test/module: cut MIPv6 test log size by restricting cmdenv output to modules under test

The MIPv6 tests assert on specific module log lines (mipv6, the ping/tcp
app, and for tcp_handover the tcp module) but ran with full per-event
logging of every module (radio, mac, mgmt, ipv6, ...), producing enormous
test.out files (roaming_two_handovers: 919 MB; family total ~3.5 GB) that
fill CI disk and slow the %contains checks.

Keep cmdenv-express-mode=false (these tests need EV output for their
eventlog-free stdout assertions), but silence all modules via
**.cmdenv-log-level=off and re-enable only the modules under test:
**.mipv6 and **.app[*] (plus its submodule subtree, and **.tcp for
tcp_handover so its 'not reset' %not-contains stays meaningful). Also
turn off cmdenv-event-banners (not asserted). Family test.out total:
~3.5 GB -> 4.6 MB; all 11 tests still pass.

Author: avarga

tests/module/MIPv6_binding_refresh.test

@@ -12,6 +12,10 @@ re-initiate Return Routability.
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 65s

tests/module/MIPv6_early_route_optimization.test

@@ -14,6 +14,10 @@ trigger immediately upon receiving tunneled traffic from the CN.
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 60s

tests/module/MIPv6_handover.test

@@ -11,6 +11,10 @@ that the MN initiates the MIPv6 protocol and the HA accepts the binding.
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 60s

tests/module/MIPv6_movement_detection.test

@@ -14,6 +14,10 @@ possible via the Router Solicitation sent on L2 (re)association.
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 60s

tests/module/MIPv6_return_home.test

@@ -12,6 +12,10 @@ simulation time.
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 55s

tests/module/MIPv6_return_home_route_optimization.test

@@ -20,6 +20,10 @@ sequence number that only arrives once route optimization has been torn down).
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 60s

tests/module/MIPv6_roaming_two_handovers.test

@@ -18,6 +18,10 @@ correctly redone for the second care-of address.
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6RoamingNetwork
 sim-time-limit = 90s

tests/module/MIPv6_route_optimization.test

@@ -12,6 +12,10 @@ optimization.
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 90s

tests/module/MIPv6_route_optimization_two_cns.test

@@ -12,6 +12,10 @@ The Mipv6Network test network is reused with total_cn=2.
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 90s

tests/module/MIPv6_tcp_handover.test

@@ -12,6 +12,12 @@ The Mipv6Network test network is reused (1 MN, 1 CN).
 %inifile: omnetpp.ini
 [General]
 record-vector-results = false
+**.mipv6.cmdenv-log-level = trace
+**.app[*].cmdenv-log-level = trace
+**.app[*].**.cmdenv-log-level = trace
+**.tcp.cmdenv-log-level = trace
+**.cmdenv-log-level = off
+cmdenv-event-banners = false
 ned-path = .;../../../../src;../../lib
 network = inet.test.moduletest.lib.Mipv6Network
 sim-time-limit = 55s