiration ("expiry" field) is "43800h" which is 5 years in hours.
#  Note that "isca" is true, meaning that it issues a CA certificate.
#  A maxpathlen of 0 means that the intermediate CA cannot issue other
#  intermediate CA certificates, though it can still issue end entity certificates.
#  (See RFC 5280, section 4.2.1.9)
#
#  The "tls" profile subsection is used to sign TLS certificate requests;
#  the default expiration ("expiry" field) is "8760h", which is 1 year in hours.
#############################################################################
signing:
  default:
    usage:
      - digital signature
    expiry: 8760h
  profiles:
    ca:
      usage:
        - cert sign
        - crl sign
      expiry: 43800h
      caconstraint:
        isca: true
        maxpathlen: 0
    tls:
      usage:
        - signing
        - key encipherment
        - server auth
        - client auth
        - key agreement
      expiry: 8760h

###########################################################################
#  Certificate Signing Request (CSR) section.
#  This controls the creation of the root CA certificate.
#  The expiration for the root CA certificate is configured with the
#  "ca.expiry" field below, whose default value is "131400h" which is
#  15 years in hours.
#  The pathlength field is used to limit CA certificate hierarchy as described
#  in section 4.2.1.9 of RFC 5280.
#  Examples:
#  1) No pathlength value means no limit is requested.
#  2) pathlength == 1 means a limit of 1 is requested which is the default for
#     a root CA.  This means the root CA can issue intermediate CA certificates,
#     but these intermediate CAs may not in turn issue other CA certificates
#     though they can still issue end entity certificates.
#  3) pathlength == 0 means a limit of 0 is requested;
#     this is the default for an intermediate CA, which means it can not issue
#     CA certificates though it can still issue end entity certificates.
###########################################################################
csr:
  cn: fabric-ca-server
  keyrequest:
    algo: ecdsa
    size: 256
  names:
    - C: US
      ST: "North Carolina"
      L:
      O: Hyperledger
      OU: Fabric
  hosts:
    - 483cccf16a98
    - localhost
  ca:
    expiry: 131400h
    pathlength: 1

###########################################################################
# Each CA can issue both X509 enrollment certificate as well as Idemix
# Credential. This section specifies configuration for the issuer component
# that is responsible for issuing Idemix credentials.
###########################################################################
idemix:
  # Specifies pool size for revocation handles. A revocation handle is an unique identifier of an
  # Idemix credential. The issuer will create a pool revocation handles of this specified size. When
  # a credential is requested, issuer will get handle from the pool and assign it to the credential.
  # Issuer will repopulate the pool with new handles when the last handle in the pool is used.
  # A revocation handle and credential revocation information (CRI) are used to create non revocation proof
  # by the prover to prove to the verifier that her credential is not revoked.
  rhpoolsize: 1000

  # The Idemix credential issuance is a two step process. First step is to  get a nonce from the issuer
  # and second step is send credential request that is constructed using the nonce to the isuser to
  # request a credential. This configuration property specifies expiration for the nonces. By default is
  # nonces expire after 15 seconds. The value is expressed in the time.Duration format (see https://golang.org/pkg/time/#ParseDuration).
  nonceexpiration: 15s

  # Specifies interval at which expired nonces are removed from datastore. Default value is 15 minutes.
  #  The value is expressed in the time.Duration format (see https://golang.org/pkg/time/#ParseDuration)
  noncesweepinterval: 15m

#############################################################################
# BCCSP (BlockChain Crypto Service Provider) section is used to select which
# crypto library implementation to use
#############################################################################
bccsp:
  default: SW
  sw:
    hash: SHA2
    security: 256
    filekeystore:
      # The directory used for the software file-based keystore
      keystore: msp/keystore

#############################################################################
# Multi CA section
#
# Each Fabric CA server contains one CA by default.  This section is used
# to configure multiple CAs in a single server.
#
# 1) --cacount <number-of-CAs>
# Automatically generate <number-of-CAs> non-default CAs.  The names of these
# additional CAs are "ca1", "ca2", ... "caN", where "N" is <number-of-CAs>
# This is particularly useful in a development environment to quickly set up
# multiple CAs. Note that, this config option is not applicable to intermediate CA server
# i.e., Fabric CA server that is started with intermediate.parentserver.url config
# option (-u command line option)
#
# 2) --cafiles <CA-config-files>
# For each CA config file in the list, generate a separate signing CA.  Each CA
# config file in this list MAY contain all of the same elements as are found in
# the server config file except port, debug, and tls sections.
#
# Examples:
# fabric-ca-server start -b admin:adminpw --cacount 2
#
# fabric-ca-server start -b admin:adminpw --cafiles ca/ca1/fabric-ca-server-config.yaml
# --cafiles ca/ca2/fabric-ca-server-config.yaml
#
#############################################################################

cacount:

cafiles:

#############################################################################
# Intermediate CA section
#
# The relationship between servers and CAs is as follows:
#   1) A single server process may contain or function as one or more CAs.
#      This is configured by the "Multi CA section" above.
#   2) Each CA is either a root CA or an intermediate CA.
#   3) Each intermediate CA has a parent CA which is either a root CA or another intermediate CA.
#
# This section pertains to configuration of #2 and #3.
# If the "intermediate.parentserver.url" property is set,
# then this is an intermediate CA with the specified parent
# CA.
#
# parentserver section
#    url - The URL of the parent server
#    caname - Name of the CA to enroll within the server
#
# enrollment section used to enroll intermediate CA with parent CA
#    profile - Name of the signing profile to use in issuing the certificate
#    label - Label to use in HSM operations
#
# tls section for secure socket connection
#   certfiles - PEM-encoded list of trusted root certificate files
#   client:
#     certfile - PEM-encoded certificate file for when client authentication
#     is enabled on server
#     keyfile - PEM-encoded key file for when client authentication
#     is enabled on server
#############################################################################
intermediate:
  parentserver:
    url:
    caname:

  enrollment:
    hosts:
    profile:
    label:

  tls:
    certfiles:
    client:
      certfile:
      keyfile:

#############################################################################
# CA configuration section
#
# Configure the number of incorrect password attempts are allowed for
# identities. By default, the value of 'passwordattempts' is 10, which
# means that 10 incorrect password attempts can be made before an identity get
# locked out.
#############################################################################
cfg:
  identities:
    passwordattempts: 10

###############################################################################
#
#    Operations section
#
###############################################################################
operations:
  # host and port for the operations server
  listenAddress: 127.0.0.1:9443

  # TLS configuration for the operations endpoint
  tls:
    # TLS enabled
    enabled: false

    # path to PEM encoded server certificate for the operations server
    cert:
      file:

    # path to PEM encoded server key for the operations server
    key:
      file:

    # require client certificate authentication to access all resources
    clientAuthRequired: false

    # paths to PEM encoded ca certificates to trust for client authentication
    clientRootCAs:
      files: []

###############################################################################
#
#    Metrics section
#
###############################################################################
metrics:
  # statsd, prometheus, or disabled
  provider: disabled

  # statsd configuration
  statsd:
    # network type: tcp or udp
    network: udp

    # statsd server address
    address: 127.0.0.1:8125

    # the interval at which locally cached counters and gauges are pushed
    # to statsd; timings are pushed immediately
    writeInterval: 10s

    # prefix is prepended to all emitted statsd metrics
    prefix: server
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

set -eu

FABLO_NETWORK_ROOT="$(cd "$(dirname "$0")" && pwd)"

source "$FABLO_NETWORK_ROOT/fabric-docker/scripts/base-help.sh"
source "$FABLO_NETWORK_ROOT/fabric-docker/scripts/base-functions.sh"
source "$FABLO_NETWORK_ROOT/fabric-docker/scripts/chaincode-functions.sh"
source "$FABLO_NETWORK_ROOT/fabric-docker/channel-query-scripts.sh"
source "$FABLO_NETWORK_ROOT/fabric-docker/snapshot-scripts.sh"
source "$FABLO_NETWORK_ROOT/fabric-docker/commands-generated.sh"
source "$FABLO_NETWORK_ROOT/fabric-docker/.env"
source "$FABLO_NETWORK_ROOT/fabric-docker/chaincode-scripts.sh"

networkUp() {
  generateArtifacts
  startNetwork
  generateChannelsArtifacts
  installChannels
  installChaincodes
  notifyOrgsAboutChannels
  printStartSuccessInfo
}

if [ "$1" = "up" ]; then
  networkUp
elif [ "$1" = "down" ]; then
  networkDown
elif [ "$1" = "reset" ]; then
  networkDown
  networkUp
elif [ "$1" = "start" ]; then
  startNetwork
elif [ "$1" = "stop" ]; then
  stopNetwork
elif [ "$1" = "chaincodes" ] && [ "$2" = "install" ]; then
  installChaincodes
elif [ "$1" = "chaincode" ] && [ "$2" = "install" ]; then
  installChaincode "$3" "$4"
elif [ "$1" = "chaincode" ] && [ "$2" = "upgrade" ]; then
  upgradeChaincode "$3" "$4"
elif [ "$1" = "chaincode" ] && [ "$2" = "dev" ]; then
  runDevModeChaincode "$3" "$4"
elif [ "$1" = "chaincode" ] && [ "$2" = "invoke" ]; then
  chaincodeInvoke "$3" "$4" "$5" "$6" "$7"
elif [ "$1" = "chaincodes" ] && [ "$2" = "list" ]; then
  chaincodeList "$3" "$4"
elif [ "$1" = "channel" ]; then
  channelQuery "\${@:2}"
elif [ "$1" = "snapshot" ]; then
  createSnapshot "$2"
elif [ "$1" = "clone-to" ]; then
  cloneSnapshot "$2" "\${3:-""}"
elif [ "$1" = "help" ]; then
  printHelp
elif [ "$1" = "--help" ]; then
  printHelp
else
  echo "No command specified"
  echo "Basic commands are: up, down, start, stop, reset"
  echo "To list channel query helper commands type: 'fablo channel --help'"
  echo "Also check: 'chaincode install'"
  echo "Use 'help' or '--help' for more information"
fi
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/.env from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"FABLO_VERSION=2.2.0
FABLO_BUILD=<date with git hash>
FABLO_REST_VERSION=0.1.2
HYPERLEDGER_EXPLORER_VERSION=1.1.8

COUCHDB_VERSION=3.1
FABRIC_COUCHDB_VERSION=0.4.18

FABLO_CONFIG=<absolute path>
CHAINCODES_BASE_DIR=<absolute path>

COMPOSE_PROJECT_NAME=<name with timestamp>
LOGGING_LEVEL=debug

FABRIC_VERSION=3.0.0-beta
FABRIC_TOOLS_VERSION=3.0.0
FABRIC_CA_VERSION=1.5.5
FABRIC_CA_POSTGRES_VERSION=14
FABRIC_CCENV_VERSION=3.0.0-beta
FABRIC_BASEOS_VERSION=3.0.0-beta
FABRIC_JAVAENV_VERSION=2.5
FABRIC_NODEENV_VERSION=2.5
RECOMMENDED_NODE_VERSION=16

ROOT_CA_ADMIN_NAME=admin
ROOT_CA_ADMIN_PASSWORD=adminpw

ORDERER_CA_ADMIN_NAME=admin
ORDERER_CA_ADMIN_PASSWORD=adminpw

ORG1_CA_ADMIN_NAME=admin
ORG1_CA_ADMIN_PASSWORD=adminpw

"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/chaincode-scripts.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

chaincodeList() {
  if [ "$#" -ne 2 ]; then
    echo "Expected 2 parameters for chaincode list, but got: $*"
    exit 1

  elif [ "$1" = "peer0.org1.example.com" ]; then

    peerChaincodeListTls "cli.org1.example.com" "peer0.org1.example.com:7041" "$2" "crypto-orderer/tlsca.orderer.example.com-cert.pem" # Third argument is channel name

  elif
    [ "$1" = "peer1.org1.example.com" ]
  then

    peerChaincodeListTls "cli.org1.example.com" "peer1.org1.example.com:7042" "$2" "crypto-orderer/tlsca.orderer.example.com-cert.pem" # Third argument is channel name

  else

    echo "Fail to call listChaincodes. No peer or channel found. Provided peer: $1, channel: $2"
    exit 1

  fi
}

# Function to perform chaincode invoke. Accepts 5 parameters:
#   1. comma-separated peers
#   2. channel name
#   3. chaincode name
#   4. chaincode command
#   5. transient data (optional)
chaincodeInvoke() {
  if [ "$#" -ne 4 ] && [ "$#" -ne 5 ]; then
    echo "Expected 4 or 5 parameters for chaincode list, but got: $*"
    echo "Usage: fablo chaincode invoke <peer_domains_comma_separated> <channel_name> <chaincode_name> <command> [transient]"
    exit 1
  fi
  cli=""
  peer_addresses=""

  peer_certs=""

  if [[ "$1" == *"peer0.org1.example.com"* ]]; then
    cli="cli.org1.example.com"
    peer_addresses="$peer_addresses,peer0.org1.example.com:7041"

    peer_certs="$peer_certs,crypto/peers/peer0.org1.example.com/tls/ca.crt"

  fi
  if [[ "$1" == *"peer1.org1.example.com"* ]]; then
    cli="cli.org1.example.com"
    peer_addresses="$peer_addresses,peer1.org1.example.com:7042"

    peer_certs="$peer_certs,crypto/peers/peer1.org1.example.com/tls/ca.crt"

  fi
  if [ -z "$peer_addresses" ]; then
    echo "Unknown peers: $1"
    exit 1
  fi

  if [ "$2" = "my-channel1" ]; then
    ca_cert="crypto-orderer/tlsca.orderer.example.com-cert.pem"
  fi

  peerChaincodeInvokeTls "$cli" "\${peer_addresses:1}" "$2" "$3" "$4" "$5" "\${peer_certs:1}" "$ca_cert"

}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/channel-query-scripts.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

source "$FABLO_NETWORK_ROOT/fabric-docker/scripts/channel-query-functions.sh"

set -eu

channelQuery() {
  echo "-> Channel query: " + "$@"

  if [ "$#" -eq 1 ]; then
    printChannelsHelp

  elif [ "$1" = "list" ] && [ "$2" = "org1" ] && [ "$3" = "peer0" ]; then

    peerChannelListTls "cli.org1.example.com" "peer0.org1.example.com:7041" "crypto-orderer/tlsca.orderer.example.com-cert.pem"

  elif
    [ "$1" = "list" ] && [ "$2" = "org1" ] && [ "$3" = "peer1" ]
  then

    peerChannelListTls "cli.org1.example.com" "peer1.org1.example.com:7042" "crypto-orderer/tlsca.orderer.example.com-cert.pem"

  elif

    [ "$1" = "getinfo" ] && [ "$2" = "my-channel1" ] && [ "$3" = "org1" ] && [ "$4" = "peer0" ]
  then

    peerChannelGetInfoTls "my-channel1" "cli.org1.example.com" "peer0.org1.example.com:7041" "crypto-orderer/tlsca.orderer.example.com-cert.pem"

  elif [ "$1" = "fetch" ] && [ "$2" = "config" ] && [ "$3" = "my-channel1" ] && [ "$4" = "org1" ] && [ "$5" = "peer0" ]; then
    TARGET_FILE=\${6:-"$channel-config.json"}

    peerChannelFetchConfigTls "my-channel1" "cli.org1.example.com" "$TARGET_FILE" "peer0.org1.example.com:7041" "crypto-orderer/tlsca.orderer.example.com-cert.pem"

  elif [ "$1" = "fetch" ] && [ "$3" = "my-channel1" ] && [ "$4" = "org1" ] && [ "$5" = "peer0" ]; then
    BLOCK_NAME=$2
    TARGET_FILE=\${6:-"$BLOCK_NAME.block"}

    peerChannelFetchBlockTls "my-channel1" "cli.org1.example.com" "\${BLOCK_NAME}" "peer0.org1.example.com:7041" "crypto-orderer/tlsca.orderer.example.com-cert.pem" "$TARGET_FILE"

  elif
    [ "$1" = "getinfo" ] && [ "$2" = "my-channel1" ] && [ "$3" = "org1" ] && [ "$4" = "peer1" ]
  then

    peerChannelGetInfoTls "my-channel1" "cli.org1.example.com" "peer1.org1.example.com:7042" "crypto-orderer/tlsca.orderer.example.com-cert.pem"

  elif [ "$1" = "fetch" ] && [ "$2" = "config" ] && [ "$3" = "my-channel1" ] && [ "$4" = "org1" ] && [ "$5" = "peer1" ]; then
    TARGET_FILE=\${6:-"$channel-config.json"}

    peerChannelFetchConfigTls "my-channel1" "cli.org1.example.com" "$TARGET_FILE" "peer1.org1.example.com:7042" "crypto-orderer/tlsca.orderer.example.com-cert.pem"

  elif [ "$1" = "fetch" ] && [ "$3" = "my-channel1" ] && [ "$4" = "org1" ] && [ "$5" = "peer1" ]; then
    BLOCK_NAME=$2
    TARGET_FILE=\${6:-"$BLOCK_NAME.block"}

    peerChannelFetchBlockTls "my-channel1" "cli.org1.example.com" "\${BLOCK_NAME}" "peer1.org1.example.com:7042" "crypto-orderer/tlsca.orderer.example.com-cert.pem" "$TARGET_FILE"

  else

    echo "$@"
    echo "$1, $2, $3, $4, $5, $6, $7, $#"
    printChannelsHelp
  fi

}

printChannelsHelp() {
  echo "Channel management commands:"
  echo ""

  echo "fablo channel list org1 peer0"
  echo -e "\\t List channels on 'peer0' of 'Org1'".
  echo ""

  echo "fablo channel list org1 peer1"
  echo -e "\\t List channels on 'peer1' of 'Org1'".
  echo ""

  echo "fablo channel getinfo my-channel1 org1 peer0"
  echo -e "\\t Get channel info on 'peer0' of 'Org1'".
  echo ""
  echo "fablo channel fetch config my-channel1 org1 peer0 [file-name.json]"
  echo -e "\\t Download latest config block and save it. Uses first peer 'peer0' of 'Org1'".
  echo ""
  echo "fablo channel fetch <newest|oldest|block-number> my-channel1 org1 peer0 [file name]"
  echo -e "\\t Fetch a block with given number and save it. Uses first peer 'peer0' of 'Org1'".
  echo ""

  echo "fablo channel getinfo my-channel1 org1 peer1"
  echo -e "\\t Get channel info on 'peer1' of 'Org1'".
  echo ""
  echo "fablo channel fetch config my-channel1 org1 peer1 [file-name.json]"
  echo -e "\\t Download latest config block and save it. Uses first peer 'peer1' of 'Org1'".
  echo ""
  echo "fablo channel fetch <newest|oldest|block-number> my-channel1 org1 peer1 [file name]"
  echo -e "\\t Fetch a block with given number and save it. Uses first peer 'peer1' of 'Org1'".
  echo ""

}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/commands-generated.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

generateArtifacts() {
  printHeadline "Generating basic configs" "U1F913"

  printItalics "Generating crypto material for Orderer" "U1F512"
  certsGenerate "$FABLO_NETWORK_ROOT/fabric-config" "crypto-config-orderer.yaml" "peerOrganizations/orderer.example.com" "$FABLO_NETWORK_ROOT/fabric-config/crypto-config/"

  printItalics "Generating crypto material for Org1" "U1F512"
  certsGenerate "$FABLO_NETWORK_ROOT/fabric-config" "crypto-config-org1.yaml" "peerOrganizations/org1.example.com" "$FABLO_NETWORK_ROOT/fabric-config/crypto-config/"

  # Create directories to avoid permission errors on linux
  mkdir -p "$FABLO_NETWORK_ROOT/fabric-config/chaincode-packages"
  mkdir -p "$FABLO_NETWORK_ROOT/fabric-config/config"
}

startNetwork() {
  printHeadline "Starting network" "U1F680"
  (cd "$FABLO_NETWORK_ROOT"/fabric-docker && docker compose up -d)
  sleep 4
}

generateChannelsArtifacts() {
  printHeadline "Generating config for 'my-channel1'" "U1F913"
  createChannelTx "my-channel1" "$FABLO_NETWORK_ROOT/fabric-config" "MyChannel1" "$FABLO_NETWORK_ROOT/fabric-config/config"
}

installChannels() {
  docker exec -i cli.orderer.example.com bash -c "source scripts/channel_fns.sh; createChannelAndJoinTls 'my-channel1' 'OrdererMSP' 'orderer0.group1.orderer.example.com:7053' 'crypto/users/Admin@orderer.example.com/tls/client.crt' 'crypto/users/Admin@orderer.example.com/tls/client.key' 'crypto-orderer/tlsca.orderer.example.com-cert.pem';"
  docker exec -i cli.orderer.example.com bash -c "source scripts/channel_fns.sh; createChannelAndJoinTls 'my-channel1' 'OrdererMSP' 'orderer1.group1.orderer.example.com:7053' 'crypto/users/Admin@orderer.example.com/tls/client.crt' 'crypto/users/Admin@orderer.example.com/tls/client.key' 'crypto-orderer/tlsca.orderer.example.com-cert.pem';"
  docker exec -i cli.orderer.example.com bash -c "source scripts/channel_fns.sh; createChannelAndJoinTls 'my-channel1' 'OrdererMSP' 'orderer2.group1.orderer.example.com:7053' 'crypto/users/Admin@orderer.example.com/tls/client.crt' 'crypto/users/Admin@orderer.example.com/tls/client.key' 'crypto-orderer/tlsca.orderer.example.com-cert.pem';"
  docker exec -i cli.orderer.example.com bash -c "source scripts/channel_fns.sh; createChannelAndJoinTls 'my-channel1' 'OrdererMSP' 'orderer3.group1.orderer.example.com:7053' 'crypto/users/Admin@orderer.example.com/tls/client.crt' 'crypto/users/Admin@orderer.example.com/tls/client.key' 'crypto-orderer/tlsca.orderer.example.com-cert.pem';"
  printHeadline "Creating 'my-channel1' on Org1/peer0" "U1F63B"
  docker exec -i cli.org1.example.com bash -c "source scripts/channel_fns.sh; fetchChannelAndJoinTls 'my-channel1' 'Org1MSP' 'peer0.org1.example.com:7041' 'crypto/users/Admin@org1.example.com/msp' 'crypto/users/Admin@org1.example.com/tls' 'crypto-orderer/tlsca.orderer.example.com-cert.pem' 'orderer0.group1.orderer.example.com:7030';"

  printItalics "Joining 'my-channel1' on Org1/peer1" "U1F638"
  docker exec -i cli.org1.example.com bash -c "source scripts/channel_fns.sh; fetchChannelAndJoinTls 'my-channel1' 'Org1MSP' 'peer1.org1.example.com:7042' 'crypto/users/Admin@org1.example.com/msp' 'crypto/users/Admin@org1.example.com/tls' 'crypto-orderer/tlsca.orderer.example.com-cert.pem' 'orderer0.group1.orderer.example.com:7030';"
}

installChaincodes() {
  if [ -n "$(ls "$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node")" ]; then
    local version="0.0.1"
    printHeadline "Packaging chaincode 'chaincode1'" "U1F60E"
    chaincodeBuild "chaincode1" "node" "$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node" "16"
    chaincodePackage "cli.org1.example.com" "peer0.org1.example.com:7041" "chaincode1" "$version" "node" printHeadline "Installing 'chaincode1' for Org1" "U1F60E"
    chaincodeInstall "cli.org1.example.com" "peer0.org1.example.com:7041" "chaincode1" "$version" "crypto-orderer/tlsca.orderer.example.com-cert.pem"
    chaincodeInstall "cli.org1.example.com" "peer1.org1.example.com:7042" "chaincode1" "$version" "crypto-orderer/tlsca.orderer.example.com-cert.pem"
    chaincodeApprove "cli.org1.example.com" "peer0.org1.example.com:7041" "my-channel1" "chaincode1" "$version" "orderer0.group1.orderer.example.com:7030" "AND ('Org1MSP.member')" "undefined" "crypto-orderer/tlsca.orderer.example.com-cert.pem" ""
    printItalics "Committing chaincode 'chaincode1' on channel 'my-channel1' as 'Org1'" "U1F618"
    chaincodeCommit "cli.org1.example.com" "peer0.org1.example.com:7041" "my-channel1" "chaincode1" "$version" "orderer0.group1.orderer.example.com:7030" "AND ('Org1MSP.member')" "undefined" "crypto-orderer/tlsca.orderer.example.com-cert.pem" "peer0.org1.example.com:7041" "crypto-peer/peer0.org1.example.com/tls/ca.crt" ""
  else
    echo "Warning! Skipping chaincode 'chaincode1' installation. Chaincode directory is empty."
    echo "Looked in dir: '$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node'"
  fi

}

installChaincode() {
  local chaincodeName="$1"
  if [ -z "$chaincodeName" ]; then
    echo "Error: chaincode name is not provided"
    exit 1
  fi

  local version="$2"
  if [ -z "$version" ]; then
    echo "Error: chaincode version is not provided"
    exit 1
  fi

  if [ "$chaincodeName" = "chaincode1" ]; then
    if [ -n "$(ls "$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node")" ]; then
      printHeadline "Packaging chaincode 'chaincode1'" "U1F60E"
      chaincodeBuild "chaincode1" "node" "$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node" "16"
      chaincodePackage "cli.org1.example.com" "peer0.org1.example.com:7041" "chaincode1" "$version" "node" printHeadline "Installing 'chaincode1' for Org1" "U1F60E"
      chaincodeInstall "cli.org1.example.com" "peer0.org1.example.com:7041" "chaincode1" "$version" "crypto-orderer/tlsca.orderer.example.com-cert.pem"
      chaincodeInstall "cli.org1.example.com" "peer1.org1.example.com:7042" "chaincode1" "$version" "crypto-orderer/tlsca.orderer.example.com-cert.pem"
      chaincodeApprove "cli.org1.example.com" "peer0.org1.example.com:7041" "my-channel1" "chaincode1" "$version" "orderer0.group1.orderer.example.com:7030" "AND ('Org1MSP.member')" "undefined" "crypto-orderer/tlsca.orderer.example.com-cert.pem" ""
      printItalics "Committing chaincode 'chaincode1' on channel 'my-channel1' as 'Org1'" "U1F618"
      chaincodeCommit "cli.org1.example.com" "peer0.org1.example.com:7041" "my-channel1" "chaincode1" "$version" "orderer0.group1.orderer.example.com:7030" "AND ('Org1MSP.member')" "undefined" "crypto-orderer/tlsca.orderer.example.com-cert.pem" "peer0.org1.example.com:7041" "crypto-peer/peer0.org1.example.com/tls/ca.crt" ""

    else
      echo "Warning! Skipping chaincode 'chaincode1' install. Chaincode directory is empty."
      echo "Looked in dir: '$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node'"
    fi
  fi
}

runDevModeChaincode() {
  echo "Running chaincode in dev mode is supported by Fablo only for V2 channel capabilities"
  exit 1
}

upgradeChaincode() {
  local chaincodeName="$1"
  if [ -z "$chaincodeName" ]; then
    echo "Error: chaincode name is not provided"
    exit 1
  fi

  local version="$2"
  if [ -z "$version" ]; then
    echo "Error: chaincode version is not provided"
    exit 1
  fi

  if [ "$chaincodeName" = "chaincode1" ]; then
    if [ -n "$(ls "$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node")" ]; then
      printHeadline "Packaging chaincode 'chaincode1'" "U1F60E"
      chaincodeBuild "chaincode1" "node" "$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node" "16"
      chaincodePackage "cli.org1.example.com" "peer0.org1.example.com:7041" "chaincode1" "$version" "node" printHeadline "Installing 'chaincode1' for Org1" "U1F60E"
      chaincodeInstall "cli.org1.example.com" "peer0.org1.example.com:7041" "chaincode1" "$version" "crypto-orderer/tlsca.orderer.example.com-cert.pem"
      chaincodeInstall "cli.org1.example.com" "peer1.org1.example.com:7042" "chaincode1" "$version" "crypto-orderer/tlsca.orderer.example.com-cert.pem"
      chaincodeApprove "cli.org1.example.com" "peer0.org1.example.com:7041" "my-channel1" "chaincode1" "$version" "orderer0.group1.orderer.example.com:7030" "AND ('Org1MSP.member')" "undefined" "crypto-orderer/tlsca.orderer.example.com-cert.pem" ""
      printItalics "Committing chaincode 'chaincode1' on channel 'my-channel1' as 'Org1'" "U1F618"
      chaincodeCommit "cli.org1.example.com" "peer0.org1.example.com:7041" "my-channel1" "chaincode1" "$version" "orderer0.group1.orderer.example.com:7030" "AND ('Org1MSP.member')" "undefined" "crypto-orderer/tlsca.orderer.example.com-cert.pem" "peer0.org1.example.com:7041" "crypto-peer/peer0.org1.example.com/tls/ca.crt" ""

    else
      echo "Warning! Skipping chaincode 'chaincode1' upgrade. Chaincode directory is empty."
      echo "Looked in dir: '$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node'"
    fi
  fi
}

notifyOrgsAboutChannels() {

  echo ""

}

printStartSuccessInfo() {
  printHeadline "Done! Enjoy your fresh network" "U1F984"
}

stopNetwork() {
  printHeadline "Stopping network" "U1F68F"
  (cd "$FABLO_NETWORK_ROOT"/fabric-docker && docker compose stop)
  sleep 4
}

networkDown() {
  printHeadline "Destroying network" "U1F916"
  (cd "$FABLO_NETWORK_ROOT"/fabric-docker && docker compose down)

  printf "Removing chaincode containers & images... \\U1F5D1 \\n"
  for container in $(docker ps -a | grep "dev-peer0.org1.example.com-chaincode1" | awk '{print $1}'); do
    echo "Removing container $container..."
    docker rm -f "$container" || echo "docker rm of $container failed. Check if all fabric dockers properly was deleted"
  done
  for image in $(docker images "dev-peer0.org1.example.com-chaincode1*" -q); do
    echo "Removing image $image..."
    docker rmi "$image" || echo "docker rmi of $image failed. Check if all fabric dockers properly was deleted"
  done
  for container in $(docker ps -a | grep "dev-peer1.org1.example.com-chaincode1" | awk '{print $1}'); do
    echo "Removing container $container..."
    docker rm -f "$container" || echo "docker rm of $container failed. Check if all fabric dockers properly was deleted"
  done
  for image in $(docker images "dev-peer1.org1.example.com-chaincode1*" -q); do
    echo "Removing image $image..."
    docker rmi "$image" || echo "docker rmi of $image failed. Check if all fabric dockers properly was deleted"
  done

  printf "Removing generated configs... \\U1F5D1 \\n"
  rm -rf "$FABLO_NETWORK_ROOT/fabric-config/config"
  rm -rf "$FABLO_NETWORK_ROOT/fabric-config/crypto-config"
  rm -rf "$FABLO_NETWORK_ROOT/fabric-config/chaincode-packages"

  printHeadline "Done! Network was purged" "U1F5D1"
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/docker-compose.yaml from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"networks:
  basic:

services:

  ca.orderer.example.com:
    container_name: ca.orderer.example.com
    image: hyperledger/fabric-ca:\${FABRIC_CA_VERSION}
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca.orderer.example.com
      - FABRIC_CA_SERVER_CA_CERTFILE=/etc/hyperledger/fabric-ca-server/crypto/ca.orderer.example.com-cert.pem
      - FABRIC_CA_SERVER_CA_KEYFILE=/etc/hyperledger/fabric-ca-server/crypto/priv-key.pem
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      - FABRIC_CA_SERVER_TLS_ENABLED=true
    ports:
      - 7020:7054
    working_dir: /etc/hyperledger/fabric-ca-server
    command: sh -c 'fabric-ca-server start -b \${ORDERER_CA_ADMIN_NAME}:\${ORDERER_CA_ADMIN_PASSWORD} -d'
    volumes:
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/ca/:/etc/hyperledger/fabric-ca-server/crypto
      - ../fabric-config/fabric-ca-server-config/orderer.example.com/fabric-ca-server-config.yaml:/etc/hyperledger/fabric-ca-server/fabric-ca-server-config.yaml
    networks:
      - basic

  cli.orderer.example.com:
    container_name: cli.orderer.example.com
    image: ghcr.io/fablo-io/fabric-tools:\${FABRIC_TOOLS_VERSION}
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      - CORE_PEER_ID=cli.orderer.example.com
      - CORE_CHAINCODE_KEEPALIVE=10
      #
      - CORE_PEER_LOCALMSPID=OrdererMSP
      - CORE_PEER_MSPCONFIGPATH=/var/hyperledger/cli/crypto/users/Admin@orderer.example.com/msp
      # enabled TLS
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/var/hyperledger/cli/crypto/users/Admin@orderer.example.com/tls/client.crt
      - CORE_PEER_TLS_KEY_FILE=/var/hyperledger/cli/crypto/users/Admin@orderer.example.com/tls/client.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/var/hyperledger/cli/crypto/users/Admin@orderer.example.com/tls/ca.crt
      - TLS_CA_CERT_PATH=/var/hyperledger/cli/crypto-orderer/tlsca.orderer.example.com-cert.pem
    working_dir: /var/hyperledger/cli/
    command: /bin/bash
    volumes:
      - /var/run/docker.sock:/host/var/run/docker.sock
      - ../fabric-docker/scripts/cli:/var/hyperledger/cli/scripts/
      - ../fabric-config/config:/var/hyperledger/cli/config/ # genesis.block and channel.tx's
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com:/var/hyperledger/cli/crypto/
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer0.group1.orderer.example.com/msp/tlscacerts/tlsca.orderer.example.com-cert.pem:/var/hyperledger/cli/crypto-orderer/tlsca.orderer.example.com-cert.pem:ro
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt:/var/hyperledger/cli/crypto-peer/peer0.org1.example.com/tls/ca.crt:ro
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt:/var/hyperledger/cli/crypto-peer/peer1.org1.example.com/tls/ca.crt:ro
      - ../fabric-config/chaincode-packages:/var/hyperledger/cli/chaincode-packages/
      - "$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node/:/var/hyperledger/cli/chaincode1/"
    networks:
      - basic

  orderer0.group1.orderer.example.com:
    container_name: orderer0.group1.orderer.example.com
    image: hyperledger/fabric-orderer:\${FABRIC_VERSION}
    environment:
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7030
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      # TLS Configuration
      - ORDERER_GENERAL_TLS_ENABLED=true
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      # Cluster TLS Configuration
      - ORDERER_GENERAL_CLUSTER_CLIENTCERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_CLUSTER_CLIENTPRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_CLUSTER_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      # V3 specific settings
      - ORDERER_GENERAL_BOOTSTRAPMETHOD=none
      - ORDERER_CHANNELPARTICIPATION_ENABLED=true
      # Admin endpoint configuration
      - ORDERER_ADMIN_TLS_ENABLED=true
      - ORDERER_ADMIN_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_ADMIN_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_ADMIN_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_ADMIN_TLS_CLIENTROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_ADMIN_LISTENADDRESS=0.0.0.0:7053
      # Metrics configuration
      - ORDERER_OPERATIONS_LISTENADDRESS=orderer0.group1.orderer.example.com:9443
      - ORDERER_METRICS_PROVIDER=prometheus
    working_dir: /var/hyperledger/orderer
    command: orderer
    ports:
      - 7030:7030
      - 8030:9440
    volumes:
      - ../fabric-config/config/:/var/hyperledger/config
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer0.group1.orderer.example.com/msp/:/var/hyperledger/orderer/msp
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer0.group1.orderer.example.com/tls/:/var/hyperledger/orderer/tls
    networks:
      - basic

  orderer1.group1.orderer.example.com:
    container_name: orderer1.group1.orderer.example.com
    image: hyperledger/fabric-orderer:\${FABRIC_VERSION}
    environment:
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7031
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      # TLS Configuration
      - ORDERER_GENERAL_TLS_ENABLED=true
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      # Cluster TLS Configuration
      - ORDERER_GENERAL_CLUSTER_CLIENTCERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_CLUSTER_CLIENTPRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_CLUSTER_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      # V3 specific settings
      - ORDERER_GENERAL_BOOTSTRAPMETHOD=none
      - ORDERER_CHANNELPARTICIPATION_ENABLED=true
      # Admin endpoint configuration
      - ORDERER_ADMIN_TLS_ENABLED=true
      - ORDERER_ADMIN_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_ADMIN_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_ADMIN_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_ADMIN_TLS_CLIENTROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_ADMIN_LISTENADDRESS=0.0.0.0:7053
      # Metrics configuration
      - ORDERER_OPERATIONS_LISTENADDRESS=orderer1.group1.orderer.example.com:9443
      - ORDERER_METRICS_PROVIDER=prometheus
    working_dir: /var/hyperledger/orderer
    command: orderer
    ports:
      - 7031:7031
      - 8031:9440
    volumes:
      - ../fabric-config/config/:/var/hyperledger/config
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer1.group1.orderer.example.com/msp/:/var/hyperledger/orderer/msp
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer1.group1.orderer.example.com/tls/:/var/hyperledger/orderer/tls
    networks:
      - basic

  orderer2.group1.orderer.example.com:
    container_name: orderer2.group1.orderer.example.com
    image: hyperledger/fabric-orderer:\${FABRIC_VERSION}
    environment:
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7032
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      # TLS Configuration
      - ORDERER_GENERAL_TLS_ENABLED=true
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      # Cluster TLS Configuration
      - ORDERER_GENERAL_CLUSTER_CLIENTCERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_CLUSTER_CLIENTPRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_CLUSTER_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      # V3 specific settings
      - ORDERER_GENERAL_BOOTSTRAPMETHOD=none
      - ORDERER_CHANNELPARTICIPATION_ENABLED=true
      # Admin endpoint configuration
      - ORDERER_ADMIN_TLS_ENABLED=true
      - ORDERER_ADMIN_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_ADMIN_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_ADMIN_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_ADMIN_TLS_CLIENTROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_ADMIN_LISTENADDRESS=0.0.0.0:7053
      # Metrics configuration
      - ORDERER_OPERATIONS_LISTENADDRESS=orderer2.group1.orderer.example.com:9443
      - ORDERER_METRICS_PROVIDER=prometheus
    working_dir: /var/hyperledger/orderer
    command: orderer
    ports:
      - 7032:7032
      - 8032:9440
    volumes:
      - ../fabric-config/config/:/var/hyperledger/config
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer2.group1.orderer.example.com/msp/:/var/hyperledger/orderer/msp
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer2.group1.orderer.example.com/tls/:/var/hyperledger/orderer/tls
    networks:
      - basic

  orderer3.group1.orderer.example.com:
    container_name: orderer3.group1.orderer.example.com
    image: hyperledger/fabric-orderer:\${FABRIC_VERSION}
    environment:
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7033
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      # TLS Configuration
      - ORDERER_GENERAL_TLS_ENABLED=true
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      # Cluster TLS Configuration
      - ORDERER_GENERAL_CLUSTER_CLIENTCERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_CLUSTER_CLIENTPRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_CLUSTER_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      # V3 specific settings
      - ORDERER_GENERAL_BOOTSTRAPMETHOD=none
      - ORDERER_CHANNELPARTICIPATION_ENABLED=true
      # Admin endpoint configuration
      - ORDERER_ADMIN_TLS_ENABLED=true
      - ORDERER_ADMIN_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_ADMIN_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_ADMIN_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_ADMIN_TLS_CLIENTROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_ADMIN_LISTENADDRESS=0.0.0.0:7053
      # Metrics configuration
      - ORDERER_OPERATIONS_LISTENADDRESS=orderer3.group1.orderer.example.com:9443
      - ORDERER_METRICS_PROVIDER=prometheus
    working_dir: /var/hyperledger/orderer
    command: orderer
    ports:
      - 7033:7033
      - 8033:9440
    volumes:
      - ../fabric-config/config/:/var/hyperledger/config
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer3.group1.orderer.example.com/msp/:/var/hyperledger/orderer/msp
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer3.group1.orderer.example.com/tls/:/var/hyperledger/orderer/tls
    networks:
      - basic

  ca.org1.example.com:
    container_name: ca.org1.example.com
    image: hyperledger/fabric-ca:\${FABRIC_CA_VERSION}
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca.org1.example.com
      - FABRIC_CA_SERVER_CA_CERTFILE=/etc/hyperledger/fabric-ca-server/crypto/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_CA_KEYFILE=/etc/hyperledger/fabric-ca-server/crypto/priv-key.pem
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      - FABRIC_CA_SERVER_TLS_ENABLED=true
    ports:
      - 7040:7054
    working_dir: /etc/hyperledger/fabric-ca-server
    command: sh -c 'fabric-ca-server start -b \${ORG1_CA_ADMIN_NAME}:\${ORG1_CA_ADMIN_PASSWORD} -d'
    volumes:
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server/crypto
      - ../fabric-config/fabric-ca-server-config/org1.example.com/fabric-ca-server-config.yaml:/etc/hyperledger/fabric-ca-server/fabric-ca-server-config.yaml
    networks:
      - basic

  cli.org1.example.com:
    container_name: cli.org1.example.com
    image: ghcr.io/fablo-io/fabric-tools:\${FABRIC_TOOLS_VERSION}
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      - CORE_PEER_ID=cli.org1.example.com
      - CORE_CHAINCODE_KEEPALIVE=10
      #
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_MSPCONFIGPATH=/var/hyperledger/cli/crypto/users/Admin@org1.example.com/msp
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7041
      # enabled TLS
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/var/hyperledger/cli/crypto/users/Admin@org1.example.com/tls/client.crt
      - CORE_PEER_TLS_KEY_FILE=/var/hyperledger/cli/crypto/users/Admin@org1.example.com/tls/client.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/var/hyperledger/cli/crypto/users/Admin@org1.example.com/tls/ca.crt
      - TLS_CA_CERT_PATH=/var/hyperledger/cli/crypto-orderer/tlsca.orderer.example.com-cert.pem
    working_dir: /var/hyperledger/cli/
    command: /bin/bash
    volumes:
      - /var/run/docker.sock:/host/var/run/docker.sock
      - ../fabric-docker/scripts/cli:/var/hyperledger/cli/scripts/
      - ../fabric-config/config:/var/hyperledger/cli/config/ # genesis.block and channel.tx's
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com:/var/hyperledger/cli/crypto/
      - ../fabric-config/crypto-config/peerOrganizations/orderer.example.com/peers/orderer0.group1.orderer.example.com/msp/tlscacerts/tlsca.orderer.example.com-cert.pem:/var/hyperledger/cli/crypto-orderer/tlsca.orderer.example.com-cert.pem:ro
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt:/var/hyperledger/cli/crypto-peer/peer0.org1.example.com/tls/ca.crt:ro
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt:/var/hyperledger/cli/crypto-peer/peer1.org1.example.com/tls/ca.crt:ro
      - ../fabric-config/chaincode-packages:/var/hyperledger/cli/chaincode-packages/
      - "$CHAINCODES_BASE_DIR/./chaincodes/chaincode-kv-node/:/var/hyperledger/cli/chaincode1/"
    networks:
      - basic

  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer:\${FABRIC_VERSION}
    environment:
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7041
      - CORE_PEER_LISTENADDRESS=peer0.org1.example.com:7041
      - CORE_PEER_GOSSIP_ENDPOINT=peer0.org1.example.com:7041
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7041
      - CORE_PEER_GOSSIP_BOOTSTRAP="peer0.org1.example.com:7041 peer1.org1.example.com:7042"
      - CORE_PEER_CHAINCODELISTENADDRESS=peer0.org1.example.com:7050
      - CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/fabric/peer/msp
      - CORE_CHAINCODE_BUILDER=hyperledger/fabric-ccenv:\${FABRIC_CCENV_VERSION}
      - CORE_CHAINCODE_GOLANG_RUNTIME=hyperledger/fabric-baseos:\${FABRIC_BASEOS_VERSION}
      - CORE_CHAINCODE_JAVA_RUNTIME=hyperledger/fabric-javaenv:\${FABRIC_JAVAENV_VERSION}
      - CORE_CHAINCODE_NODE_RUNTIME=hyperledger/fabric-nodeenv:\${FABRIC_NODEENV_VERSION}
      #
      - CORE_CHAINCODE_LOGGING_LEVEL=\${LOGGING_LEVEL}
      - CORE_CHAINCODE_LOGGING_SHIM=\${LOGGING_LEVEL}
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      # metrics
      - CORE_OPERATIONS_LISTENADDRESS=peer0.org1.example.com:9440
      - CORE_METRICS_PROVIDER=prometheus
      #
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=\${COMPOSE_PROJECT_NAME}_basic
      - CORE_VM_DOCKER_ATTACHSTDOUT=true
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - GODEBUG=netdns=go
      # enabled TLS
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/peer/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/peer/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/peer/tls/ca.crt
      # enabled gateway
      - CORE_PEER_GATEWAY_ENABLED=true
    working_dir: /etc/hyperledger/fabric/peer/
    command: peer node start
    ports:
      - 8041:9440
      - 7041:7041
    volumes:
      - /var/run/docker.sock:/host/var/run/docker.sock
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/peer/msp
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/peer/tls
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/users:/etc/hyperledger/fabric/peer/msp/users
      - ../fabric-config/config:/etc/hyperledger/fabric/config
    networks:
      - basic
  peer1.org1.example.com:
    container_name: peer1.org1.example.com
    image: hyperledger/fabric-peer:\${FABRIC_VERSION}
    environment:
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_ID=peer1.org1.example.com
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7042
      - CORE_PEER_LISTENADDRESS=peer1.org1.example.com:7042
      - CORE_PEER_GOSSIP_ENDPOINT=peer1.org1.example.com:7042
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.example.com:7042
      - CORE_PEER_GOSSIP_BOOTSTRAP="peer0.org1.example.com:7041 peer1.org1.example.com:7042"
      - CORE_PEER_CHAINCODELISTENADDRESS=peer1.org1.example.com:7050
      - CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/fabric/peer/msp
      - CORE_CHAINCODE_BUILDER=hyperledger/fabric-ccenv:\${FABRIC_CCENV_VERSION}
      - CORE_CHAINCODE_GOLANG_RUNTIME=hyperledger/fabric-baseos:\${FABRIC_BASEOS_VERSION}
      - CORE_CHAINCODE_JAVA_RUNTIME=hyperledger/fabric-javaenv:\${FABRIC_JAVAENV_VERSION}
      - CORE_CHAINCODE_NODE_RUNTIME=hyperledger/fabric-nodeenv:\${FABRIC_NODEENV_VERSION}
      #
      - CORE_CHAINCODE_LOGGING_LEVEL=\${LOGGING_LEVEL}
      - CORE_CHAINCODE_LOGGING_SHIM=\${LOGGING_LEVEL}
      - FABRIC_LOGGING_SPEC=\${LOGGING_LEVEL}
      # metrics
      - CORE_OPERATIONS_LISTENADDRESS=peer1.org1.example.com:9440
      - CORE_METRICS_PROVIDER=prometheus
      #
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=\${COMPOSE_PROJECT_NAME}_basic
      - CORE_VM_DOCKER_ATTACHSTDOUT=true
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - GODEBUG=netdns=go
      # enabled TLS
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/peer/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/peer/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/peer/tls/ca.crt
      # enabled gateway
      - CORE_PEER_GATEWAY_ENABLED=true
    working_dir: /etc/hyperledger/fabric/peer/
    command: peer node start
    ports:
      - 8042:9440
      - 7042:7042
    volumes:
      - /var/run/docker.sock:/host/var/run/docker.sock
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/fabric/peer/msp
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls:/etc/hyperledger/fabric/peer/tls
      - ../fabric-config/crypto-config/peerOrganizations/org1.example.com/users:/etc/hyperledger/fabric/peer/msp/users
      - ../fabric-config/config:/etc/hyperledger/fabric/config
    networks:
      - basic
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/base-functions.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

certsGenerate() {
  local CONTAINER_NAME=certsGenerate

  local CONFIG_PATH=$1
  local CRYPTO_CONFIG_FILE_NAME=$2
  local ORG_PATH=$3
  local OUTPUT_PATH=$4
  local FULL_CERT_PATH=$OUTPUT_PATH$ORG_PATH

  echo "Generating certs..."
  inputLog "CONFIG_PATH: $CONFIG_PATH"
  inputLog "CRYPTO_CONFIG_FILE_NAME: $CRYPTO_CONFIG_FILE_NAME"
  inputLog "ORG_PATH: $ORG_PATH"
  inputLog "OUTPUT_PATH: $OUTPUT_PATH"
  inputLog "FULL_CERT_PATH: $FULL_CERT_PATH"

  if [ -d "$FULL_CERT_PATH" ]; then
    echo "Can't generate certs, directory already exists : $FULL_CERT_PATH"
    echo "Try using 'reset' or 'down' to remove whole network or 'start' to reuse it"
    exit 1
  fi

  docker run -i -d -w="/" --name $CONTAINER_NAME ghcr.io/fablo-io/fabric-tools:"\${FABRIC_TOOLS_VERSION}" bash || removeContainer $CONTAINER_NAME
  docker cp "$CONFIG_PATH" $CONTAINER_NAME:/fabric-config || removeContainer $CONTAINER_NAME

  docker exec -i $CONTAINER_NAME cryptogen generate --config=./fabric-config/"$CRYPTO_CONFIG_FILE_NAME" || removeContainer $CONTAINER_NAME

  docker cp $CONTAINER_NAME:/crypto-config/. "$OUTPUT_PATH" || removeContainer $CONTAINER_NAME

  removeContainer $CONTAINER_NAME

  # shellcheck disable=2044
  for file in $(find "$OUTPUT_PATH"/ -iname '*_sk'); do
    dir=$(dirname "$file")
    mv "\${dir}"/*_sk "\${dir}"/priv-key.pem
  done
}

genesisBlockCreate() {
  local CONTAINER_NAME=genesisBlockCreate

  local CONFIG_PATH=$1
  local OUTPUT_PATH=$2
  local GENESIS_PROFILE_NAME=$3
  local GENESIS_FILE_NAME=$GENESIS_PROFILE_NAME.block

  echo "Creating genesis block..."
  inputLog "CONFIG_PATH: $CONFIG_PATH"
  inputLog "OUTPUT_PATH: $OUTPUT_PATH"
  inputLog "GENESIS_PROFILE_NAME: $GENESIS_PROFILE_NAME"
  inputLog "GENESIS_FILE_NAME: $GENESIS_FILE_NAME"

  if [ -f "$OUTPUT_PATH/$GENESIS_FILE_NAME" ]; then
    echo "Cant't generate genesis block, file already exists: $OUTPUT_PATH/$GENESIS_FILE_NAME"
    echo "Try using 'reset' or 'down' to remove whole network or 'start' to reuse it"
    exit 1
  fi

  docker run -i -d -w="/" --name $CONTAINER_NAME ghcr.io/fablo-io/fabric-tools:"\${FABRIC_TOOLS_VERSION}" bash || removeContainer $CONTAINER_NAME
  docker cp "$CONFIG_PATH" $CONTAINER_NAME:/fabric-config || removeContainer $CONTAINER_NAME

  docker exec -i $CONTAINER_NAME mkdir /config || removeContainer $CONTAINER_NAME
  docker exec -i $CONTAINER_NAME configtxgen --configPath ./fabric-config -profile "$GENESIS_PROFILE_NAME" -outputBlock "./config/$GENESIS_FILE_NAME" -channelID system-channel || removeContainer $CONTAINER_NAME

  mkdir -p "$OUTPUT_PATH"
  docker cp "$CONTAINER_NAME:/config/$GENESIS_FILE_NAME" "$OUTPUT_PATH/$GENESIS_FILE_NAME" || removeContainer $CONTAINER_NAME

  removeContainer $CONTAINER_NAME
}

createChannelTx() {
  local CONTAINER_NAME=createChannelTx

  local CHANNEL_NAME=$1
  local CONFIG_PATH=$2
  local CONFIG_PROFILE=$3
  local OUTPUT_PATH=$4
  local CHANNEL_TX_PATH="$OUTPUT_PATH/$CHANNEL_NAME.pb"

  echo "Creating channelTx for $CHANNEL_NAME..."
  inputLog "CONFIG_PATH: $CONFIG_PATH"
  inputLog "CONFIG_PROFILE: $CONFIG_PROFILE"
  inputLog "OUTPUT_PATH: $OUTPUT_PATH"
  inputLog "CHANNEL_TX_PATH: $CHANNEL_TX_PATH"

  if [ -f "$CHANNEL_TX_PATH" ]; then
    echo "Can't create channel configuration, it already exists : $CHANNEL_TX_PATH"
    echo "Try using 'reset' or 'down' to remove whole network or 'start' to reuse it"
    exit 1
  fi

  docker run --rm \\
    --name $CONTAINER_NAME \\
    -v "$CONFIG_PATH":/fabric-config \\
    -v "$OUTPUT_PATH":/output \\
    ghcr.io/fablo-io/fabric-tools:"\${FABRIC_TOOLS_VERSION}" \\
    bash -c "mkdir -p /output && configtxgen --configPath /fabric-config -profile \${CONFIG_PROFILE} -outputBlock /output/$CHANNEL_NAME.pb -channelID \${CHANNEL_NAME}"

  # shellcheck disable=SC2181
  if [ $? -ne 0 ]; then
    echo "Failed to create channel configuration transaction."
    exit 1
  fi

  echo "Channel configuration created at $CHANNEL_TX_PATH"

}

createNewChannelUpdateTx() {
  local CONTAINER_NAME=createAnchorPeerUpdateTx

  local CHANNEL_NAME=$1
  local MSP_NAME=$2
  local CONFIG_PROFILE=$3
  local CONFIG_PATH=$4
  local OUTPUT_PATH=$5

  ANCHOR_PEER_UPDATE_PATH="$OUTPUT_PATH/\${MSP_NAME}anchors-$CHANNEL_NAME.pb"
  OUTPUT_ANCHOR_PEERS_UPDATE_PATH="./config/\${MSP_NAME}anchors.pb"

  echo "Creating new channel config block. Channel: $CHANNEL_NAME for organization $MSP_NAME..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "MSP_NAME: $MSP_NAME"
  inputLog "CONFIG_PROFILE: $CONFIG_PROFILE"
  inputLog "CONFIG_PATH: $CONFIG_PATH"
  inputLog "OUTPUT_PATH: $OUTPUT_PATH"
  inputLog "ANCHOR_PEER_UPDATE_PATH: $ANCHOR_PEER_UPDATE_PATH"

  if [ -f "$ANCHOR_PEER_UPDATE_PATH" ]; then
    echo "Cant't create anchor peer update, it already exists : $ANCHOR_PEER_UPDATE_PATH"
    echo "Try using 'reset' or 'down' to remove whole network or 'start' to reuse it"
    exit 1
  fi

  docker run -i -d -w="/" --name $CONTAINER_NAME ghcr.io/fablo-io/fabric-tools:"\${FABRIC_TOOLS_VERSION}" bash || removeContainer $CONTAINER_NAME
  docker cp "$CONFIG_PATH" $CONTAINER_NAME:/fabric-config || removeContainer $CONTAINER_NAME

  docker exec -i $CONTAINER_NAME mkdir /config || removeContainer $CONTAINER_NAME
  docker exec -i $CONTAINER_NAME configtxgen \\
    --configPath ./fabric-config \\
    -profile "\${CONFIG_PROFILE}" \\
    -outputAnchorPeersUpdate "\${OUTPUT_ANCHOR_PEERS_UPDATE_PATH}" \\
    -channelID "\${CHANNEL_NAME}" \\
    -asOrg "\${MSP_NAME}" || removeContainer $CONTAINER_NAME

  docker cp "$CONTAINER_COPY_PATH" "$ANCHOR_PEER_UPDATE_PATH" || removeContainer $CONTAINER_NAME

  removeContainer $CONTAINER_NAME
}

notifyOrgAboutNewChannel() {
  local CHANNEL_NAME=$1
  local MSP_NAME=$2
  local CLI_NAME=$3
  local PEER_ADDRESS=$4
  local ORDERER_URL=$5
  local ANCHOR_PEER_UPDATE_PATH="/var/hyperledger/cli/config/\${MSP_NAME}anchors-$CHANNEL_NAME.tx"

  echo "Updating channel $CHANNEL_NAME for organization $MSP_NAME..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "MSP_NAME: $MSP_NAME"
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "ORDERER_URL: $ORDERER_URL"
  inputLog "ANCHOR_PEER_UPDATE_PATH: $ANCHOR_PEER_UPDATE_PATH"

  if [ -n "$ANCHOR_PEER_UPDATE_PATH" ]; then
    docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" \\
      "$CLI_NAME" peer channel update \\
      -c "$CHANNEL_NAME" \\
      -o "$ORDERER_URL" \\
      -f "$ANCHOR_PEER_UPDATE_PATH"
  else
    echo "channel update tx not found! Looked for: $ANCHOR_PEER_UPDATE_PATH"
  fi
}

notifyOrgAboutNewChannelTls() {
  local CHANNEL_NAME=$1
  local MSP_NAME=$2
  local CLI_NAME=$3
  local PEER_ADDRESS=$4
  local ORDERER_URL=$5
  local ANCHOR_PEER_UPDATE_PATH="/var/hyperledger/cli/config/\${MSP_NAME}anchors-$CHANNEL_NAME.tx"
  local CA_CERT="/var/hyperledger/cli/"\${6}

  echo "Updating channel $CHANNEL_NAME for organization $MSP_NAME (TLS)..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "MSP_NAME: $MSP_NAME"
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "ORDERER_URL: $ORDERER_URL"
  inputLog "ANCHOR_PEER_UPDATE_PATH: $ANCHOR_PEER_UPDATE_PATH"

  if [ -n "$ANCHOR_PEER_UPDATE_PATH" ]; then
    docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" \\
      "$CLI_NAME" peer channel update \\
      -c "$CHANNEL_NAME" \\
      -o "$ORDERER_URL" \\
      -f "$ANCHOR_PEER_UPDATE_PATH" \\
      --tls --cafile "$CA_CERT"
  else
    echo "channel update tx not found! Looked for: $ANCHOR_PEER_UPDATE_PATH"
  fi
}

deleteNewChannelUpdateTx() {
  local CHANNEL_NAME=$1
  local MSP_NAME=$2
  local CLI_NAME=$3
  local ANCHOR_PEER_UPDATE_PATH="/var/hyperledger/cli/config/\${MSP_NAME}anchors-$CHANNEL_NAME.tx"

  echo "Deleting new channel config block. Channel: $CHANNEL_NAME, Organization: $MSP_NAME"
  inputLogShort "CHANNEL_NAME: $CHANNEL_NAME, MSP_NAME: $MSP_NAME, CLI_NAME: $CLI_NAME, ANCHOR_PEER_UPDATE_PATH: $ANCHOR_PEER_UPDATE_PATH"

  if [ -n "$ANCHOR_PEER_UPDATE_PATH" ]; then
    docker exec "$CLI_NAME" rm "$ANCHOR_PEER_UPDATE_PATH"
  else
    echo "channel update tx not found! Looked for: $ANCHOR_PEER_UPDATE_PATH"
  fi
}

printHeadline() {
  bold=$'\\e[1m'
  end=$'\\e[0m'

  TEXT=$1
  EMOJI=$2
  printf "\${bold}============ %b %s %b ==============\${end}\\n" "\\\\$EMOJI" "$TEXT" "\\\\$EMOJI"
}

printItalics() {
  italics=$'\\e[3m'
  end=$'\\e[0m'

  TEXT=$1
  EMOJI=$2
  printf "\${italics}==== %b %s %b ====\${end}\\n" "\\\\$EMOJI" "$TEXT" "\\\\$EMOJI"
}

inputLog() {
  end=$'\\e[0m'
  darkGray=$'\\e[90m'

  echo "\${darkGray}   $1 \${end}"
}

inputLogShort() {
  end=$'\\e[0m'
  darkGray=$'\\e[90m'

  echo "\${darkGray}   $1 \${end}"
}

certsRemove() {
  local CERTS_DIR_PATH=$1
  rm -rf "$CERTS_DIR_PATH"
}

removeContainer() {
  CONTAINER_NAME=$1
  docker rm -f "$CONTAINER_NAME"
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/base-help.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

printHelp() {
  echo "Fablo is powered by SoftwareMill"

  echo ""
  echo "usage: ./fabric-docker.sh <command>"
  echo ""

  echo "Commands: "
  echo ""
  echo "./fabric-docker.sh up"
  echo -e "\\t Use for first run. Creates all needed artifacts (certs, genesis block) and starts network for the first time."
  echo -e "\\t After 'up' commands start/stop are used to manage network and rerun to rerun it"
  echo ""
  echo "./fabric-docker.sh down"
  echo -e "\\t Back to empty state - destorys created containers, prunes generated certificates, configs."
  echo ""
  echo "./fabric-docker.sh start"
  echo -e "\\t Starts already created network."
  echo ""
  echo "./fabric-docker.sh stop"
  echo -e "\\t Stops already running network."
  echo ""
  echo "./fabric-docker.sh reset"
  echo -e "\\t Fresh start - it destroys whole network, certs, configs and then reruns everything."
  echo ""
  echo "./fabric-docker.sh channel --help"
  echo -e "\\t Detailed help for channel management scripts."
  echo ""
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/chaincode-functions.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash
# phrase "\${CA_CERT_PARAMS[@]+"\${CA_CERT_PARAMS[@]}"}" is needed in older bash versions ( <4 ) for array expansion.
# see: https://stackoverflow.com/questions/7577052/bash-empty-array-expansion-with-set-u

dockerPullIfMissing() {
  local IMAGE="$1"
  if [[ "$(docker images -q "$IMAGE" 2>/dev/null)" == "" ]]; then
    docker pull --platform linux/x86_64 "$IMAGE"
  fi
}

node_version_check() {

  local fabric_shim_version="$1"
  local nodejs_version

  if [[ "$fabric_shim_version" == *"1.4."* ]]; then
    nodejs_version=8.9

  elif [[ "$fabric_shim_version" == *"2.2."* || "$fabric_shim_version" == *"2.3."* ]]; then
    nodejs_version=12.13

  elif [[ "$fabric_shim_version" == *"2.4."* ]]; then
    nodejs_version=16.16

  elif [[ "$fabric_shim_version" == *"2.5."* ]]; then
    nodejs_version=18.12

  else
    nodejs_version=18.12
  fi

  echo $nodejs_version

}

chaincodeBuild() {
  local CHAINCODE_NAME=$1
  local CHAINCODE_LANG=$2
  local CHAINCODE_DIR_PATH=$3
  local RECOMMENDED_NODE_VERSION=$4

  mkdir -p "$CHAINCODE_DIR_PATH"

  # pull required images upfront in case of arm64 (Apple Silicon) architecture
  # see https://stackoverflow.com/questions/69699421/hyperledger-fabric-chaincode-installation-failed-no-matching-manifest-for-linu
  # also, starting from Fabric 2.5, the base images for chaincode are available for arm64, so we don't need to pull them separately
  # and we use \`sort -V\` to compare versions, because \`sort\` handles versions like \`2.4\` and \`2.10\` correctly
  if [ "$(uname -m)" = "arm64" ] && [ "$(printf '%s\\n' "$FABRIC_VERSION" "2.5" | sort -V | head -n1)" = "$FABRIC_VERSION" ]; then
    if [ "$CHAINCODE_LANG" = "node" ]; then
      dockerPullIfMissing "hyperledger/fabric-nodeenv:$FABRIC_NODEENV_VERSION"
    fi
    if [ "$CHAINCODE_LANG" = "java" ]; then
      dockerPullIfMissing "hyperledger/fabric-javaenv:$FABRIC_JAVAENV_VERSION"
    fi
    if [ "$CHAINCODE_LANG" = "golang" ]; then
      dockerPullIfMissing "hyperledger/fabric-baseos:$FABRIC_BASEOS_VERSION"
    fi
  fi

  if [ "$CHAINCODE_LANG" = "node" ]; then
    NODE_VERSION=$(node --version)
    fabric_shim_version=$(jq -r '.dependencies."fabric-shim"' "$CHAINCODE_DIR_PATH/package.json")
    RECOMMENDED_NODE_VERSION=$(node_version_check "$fabric_shim_version")

    if ! echo "$NODE_VERSION" | grep -q "v$RECOMMENDED_NODE_VERSION"; then
      echo "Warning: Your Node.js version is $NODE_VERSION, but recommended is $RECOMMENDED_NODE_VERSION)"
      echo "See: https://github.com/hyperledger/fabric-chaincode-node/blob/main/COMPATIBILITY.md"
    fi

    echo "Buiding chaincode '$CHAINCODE_NAME'..."
    inputLog "CHAINCODE_NAME: $CHAINCODE_NAME"
    inputLog "CHAINCODE_LANG: $CHAINCODE_LANG"
    inputLog "CHAINCODE_DIR_PATH: $CHAINCODE_DIR_PATH"
    inputLog "NODE_VERSION: $NODE_VERSION (recommended: $RECOMMENDED_NODE_VERSION)"

    # Default to using npm for installation and build
    (cd "$CHAINCODE_DIR_PATH" && npm install && npm run build)

  fi
}

chaincodePackage() {
  local CLI_NAME=$1
  local PEER_ADDRESS=$2
  local CHAINCODE_NAME=$3
  local CHAINCODE_VERSION=$4
  local CHAINCODE_LABEL="\${CHAINCODE_NAME}_$CHAINCODE_VERSION"
  local CHAINCODE_LANG=$5

  echo "Packaging chaincode $CHAINCODE_NAME..."
  inputLog "CHAINCODE_VERSION: $CHAINCODE_VERSION"
  inputLog "CHAINCODE_LANG: $CHAINCODE_LANG"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "CLI_NAME: $CLI_NAME"

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer lifecycle chaincode package \\
    "/var/hyperledger/cli/chaincode-packages/$CHAINCODE_LABEL.tar.gz" \\
    --path "/var/hyperledger/cli/$CHAINCODE_NAME/" \\
    --lang "$CHAINCODE_LANG" \\
    --label "$CHAINCODE_LABEL"

  # set package owner as current (host) user to fix permission issues
  docker exec "$CLI_NAME" chown "$(id -u):$(id -g)" "/var/hyperledger/cli/chaincode-packages/$CHAINCODE_LABEL.tar.gz"
}

chaincodeInstall() {
  local CLI_NAME=$1
  local PEER_ADDRESS=$2
  local CHAINCODE_NAME=$3
  local CHAINCODE_VERSION=$4
  local CHAINCODE_LABEL="\${CHAINCODE_NAME}_$CHAINCODE_VERSION"
  local CA_CERT=$5

  echo "Installing chaincode $CHAINCODE_NAME..."
  inputLog "CHAINCODE_VERSION: $CHAINCODE_VERSION"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "CA_CERT: $CA_CERT"

  local CA_CERT_PARAMS=()
  if [ -n "$CA_CERT" ]; then
    CA_CERT_PARAMS=(--tlsRootCertFiles "/var/hyperledger/cli/$CA_CERT")
  fi

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer lifecycle chaincode install \\
    "/var/hyperledger/cli/chaincode-packages/$CHAINCODE_LABEL.tar.gz" \\
    "\${CA_CERT_PARAMS[@]+"\${CA_CERT_PARAMS[@]}"}"
}

chaincodeApprove() {
  local CLI_NAME=$1
  local PEER_ADDRESS=$2
  local CHANNEL_NAME="$3"
  local CHAINCODE_NAME=$4
  local CHAINCODE_VERSION=$5
  local CHAINCODE_LABEL="\${CHAINCODE_NAME}_$CHAINCODE_VERSION"
  local ORDERER_URL=$6
  local ENDORSEMENT=$7
  local INIT_REQUIRED=$8
  local CA_CERT=$9
  local COLLECTIONS_CONFIG=\${10}

  echo "Approving chaincode $CHAINCODE_NAME..."
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CHAINCODE_NAME: $CHAINCODE_NAME"
  inputLog "CHAINCODE_VERSION: $CHAINCODE_VERSION"
  inputLog "ORDERER_URL: $ORDERER_URL"
  inputLog "ENDORSEMENT: $ENDORSEMENT"
  inputLog "INIT_REQUIRED: $INIT_REQUIRED"
  inputLog "CA_CERT: $CA_CERT"
  inputLog "COLLECTIONS_CONFIG: $COLLECTIONS_CONFIG"

  local CA_CERT_PARAMS=()
  if [ -n "$CA_CERT" ]; then
    CA_CERT_PARAMS=(--tls --cafile "/var/hyperledger/cli/$CA_CERT")
  fi

  local ENDORSEMENT_PARAMS=()
  if [ -n "$ENDORSEMENT" ]; then
    ENDORSEMENT_PARAMS=(--signature-policy "$ENDORSEMENT")
  fi

  local INIT_REQUIRED_PARAMS=()
  if [ "$INIT_REQUIRED" = "true" ]; then
    INIT_REQUIRED_PARAMS=(--init-required)
  fi

  local COLLECTIONS_CONFIG_PARAMS=()
  if [ -n "$COLLECTIONS_CONFIG" ]; then
    COLLECTIONS_CONFIG_PARAMS=(--collections-config "$COLLECTIONS_CONFIG")
  fi

  local QUERYINSTALLED_RESPONSE
  local CC_PACKAGE_ID

  QUERYINSTALLED_RESPONSE="$(
    docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer lifecycle chaincode queryinstalled \\
      --output json \\
      "\${CA_CERT_PARAMS[@]+"\${CA_CERT_PARAMS[@]}"}"
  )"
  CC_PACKAGE_ID="$(jq ".installed_chaincodes | [.[]? | select(.label==\\"$CHAINCODE_LABEL\\") ][0].package_id // \\"\\"" -r <<<"$QUERYINSTALLED_RESPONSE")"
  if [ -z "$CC_PACKAGE_ID" ]; then
    CC_PACKAGE_ID="$CHAINCODE_NAME:$CHAINCODE_VERSION"
  fi
  inputLog "CC_PACKAGE_ID: $CC_PACKAGE_ID"

  local QUERYCOMMITTED_RESPONSE
  local SEQUENCE

  QUERYCOMMITTED_RESPONSE="$(
    docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer lifecycle chaincode querycommitted \\
      --channelID "$CHANNEL_NAME" \\
      --output json \\
      "\${CA_CERT_PARAMS[@]+"\${CA_CERT_PARAMS[@]}"}"
  )"
  SEQUENCE="$(jq ".chaincode_definitions | [.[]? | select(.name==\\"$CHAINCODE_NAME\\").sequence ] | max | select(.!= null)" -r <<<"$QUERYCOMMITTED_RESPONSE")"
  SEQUENCE=$((SEQUENCE + 1))
  inputLog "SEQUENCE: $SEQUENCE"

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" -e CC_PACKAGE_ID="$CC_PACKAGE_ID" "$CLI_NAME" peer lifecycle chaincode approveformyorg \\
    -o "$ORDERER_URL" \\
    -C "$CHANNEL_NAME" \\
    -n "$CHAINCODE_NAME" \\
    -v "$CHAINCODE_VERSION" \\
    --package-id "$CC_PACKAGE_ID" \\
    --sequence "$SEQUENCE" \\
    "\${ENDORSEMENT_PARAMS[@]+"\${ENDORSEMENT_PARAMS[@]}"}" \\
    "\${INIT_REQUIRED_PARAMS[@]+"\${INIT_REQUIRED_PARAMS[@]}"}" \\
    "\${COLLECTIONS_CONFIG_PARAMS[@]+"\${COLLECTIONS_CONFIG_PARAMS[@]}"}" \\
    "\${CA_CERT_PARAMS[@]+"\${CA_CERT_PARAMS[@]}"}"
}

chaincodeCommit() {
  local CLI_NAME=$1
  local PEER_ADDRESS=$2
  local CHANNEL_NAME="$3"
  local CHAINCODE_NAME=$4
  local CHAINCODE_VERSION=$5
  local ORDERER_URL=$6
  local ENDORSEMENT=$7
  local INIT_REQUIRED=$8
  local CA_CERT=$9
  local COMMIT_PEER_ADDRESSES=\${10}
  local TLS_ROOT_CERT_FILES=\${11}
  local COLLECTIONS_CONFIG=\${12}

  echo "Committing chaincode $CHAINCODE_NAME..."
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CHAINCODE_NAME: $CHAINCODE_NAME"
  inputLog "CHAINCODE_VERSION: $CHAINCODE_VERSION"
  inputLog "ORDERER_URL: $ORDERER_URL"
  inputLog "ENDORSEMENT: $ENDORSEMENT"
  inputLog "INIT_REQUIRED: $INIT_REQUIRED"
  inputLog "CA_CERT: $CA_CERT"
  inputLog "COMMIT_PEER_ADDRESSES: $COMMIT_PEER_ADDRESSES"
  inputLog "TLS_ROOT_CERT_FILES: $TLS_ROOT_CERT_FILES"
  inputLog "COLLECTIONS_CONFIG: $COLLECTIONS_CONFIG"

  local CA_CERT_PARAMS=()
  if [ -n "$CA_CERT" ]; then
    CA_CERT_PARAMS=(--tls --cafile "/var/hyperledger/cli/$CA_CERT")
  fi

  local COMMIT_PEER_PARAMS=()
  if [ -n "$COMMIT_PEER_ADDRESSES" ]; then
    # shellcheck disable=SC2207
    COMMIT_PEER_PARAMS=($(echo ",$COMMIT_PEER_ADDRESSES" | sed 's/,/ --peerAddresses /g'))
  fi

  local TLS_ROOT_CERT_PARAMS=()
  if [ -n "$TLS_ROOT_CERT_FILES" ]; then
    # shellcheck disable=SC2207
    TLS_ROOT_CERT_PARAMS=(--tls $(echo ",$TLS_ROOT_CERT_FILES" | sed 's/,/ --tlsRootCertFiles \\/var\\/hyperledger\\/cli\\//g'))
  fi

  local ENDORSEMENT_PARAMS=()
  if [ -n "$ENDORSEMENT" ]; then
    ENDORSEMENT_PARAMS=(--signature-policy "$ENDORSEMENT")
  fi

  local INIT_REQUIRED_PARAMS=()
  if [ "$INIT_REQUIRED" = "true" ]; then
    INIT_REQUIRED_PARAMS=(--init-required)
  fi

  local COLLECTIONS_CONFIG_PARAMS=()
  if [ -n "$COLLECTIONS_CONFIG" ]; then
    COLLECTIONS_CONFIG_PARAMS=(--collections-config "$COLLECTIONS_CONFIG")
  fi

  local QUERYCOMMITTED_RESPONSE
  local SEQUENCE

  QUERYCOMMITTED_RESPONSE="$(
    docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer lifecycle chaincode querycommitted \\
      --channelID "$CHANNEL_NAME" \\
      --output json \\
      "\${CA_CERT_PARAMS[@]+"\${CA_CERT_PARAMS[@]}"}"
  )"
  SEQUENCE="$(jq ".chaincode_definitions | [.[]? | select(.name==\\"$CHAINCODE_NAME\\").sequence ] | max | select(.!= null)" -r <<<"$QUERYCOMMITTED_RESPONSE")"
  SEQUENCE=$((SEQUENCE + 1))
  inputLog "SEQUENCE: $SEQUENCE"

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer lifecycle chaincode commit \\
    -o "$ORDERER_URL" \\
    -C "$CHANNEL_NAME" \\
    -n "$CHAINCODE_NAME" \\
    -v "$CHAINCODE_VERSION" \\
    --sequence "$SEQUENCE" \\
    "\${ENDORSEMENT_PARAMS[@]+"\${ENDORSEMENT_PARAMS[@]}"}" \\
    "\${INIT_REQUIRED_PARAMS[@]+"\${INIT_REQUIRED_PARAMS[@]}"}" \\
    "\${COLLECTIONS_CONFIG_PARAMS[@]+"\${COLLECTIONS_CONFIG_PARAMS[@]}"}" \\
    "\${COMMIT_PEER_PARAMS[@]+"\${COMMIT_PEER_PARAMS[@]}"}" \\
    "\${TLS_ROOT_CERT_PARAMS[@]+"\${TLS_ROOT_CERT_PARAMS[@]}"}" \\
    "\${CA_CERT_PARAMS[@]+"\${CA_CERT_PARAMS[@]}"}"
}

peerChaincodeList() {
  local CLI_NAME=$1
  local PEER_ADDRESS=$2
  local CHANNEL_NAME=$3

  echo "Chaincodes list:"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"

  # Execute the command to list chaincodes
  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer lifecycle chaincode querycommitted \\
    --channelID "$CHANNEL_NAME"
}

peerChaincodeListTls() {
  local CLI_NAME=$1
  local PEER_ADDRESS=$2
  local CHANNEL_NAME=$3
  local CA_CERT=$4

  echo "Chaincodes list:"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CA_CERT: $CA_CERT"

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer lifecycle chaincode querycommitted \\
    --channelID "$CHANNEL_NAME" \\
    --tls \\
    --cafile "/var/hyperledger/cli/$CA_CERT"
}

# Function to perform chaincode invoke
peerChaincodeInvoke() {
  local CLI="$1"
  local PEERS="$2"
  local CHANNEL="$3"
  local CHAINCODE="$4"
  local COMMAND="$5"
  local TRANSIENT="$6"

  echo "Chaincode invoke:"
  inputLog "CLI: $CLI"
  inputLog "PEERS: $PEERS"
  inputLog "CHANNEL: $CHANNEL"
  inputLog "CHAINCODE: $CHAINCODE"
  inputLog "COMMAND: $COMMAND"
  inputLog "TRANSIENT: $TRANSIENT"

  PEER_ADDRESSES="--peerAddresses $(echo "$PEERS" | sed 's/,/ --peerAddresses  /g')"

  # shellcheck disable=SC2086
  docker exec "$CLI" peer chaincode invoke \\
    $PEER_ADDRESSES \\
    -C "$CHANNEL" \\
    -n "$CHAINCODE" \\
    -c "$COMMAND" \\
    --transient "$TRANSIENT" \\
    --waitForEvent \\
    --waitForEventTimeout 90s \\
    2>&1
}
# Function to perform chaincode invoke for Tls
peerChaincodeInvokeTls() {
  local CLI="$1"
  local PEERS="$2"
  local CHANNEL="$3"
  local CHAINCODE="$4"
  local COMMAND="$5"
  local TRANSIENT="$6"
  local PEER_CERTS="$7"
  local CA_CERT="$8"

  echo "Chaincode invoke:"
  inputLog "CLI: $CLI"
  inputLog "PEERS: $PEERS"
  inputLog "CHANNEL: $CHANNEL"
  inputLog "CHAINCODE: $CHAINCODE"
  inputLog "COMMAND: $COMMAND"
  inputLog "TRANSIENT: $TRANSIENT"
  inputLog "PEER_CERTS: $PEER_CERTS"
  inputLog "CA_CERT: $CA_CERT"

  PEER_ADDRESSES="--peerAddresses $(echo "$PEERS" | sed 's/,/ --peerAddresses  /g')"

  TLS_ROOT_CERT_FILES="--tlsRootCertFiles /var/hyperledger/cli/$(echo "$PEER_CERTS" | sed 's/,/ --tlsRootCertFiles \\/var\\/hyperledger\\/cli\\//g')"

  # shellcheck disable=SC2086
  docker exec "$CLI" peer chaincode invoke \\
    $PEER_ADDRESSES \\
    $TLS_ROOT_CERT_FILES \\
    -C "$CHANNEL" \\
    -n "$CHAINCODE" \\
    -c "$COMMAND" \\
    --transient "$TRANSIENT" \\
    --waitForEvent \\
    --waitForEventTimeout 90s \\
    --tls \\
    --cafile "/var/hyperledger/cli/$CA_CERT" \\
    2>&1
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/channel-query-functions.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

peerChannelList() {
  local CLI_NAME=$1
  local PEER_ADDRESS=$2

  echo "Listing channels using $CLI_NAME using peer $PEER_ADDRESS..."
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer channel list
}

peerChannelGetInfo() {
  local CHANNEL_NAME=$1
  local CLI_NAME=$2
  local PEER_ADDRESS=$3

  echo "Getting info about $CHANNEL_NAME using peer $PEER_ADDRESS..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer channel getinfo \\
    -c "$CHANNEL_NAME"
}

peerChannelFetchConfig() {
  local CHANNEL_NAME=$1
  local CLI_NAME=$2
  local CONFIG_FILE_NAME=$3
  local PEER_ADDRESS=$4

  echo "Fetching config block from $CHANNEL_NAME using peer $PEER_ADDRESS..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "CONFIG_FILE_NAME: $CONFIG_FILE_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"

  docker exec "$CLI_NAME" mkdir -p /tmp/hyperledger/assets/
  docker exec \\
    -e CORE_PEER_ADDRESS="$PEER_ADDRESS" \\
    "$CLI_NAME" peer channel fetch config /tmp/hyperledger/assets/config_block_before.pb \\
    -c "$CHANNEL_NAME"

  docker exec "$CLI_NAME" chmod 777 /tmp/hyperledger/assets/config_block_before.pb
  docker exec \\
    -e CORE_PEER_ADDRESS="$PEER_ADDRESS" \\
    "$CLI_NAME" configtxlator proto_decode \\
    --input /tmp/hyperledger/assets/config_block_before.pb \\
    --type common.Block |
    jq .data.data[0].payload.data.config >"$CONFIG_FILE_NAME"

  docker exec "$CLI_NAME" rm -rf /tmp/hyperledger/assets/
}

peerChannelFetchBlock() {
  local CHANNEL_NAME="$1"
  local CLI_NAME="$2"
  local BLOCK_NAME="$3"
  local PEER_ADDRESS="$4"
  local TARGET_FILE="$5"
  local TEMP_FILE="/tmp/hyperledger/blocks/$BLOCK_NAME.block"

  echo "Fetching block $BLOCK_NAME from $CHANNEL_NAME using peer $PEER_ADDRESS..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "BLOCK_NAME: $BLOCK_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "TARGET_FILE: $TARGET_FILE"

  docker exec "$CLI_NAME" mkdir -p /tmp/hyperledger/blocks/

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" \\
    "$CLI_NAME" peer channel fetch "$BLOCK_NAME" "$TEMP_FILE" \\
    -c "$CHANNEL_NAME"

  docker exec "$CLI_NAME" cat "$TEMP_FILE" >"$TARGET_FILE"

  docker exec "$CLI_NAME" rm -rf /tmp/hyperledger/blocks/
}

#=== TLS equivalents =========================================================

peerChannelListTls() {
  local CLI_NAME=$1
  local PEER_ADDRESS=$2
  local CA_CERT=$3

  echo "Listing channels using $CLI_NAME using peer $PEER_ADDRESS (TLS)..."
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer channel list --tls --cafile "$CA_CERT"
}

peerChannelGetInfoTls() {
  local CHANNEL_NAME=$1
  local CLI_NAME=$2
  local PEER_ADDRESS=$3
  local CA_CERT=$4

  echo "Getting info about $CHANNEL_NAME using peer $PEER_ADDRESS (TLS)..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" "$CLI_NAME" peer channel getinfo \\
    -c "$CHANNEL_NAME" --tls --cafile "$CA_CERT"
}

peerChannelFetchConfigTls() {
  local CHANNEL_NAME=$1
  local CLI_NAME=$2
  local CONFIG_FILE_NAME=$3
  local PEER_ADDRESS=$4
  local CA_CERT=$5

  echo "Fetching config block from $CHANNEL_NAME using peer $PEER_ADDRESS (TLS)..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "CONFIG_FILE_NAME: $CONFIG_FILE_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"

  docker exec "$CLI_NAME" mkdir -p /tmp/hyperledger/assets/
  docker exec \\
    -e CORE_PEER_ADDRESS="$PEER_ADDRESS" \\
    "$CLI_NAME" peer channel fetch config /tmp/hyperledger/assets/config_block_before.pb \\
    -c "$CHANNEL_NAME" --tls --cafile "$CA_CERT"

  docker exec "$CLI_NAME" chmod 777 /tmp/hyperledger/assets/config_block_before.pb
  docker exec \\
    -e CORE_PEER_ADDRESS="$PEER_ADDRESS" \\
    "$CLI_NAME" configtxlator proto_decode \\
    --input /tmp/hyperledger/assets/config_block_before.pb \\
    --type common.Block |
    jq .data.data[0].payload.data.config >"$CONFIG_FILE_NAME"

  docker exec "$CLI_NAME" rm -rf /tmp/hyperledger/assets/
}

peerChannelFetchBlockTls() {
  local CHANNEL_NAME="$1"
  local CLI_NAME="$2"
  local BLOCK_NAME="$3"
  local PEER_ADDRESS="$4"
  local CA_CERT="$5"
  local TARGET_FILE="$6"
  local TEMP_FILE="/tmp/hyperledger/blocks/$BLOCK_NAME.block"

  echo "Fetching block $BLOCK_NAME from $CHANNEL_NAME using peer $PEER_ADDRESS..."
  inputLog "CHANNEL_NAME: $CHANNEL_NAME"
  inputLog "CLI_NAME: $CLI_NAME"
  inputLog "BLOCK_NAME: $BLOCK_NAME"
  inputLog "PEER_ADDRESS: $PEER_ADDRESS"
  inputLog "TARGET_FILE: $TARGET_FILE"

  docker exec "$CLI_NAME" mkdir -p /tmp/hyperledger/blocks/

  docker exec -e CORE_PEER_ADDRESS="$PEER_ADDRESS" \\
    "$CLI_NAME" peer channel fetch "$BLOCK_NAME" "$TEMP_FILE" \\
    -c "$CHANNEL_NAME" --tls --cafile "$CA_CERT"

  docker exec "$CLI_NAME" cat "$TEMP_FILE" >"$TARGET_FILE"

  docker exec "$CLI_NAME" rm -rf /tmp/hyperledger/blocks/
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/cli/channel_fns.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

set -eu

createChannelAndJoin() {
  local CHANNEL_NAME=$1

  local CORE_PEER_LOCALMSPID=$2
  local CORE_PEER_ADDRESS=$3
  local CORE_PEER_MSPCONFIGPATH=$(realpath "$4")

  local ORDERER_URL=$5

  local DIR_NAME=step-createChannelAndJoin-$CHANNEL_NAME-$CORE_PEER_ADDRESS

  echo "Creating channel with name: \${CHANNEL_NAME}"
  echo "   Orderer: $ORDERER_URL"
  echo "   CORE_PEER_LOCALMSPID: $CORE_PEER_LOCALMSPID"
  echo "   CORE_PEER_ADDRESS: $CORE_PEER_ADDRESS"
  echo "   CORE_PEER_MSPCONFIGPATH: $CORE_PEER_MSPCONFIGPATH"

  mkdir "$DIR_NAME" && cd "$DIR_NAME"

  cp /var/hyperledger/cli/config/"$CHANNEL_NAME".pb .

  osnadmin channel join --channelID "\${CHANNEL_NAME}" --config-block ./"$CHANNEL_NAME".pb -o "\${ORDERER_URL}"
  cd .. && rm -rf "$DIR_NAME"
}

createChannelAndJoinTls() {
  local CHANNEL_NAME=$1
  local ORDERER_MSP_NAME=$2
  local ORDERER_ADMIN_ADDRESS=$3
  local ADMIN_TLS_SIGN_CERT=$(realpath "$4")
  local ADMIN_TLS_PRIVATE_KEY=$(realpath "$5")
  local TLS_CA_CERT_PATH=$(realpath "$6")

  local DIR_NAME=step-createChannelAndJoinTls-$CHANNEL_NAME-$ORDERER_MSP_NAME

  echo "Creating channel with name (TLS): \${CHANNEL_NAME}"
  echo "   ORDERER_MSP_NAME:      $ORDERER_MSP_NAME"
  echo "   ORDERER_ADMIN_ADDRESS: $ORDERER_ADMIN_ADDRESS"
  echo "   ADMIN_TLS_SIGN_CERT:   $ADMIN_TLS_SIGN_CERT"
  echo "   ADMIN_TLS_PRIVATE_KEY: $ADMIN_TLS_PRIVATE_KEY"
  echo "   TLS_CA_CERT_PATH:      $TLS_CA_CERT_PATH"

  if [ ! -d "$DIR_NAME" ]; then
    mkdir -p "$DIR_NAME"
    cp /var/hyperledger/cli/config/"$CHANNEL_NAME".pb "$DIR_NAME"
  fi

  osnadmin channel join \\
    --channelID "\${CHANNEL_NAME}" \\
    --config-block "$DIR_NAME/$CHANNEL_NAME.pb" \\
    -o "\${ORDERER_ADMIN_ADDRESS}" \\
    --client-cert "\${ADMIN_TLS_SIGN_CERT}" \\
    --client-key "\${ADMIN_TLS_PRIVATE_KEY}" \\
    --ca-file "\${TLS_CA_CERT_PATH}"

  cd ..
  rm -rf "$DIR_NAME"
}

fetchChannelAndJoin() {
  local CHANNEL_NAME=$1
  local CORE_PEER_LOCALMSPID=$2
  local CORE_PEER_ADDRESS=$3
  local CORE_PEER_MSPCONFIGPATH=$(realpath "$4")
  local ORDERER_URL=$5

  local DIR_NAME=step-fetchChannelAndJoin-$CHANNEL_NAME-$CORE_PEER_ADDRESS

  echo "Fetching channel with name: \${CHANNEL_NAME}"
  echo "   Orderer: $ORDERER_URL"
  echo "   CORE_PEER_LOCALMSPID: $CORE_PEER_LOCALMSPID"
  echo "   CORE_PEER_ADDRESS: $CORE_PEER_ADDRESS"
  echo "   CORE_PEER_MSPCONFIGPATH: $CORE_PEER_MSPCONFIGPATH"

  mkdir "$DIR_NAME" && cd "$DIR_NAME"

  peer channel fetch newest -c "\${CHANNEL_NAME}" --orderer "\${ORDERER_URL}"
  peer channel join -b "\${CHANNEL_NAME}"_newest.block

  cd .. && rm -rf "$DIR_NAME"
}

fetchChannelAndJoinTls() {
  local CHANNEL_NAME=$1
  local CORE_PEER_LOCALMSPID=$2
  local CORE_PEER_ADDRESS=$3
  local CORE_PEER_MSPCONFIGPATH=$(realpath "$4")
  local CORE_PEER_TLS_MSPCONFIGPATH=$(realpath "$5")
  local TLS_CA_CERT_PATH=$(realpath "$6")
  local ORDERER_URL=$7

  local CORE_PEER_TLS_CERT_FILE=$CORE_PEER_TLS_MSPCONFIGPATH/client.crt
  local CORE_PEER_TLS_KEY_FILE=$CORE_PEER_TLS_MSPCONFIGPATH/client.key
  local CORE_PEER_TLS_ROOTCERT_FILE=$CORE_PEER_TLS_MSPCONFIGPATH/ca.crt

  local DIR_NAME=step-fetchChannelAndJoinTls-$CHANNEL_NAME-$CORE_PEER_ADDRESS

  echo "Fetching channel with name (TLS): \${CHANNEL_NAME}"
  echo "   Orderer: $ORDERER_URL"
  echo "   CORE_PEER_LOCALMSPID: $CORE_PEER_LOCALMSPID"
  echo "   CORE_PEER_ADDRESS: $CORE_PEER_ADDRESS"
  echo "   CORE_PEER_MSPCONFIGPATH: $CORE_PEER_MSPCONFIGPATH"
  echo "   TLS_CA_CERT_PATH is: $TLS_CA_CERT_PATH"
  echo "   CORE_PEER_TLS_CERT_FILE: $CORE_PEER_TLS_CERT_FILE"
  echo "   CORE_PEER_TLS_KEY_FILE: $CORE_PEER_TLS_KEY_FILE"
  echo "   CORE_PEER_TLS_ROOTCERT_FILE: $CORE_PEER_TLS_ROOTCERT_FILE"

  mkdir "$DIR_NAME" && cd "$DIR_NAME"

  peer channel fetch newest -c "\${CHANNEL_NAME}" --orderer "\${ORDERER_URL}" --tls --cafile "$TLS_CA_CERT_PATH"
  peer channel join -b "\${CHANNEL_NAME}"_newest.block --tls --cafile "$TLS_CA_CERT_PATH"

  cd .. && rm -rf "$DIR_NAME"
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/snapshot-scripts.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

__getOrdererAndPeerNodes() {
  echo "
      orderer0.group1.orderer.example.com
      orderer1.group1.orderer.example.com
      orderer2.group1.orderer.example.com
      orderer3.group1.orderer.example.com
      peer0.org1.example.com
      peer1.org1.example.com
  "
}

__getCASQLiteNodes() {
  echo "
      ca.orderer.example.com
      ca.org1.example.com
  "
}

__getCAPostgresNodes() {
  echo "
  "
}

__createSnapshot() {
  cd "$FABLO_NETWORK_ROOT/.."
  backup_dir="\${1:-"snapshot-$(date -u +"%Y%m%d%H%M%S")"}"

  if [ -d "$backup_dir" ] && [ "$(ls -A "$backup_dir")" ]; then
    echo "Error: Directory '$backup_dir' already exists and is not empty!"
    exit 1
  fi

  mkdir -p "$backup_dir"
  cp -R ./fablo-target "$backup_dir/"

  for node in $(__getCASQLiteNodes); do
    echo "Saving state of $node..."
    mkdir -p "$backup_dir/$node"
    docker cp "$node:/etc/hyperledger/fabric-ca-server/fabric-ca-server.db" "$backup_dir/$node/fabric-ca-server.db"
  done

  for node in $(__getCAPostgresNodes); do
    echo "Saving state of $node..."
    mkdir -p "$backup_dir/$node/pg-data"
    docker exec "$node" pg_dump -c --if-exists -U postgres fabriccaserver >"$backup_dir/$node/fabriccaserver.sql"
  done

  for node in $(__getOrdererAndPeerNodes); do
    echo "Saving state of $node..."
    docker cp "$node:/var/hyperledger/production/" "$backup_dir/$node/"
  done
}

__cloneSnapshot() {
  cd "$FABLO_NETWORK_ROOT/.."
  target_dir="$1"
  hook_cmd="$2"

  if [ -d "$target_dir/fablo-target" ]; then
    echo "Error: Directory '$target_dir/fablo-target' already exists! Execute 'fablo prune' to remove the current network."
    exit 1
  fi

  cp -R ./fablo-target "$target_dir/fablo-target"

  if [ -n "$hook_cmd" ]; then
    echo "Executing pre-restore hook: '$hook_cmd'"
    (cd "$target_dir" && eval "$hook_cmd")
  fi

  (cd "$target_dir/fablo-target/fabric-docker" && docker compose up --no-start)

  for node in $(__getCASQLiteNodes); do
    echo "Restoring $node..."
    if [ ! -d "$node" ]; then
      echo "Warning: Cannot restore '$node', directory does not exist!"
    else
      docker cp "./$node/fabric-ca-server.db" "$node:/etc/hyperledger/fabric-ca-server/fabric-ca-server.db"
    fi
  done

  for node in $(__getCAPostgresNodes); do
    echo "Restoring $node..."
    if [ ! -d "$node" ]; then
      echo "Warning: Cannot restore '$node', directory does not exist!"
    else
      docker cp "./$node/fabriccaserver.sql" "$node:/docker-entrypoint-initdb.d/fabriccaserver.sql"
    fi
  done

  for node in $(__getOrdererAndPeerNodes); do
    echo "Restoring $node..."
    if [ ! -d "$node" ]; then
      echo "Warning: Cannot restore '$node', directory does not exist!"
    else
      docker cp "./$node/" "$node:/var/hyperledger/production/"
    fi
  done
}

createSnapshot() {
  (set -eu && __createSnapshot "$1")
}

cloneSnapshot() {
  (set -eu && __cloneSnapshot "$1" "$2")
}
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/hooks/post-generate.sh from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
"#!/usr/bin/env bash

# The code from this file was called after Fablo generated Hyperledger Fabric configuration
echo "Executing post-generate hook"
"
`;

exports[`samples/fablo-config-hlf3-bft-1orgs-1chaincode.json should create proper files from samples/fablo-config-hlf3-bft-1orgs-1chaincode.json 1`] = `
[
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/.gitignore",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/configtx.yaml",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/connection-profiles/connection-profile-orderer.json",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/connection-profiles/connection-profile-orderer.yaml",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/connection-profiles/connection-profile-org1.json",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/connection-profiles/connection-profile-org1.yaml",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/crypto-config-orderer.yaml",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/crypto-config-org1.yaml",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/explorer/config-global.json",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/fabric-ca-server-config/orderer.example.com/fabric-ca-server-config.yaml",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-config/fabric-ca-server-config/org1.example.com/fabric-ca-server-config.yaml",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/.env",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/chaincode-scripts.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/channel-query-scripts.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/commands-generated.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/docker-compose.yaml",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/base-functions.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/base-help.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/chaincode-functions.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/channel-query-functions.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/scripts/cli/channel_fns.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/fabric-docker/snapshot-scripts.sh",
  "e2e/__tmp__/samples/fablo-config-hlf3-bft-1orgs-1chaincode.json.tmpdir/fablo-target/hooks/post-generate.sh",
]
`;