README.access.md

OpenWrt Access

• no root password
• wifi ap mode enabled - no password
• lan -> usb0 + wlan0 (usb net + wifi AP) in bridge mode
• wan -> eth0 (dhcp)
• serial console enabled -> ttyAML0
• hdmi output -> tty0
• web interface http://openwrt-khadas.local
• web interface http://172.23.0.1.local
• ssh [email protected] -p 22
• ssh [email protected] -p 22

LAN ip resolve to local openwrt hosts

172.23.0.1 openwrt-khadas.local

mDNS

• openwrt-khadas.local
• OpenWrt._ssh._tcp.local
• OpenWrt._http._tcp.local

NOTES

• blink led mode started if openwrt was successful loaded
• setup root password and wifi password at fist after installation!
• usb net connection enabled by default in bridge mode with LAN
• if vim device connected by usb cable to your pc u can have network access to LAN via usb-net without any extra configuration