MCO CO2 Monitor - CO2 sensor missing

[evrad91]

Hi!

I have MCO CO2 Monitor which works perfect in Fibaro app and as a standalone monitor, but I have the following issues in HomeKit app:

1. I only have temperature and humidity sensors in HomeKit, so CO2 is competely missing.
2. I am not able to group the sensors, which would be very convinient as they all come from a single device.

Is it possible to do something about the points above?

Thanks in advance!

[evrad91]

Here is response:

{
"id": 11,
"name": "CO2",
"roomID": 219,
"type": "com.fibaro.multilevelSensor",
"baseType": "com.fibaro.sensor",
"enabled": true,
"visible": true,
"isPlugin": false,
"parentId": 7,
"remoteGatewayId": 0,
"interfaces": [
"zwave"
],
"properties": {
"parameters": [],
"pollingTimeSec": 0,
"zwaveCompany": "McoHome Technology Co., Ltd",
"zwaveInfo": "5,3,67",
"zwaveVersion": "2.0",
"categories": "["climate"]",
"configured": true,
"dead": "false",
"deadReason": "",
"deviceControlType": "0",
"deviceIcon": "47",
"emailNotificationID": "0",
"emailNotificationType": "0",
"endPointId": "0",
"log": "",
"logTemp": "",
"manufacturer": "",
"markAsDead": "true",
"model": "",
"nodeId": "3",
"parametersTemplate": "0",
"productInfo": "1,95,9,1,49,2,2,0",
"pushNotificationID": "0",
"pushNotificationType": "0",
"remoteGatewayId": "0",
"saveLogs": "true",
"serialNumber": "",
"smsNotificationID": "0",
"smsNotificationType": "0",
"unit": "ppm",
"useTemplate": "false",
"userDescription": "",
"value": "571.00"
},
"actions": {
"reconfigure": 0
},
"created": 1572892149,
"modified": 1572892149,
"sortOrder": 9
}

[ilcato]

@evrad91, CO2 sensors are not implemented in the plugin. Additionally this specific sensor describes itself as a "com.fibaro.multilevelSensor" that doesn't allow to understand that it is measuring CO2.

[evrad91]

@ilcato Hi! Thanks for the reply!
Got it.
Then I have follow up questions:

1. Do you plan to implement CO2 sensors?
2. Is there any way to change "com.fibaro.multilevelSensor" to the right type of sensor (carbon monoxide) in HC2 or the only way is to contact manufacturer? Does it have to be"com.fibaro.carbonmonoxideSensor"
3. Is there any way to group temp and humidity sensors as they come from a single device?

[evrad91]

@ilcato Here is the response of the parent device:
{
"id": 7,
"name": "7",
"roomID": 0,
"type": "com.fibaro.zwaveDevice",
"baseType": "com.fibaro.device",
"enabled": true,
"visible": false,
"isPlugin": false,
"parentId": 1,
"remoteGatewayId": 0,
"interfaces": [
"zwave",
"zwaveAssociation",
"zwaveConfiguration",
"zwaveSlaveRouting"
],
"properties": {
"associations": "[{"endPointId":0,"groups":[{"groupInfo":{"commands":[],"name":"","profile":""},"id":1,"singleChannel":{"max":5,"set":[1],"view":[1]}},{"groupInfo":{"commands":[],"name":"","profile":""},"id":2,"singleChannel":{"max":1,"set":[1],"view":[1]}}]}]",
"categories": "["other"]",
"configured": true,
"dead": "false",
"deadReason": "",
"deviceControlType": "0",
"deviceIcon": "28",
"deviceSpecificData": "",
"deviceSpecificIdType": "",
"deviceState": "Configured",
"emailNotificationID": "0",
"emailNotificationType": "0",
"endPointId": "0",
"lastWorkingRoute": "[1]",
"lastWorkingRouteRequestStatus": "ok",
"lastWorkingRouteRequestTimestamp": "0",
"lastWorkingRouteResponseTimestamp": "1572892157",
"log": "",
"logTemp": "",
"manufacturer": "",
"markAsDead": "true",
"model": "",
"neighborList": "[1,13,16,19,22,26,29,55,74,79]",
"neighborListRequestStatus": "ok",
"neighborListRequestTimestamp": "0",
"neighborListResponseTimestamp": "1572892157",
"nodeId": "3",
"parameters": [],
"parametersTemplate": "0",
"pollingTimeSec": 0,
"productInfo": "1,95,9,1,49,2,2,0",
"pushNotificationID": "0",
"pushNotificationType": "0",
"remoteGatewayId": "0",
"saveLogs": "true",
"serialNumber": "",
"smsNotificationID": "0",
"smsNotificationType": "0",
"useTemplate": "true",
"userDescription": "",
"zwaveCompany": "McoHome Technology Co., Ltd",
"zwaveInfo": "5,3,67",
"zwaveSoftwareVersion": "{}",
"zwaveVersion": "2.0"
},
"actions": {
"getLastWorkingRoute": 0,
"getNeighborList": 0,
"getParameter": 1,
"reconfigure": 0,
"requestNodeNeighborUpdate": 0,
"setParameter": 2
},
"created": 1572892149,
"modified": 1572892149,
"sortOrder": 5
}

[ilcato]

Not for now.