Unable to see the home arrow

[mldmld68]

Hello,

Under Inav 7.1.2, I have a Mateksys F405 Wing v2 and a GPS.

Unfortunately, I'm unable to see the home arrow. Instead I keep seing a checkred flag during flights.
What is the meaning of this flag ?
How to get the home arrow ?

I tried to find info in the doc but infortunately I did not find something with theses keywords.
I used the default font

During the flight, I can see the Latitude and Longitude numbers changing so the GPS is up and running.

Joined, the view and the OSD setup showing the home arrow at the bottom and the dump of the configuration

Thanks
<img width="436" height="357" alt="inav config" src="ht

tps://github.com/user-attachments/assets/de8d0dc8-765b-4ddd-929c-79772fa0878d" />
inav712-dump.txt

[mldmld68]

[MrD-RC]

The chequered flag means you are at the home point.

In the CLI do get inav_reset_home. Is should be set to FIRST_ARM. If it isn't, set it to that.

Do you have distance to home on your OSD? It would be interesting to know if that is changing too.

[mldmld68]

In the joined file inav712-dump.txt one can read
set inav_reset_home = FIRST_ARM

Yes I have the distance to home.
In the first screenshot, one may read 32 meters from home.

Here is another screenshot where I'm 363 meters from home, I still see the chequered flag.

Thanks

[sensei-hacker]

It wouldn't hurt to run the font update just to be sure it really is exactly the right font for that specific version of INAV.

[mldmld68]

I uploaded the bold font.
I armed, then I walked with the plane in the hands up to 20 meters around, but it keep displaying the flag, no home arrow. The GPS coordonates were changing. Is 20 meters enough ?

[mldmld68]

Fixed in Inav 9.0.0.
I also moved the GPS/Compas 5 cm away from the power wires.