Intel nuc stacked with vs1a setup

[cz1974]

Hi all,
I'm trying to test the code with a system based on 2 Nucs with i225 cards. When I launch

./run.sh i225 enp88s0 vs1a setup

I got:
Run.sh selected: vs1a
/var/log folder for logging exists.
combined unmodified, ignoring
no channel parameters changed.
current values: rx 0 tx 0 other 1 combined 4
Mapping socket priority N to VLAN priority N for enp88s0
Setting IRQ affinity based on /home/nuc01/iotg_tsn_ref_sw/shell/../common/irq_affinity_4c_4TxRx.map
Echo-ing 0x01 > /proc/irq/157/smp_affinity --> enp88s0:TxRx-0
Echo-ing 0x04 > /proc/irq/159/smp_affinity --> enp88s0:TxRx-2
Echo-ing 0x08 > /proc/irq/160/smp_affinity --> enp88s0:TxRx-3
Running PTP4L & PHC2SYS
Using gPTP_i225-1G.cfg
Run: tc qdisc replace dev enp88s0 parent root handle 100 taprio num_tc 4 map 3 1 0 2 3 3 3 3 3 3 3 3 3 3 3 3 queues 1@0 1@1 1@2 1@3 base-time 1681459807475613954 sched-entry S 0F 1000000 flags 0x2
Run: tc qdisc replace dev enp88s0 parent 100:3 etf clockid CLOCK_TAI delta 700000 offload
/home/nuc01/iotg_tsn_ref_sw/shell/helpers.sh: line 299: 1694 Killed $CMD

And then the machine cannot be used and it needs a hardware reset.
The station B, an identical nuc, proceeds correctly until the end of the setup script.

Thank you in advance
Claudio Zunino

[AzuraTarmiziIntel]

Please check what is being executed at line 299. Echo the command and run exit right after. You can try to execute the command manually in a shell .

[cz1974]

Please check what is being executed at line 299. Echo the command and run exit right after. You can try to execute the command manually in a shell .

There is the call to setup_etf()
I tested also another simpler configuration and the problem is the flag 0x2 and etf together. At least with kernel 5.19.

Thank you
Claudio