New translations en_us.json (Chinese Traditional)

Author: isXander

src/main/resources/assets/controlify/lang/zh_tw.json

@@ -1,11 +1,9 @@
 {
-  "controlify.placeholder": "%1$s",
   "controlify.gui.carousel.title": "控制器",
   "controlify.gui.carousel.no_controllers": "沒有控制器連接。",
   "controlify.gui.carousel.entry.settings": "設定",
   "controlify.gui.carousel.entry.use": "使用",
   "controlify.gui.carousel.entry.in_use": "正在使用",
-  "controlify.gui.carousel.entry.keyboard_mouse": "Keyboard & Mouse",
   "controlify.gui.carousel.controller_not_detected_btn": "沒有偵測到控制器嗎？",
   "controlify.gui.carousel.controller_not_detected_btn.tooltip": "前往 wiki 查找你的控制器無法運作的疑難排解資訊。",
   "controlify.gui.carousel.donate": "贊助！",
@@ -52,7 +50,6 @@
   "controlify.gui.use_enhanced_steam_deck_driver.tooltip": "如果啟用此選項，Controlify 將會使用增強型 Steam Deck 驅動程式來提升相容性和效能。此功能目前仍處於實驗階段，可能會有錯誤。此驅動程式需要在您的 Steam Deck 上安裝 Decky Loader。",
   "controlify.gui.copy_debug_dump": "將除錯傾印複製到剪貼簿",
   "controlify.gui.copy_debug_dump.tooltip": "將 Controlify 除錯傾印複製到你的剪貼簿。如果你需要支援，可能會被要求使用它。",
-  "controlify.gui.not_supported": "Your controller may not support %s.",
   "controlify.gui.new_options": "本次更新的新功能",
   "controlify.gui.new_options.tooltip": "展示最新更新的新功能",
   "controlify.gui.new_options.label": "這個選項是新的！",
@@ -71,8 +68,6 @@
   "controlify.gui.invert_vertical_look.tooltip": "反轉視角 Y 軸。例如：上變成下，反之亦然。",
   "controlify.gui.reduce_aiming_sensitivity": "降低瞄準靈敏度",
   "controlify.gui.reduce_aiming_sensitivity.tooltip": "瞄準時降低靈敏度。",
-  "controlify.gui.look_input_curve": "Look Input Curve",
-  "controlify.gui.look_input_curve.tooltip": "Adjusts how the look input from the joystick is interpreted. A linear curve means the look speed is directly proportional to how far the joystick is pushed. A more exponential curve means small movements of the joystick result in smaller look speeds, and larger movements result in much larger look speeds.",
   "controlify.gui.config.group.controls": "控制",
   "controlify.gui.toggle_sneak": "潛行",
   "controlify.gui.toggle_sneak.tooltip": "潛行按鈕的行為。",
@@ -89,8 +84,6 @@
   "controlify.gui.show_ingame_guide.tooltip": "在遊戲內顯示一個 HUD，顯示你可以使用控制器按鈕執行的操作。",
   "controlify.gui.ingame_button_guide_position": "遊戲中按鈕指南位置",
   "controlify.gui.ingame_button_guide_position.tooltip": "遊戲中按鈕指南的位置。",
-  "controlify.gui.guide_verbosity": "Guide Verbosity",
-  "controlify.gui.guide_verbosity.tooltip": "How much information is shown in button guides.",
   "controlify.gui.show_screen_guide": "顯示畫面按鈕指南",
   "controlify.gui.show_screen_guide.tooltip": "在介面中顯示各種助手，以幫助使用控制器輸入。",
   "controlify.gui.show_keyboard": "顯示螢幕鍵盤",
@@ -161,7 +154,6 @@
   "controlify.gui.test_vibration": "測試震動",
   "controlify.gui.test_vibration.tooltip": "測試你的控制器震動效果。",
   "controlify.gui.show_keyboard.off": "關閉",
-  "controlify.gui.show_keyboard.controlify": "Controlify",
   "controlify.gui.show_keyboard.system": "系統",
   "controlify.deadzone_group.controlify.left_stick": "左搖桿",
   "controlify.deadzone_group.controlify.right_stick": "右搖桿",
@@ -216,7 +208,6 @@
   "controlify.toast.faulty_input.title": "停用控制器",
   "controlify.toast.faulty_input.description": "發現控制器與鍵盤和滑鼠發生衝突，已被停用。增加死區值或檢查搖桿映射以修復。",
   "controlify.toast.low_battery.title": "低電量",
-  "controlify.toast.low_battery.message": "Your controller '%s' is on %s. Please charge it soon.",
   "controlify.toast.setup_in_config.title": "找到控制器！",
   "controlify.toast.setup_in_config.description": "若要使用 Controlify，請前往 %s -> %s -> %s。",
   "controlify.toast.reach_around_disallowed.title": "禁止繞過放置",
@@ -234,9 +225,6 @@
   "controlify.downloading_sdl.title": "正在下載 SDL",
   "controlify.downloading_sdl.info": "正在下載 Controlify 使用的原生程式庫的更新。你看到這個是因為你選擇在首次啟動時下載原生程式庫。\n這只會花費幾秒鐘。",
   "controlify.controller_theme.default": "預設",
-  "controlify.controller_theme.xbox_one": "Xbox",
-  "controlify.controller_theme.dualshock4": "PS4",
-  "controlify.controller_theme.steam_deck": "Steam Deck",
   "controlify.bluetooth_warning.title": "控制器已透過藍牙連線",
   "controlify.bluetooth_warning.desc": "部分控制器透過藍牙連線時可能會缺少部分功能。例如 DualSense 的 HD 震動。如果你認為控制器缺少某項功能，請嘗試使用 USB 連接，然後再回報問題。",
   "controlify.bluetooth_warning.dont_show": "不再顯示",
@@ -321,10 +309,6 @@
   "controlify.binding.controlify.gui_navi_up": "介面導航上",
   "controlify.binding.controlify.gui_navi_left": "介面導航左",
   "controlify.binding.controlify.gui_navi_right": "介面導航右",
-  "controlify.binding.controlify.gui_secondary_navi_down": "GUI Secondary Navi Down",
-  "controlify.binding.controlify.gui_secondary_navi_up": "GUI Secondary Navi Up",
-  "controlify.binding.controlify.gui_secondary_navi_left": "GUI Secondary Navi Left",
-  "controlify.binding.controlify.gui_secondary_navi_right": "GUI Secondary Navi Right",
   "controlify.binding.controlify.clear_binding": "清除綁定",
   "controlify.binding.voicechat.ptt_hold": "按鍵發話（按住）",
   "controlify.binding.voicechat.ptt_toggle": "按鍵發話（切換）",
@@ -414,7 +398,6 @@
   "controlify.input.controlify.dualshock4.controlify.button/touchpad_1": "觸控板點選",
   "controlify.binding_category.gui": "介面",
   "controlify.binding_category.vmouse": "虛擬滑鼠",
-  "controlify.binding_category.debug": "Debug",
   "controlify.custom_binding.vanilla_description": "由 Fabric API 自動生成的按鍵綁定。",
   "controlify.guide.ingame.inventory": "開啟物品欄",
   "controlify.guide.ingame.swim_up": "向上游泳",
@@ -482,8 +465,6 @@
   "controlify.battery_level.high": "高",
   "controlify.battery_level.full": "滿",
   "controlify.guide_verbosity.full": "滿",
-  "controlify.guide_verbosity.reduced": "Reduced",
-  "controlify.guide_verbosity.minimal": "Minimal",
   "controlify.command.vibratecontroller.static.single": "震動一個玩家的控制器。",
   "controlify.command.vibratecontroller.static.multiple": "震動 %s 個玩家的控制器。",
   "controlify.command.vibratecontroller.pos.single": "在 %s, %s, %s 位置震動一個玩家的控制器。",
@@ -511,11 +492,6 @@
   "controlify.gui.mapping_maker.instruction.dpad_left": "「方向鍵左」",
   "controlify.gui.mapping_maker.instruction.dpad_down": "「方向鍵下」",
   "controlify.gui.mapping_maker.instruction.dpad_right": "「方向鍵右」",
-  "controlify.gui.mapping_maker.instruction.axis": "Move %s to the %s and quickly release it.",
-  "controlify.gui.mapping_maker.instruction.axis_left": "left",
-  "controlify.gui.mapping_maker.instruction.axis_right": "right",
-  "controlify.gui.mapping_maker.instruction.axis_up": "up",
-  "controlify.gui.mapping_maker.instruction.axis_down": "down",
   "controlify.gui.mapping_maker.instruction.left_stick": "「左搖桿」",
   "controlify.gui.mapping_maker.instruction.right_stick": "「右搖桿」",
   "controlify.gui.mapping_maker.instruction.left_trigger": "按下 LT 鍵然後快速放開。",
@@ -541,28 +517,5 @@
   "controlify.joystick_mapping.unmapped.axis_direction.negative": "（負向）",
   "controlify.joystick_mapping.unmapped.axis_direction.positive": "（正向）",
   "controlify.extra_pack.legacy_console.name": "舊版主機",
-  "controlify.extra_pack.legacy_console.desc": "Controlify - 設定預設綁定/圖示。",
-  "controlify.keyboard.special.shift": "Shift",
-  "controlify.keyboard.special.shift_lock": "Shift Lock",
-  "controlify.keyboard.special.enter": "Enter",
-  "controlify.keyboard.special.backspace": "Del",
-  "controlify.keyboard.special.tab": "Tab",
-  "controlify.keyboard.special.left_arrow": "←",
-  "controlify.keyboard.special.right_arrow": "→",
-  "controlify.keyboard.special.up_arrow": "↑",
-  "controlify.keyboard.special.down_arrow": "↓",
-  "controlify.keyboard.special.copy_all": "Copy All",
-  "controlify.keyboard.special.paste": "Paste",
-  "controlify.keyboard.special.previous_layout": "Previous Layout",
-  "controlify.tutorial.look.description": "Use your mouse or controller to turn",
-  "controlify.hint.keyboard_cursor_movement": "Use %s and %s to move the text cursor",
-  "controlify.hint.command_suggester": "Use %s and %s to navigate through command suggestions, and %s to select them",
-  "controlify.hint.edit_box_keyboard": "Press %s to open keyboard",
-  "controlify.hint.sign_line_change": "Use %s and %s to change lines",
-  "controlify.input_curves.linear": "Linear",
-  "controlify.input_curves.gentle": "Gentle (exp 1.5)",
-  "controlify.input_curves.standard": "Standard (exp 2.0)",
-  "controlify.input_curves.strong": "Strong (exp 2.5)",
-  "controlify.input_curves.precision_cubic": "Cubic (blend 0.5)",
-  "controlify.input_curves.s_curve": "S-Curve"
+  "controlify.extra_pack.legacy_console.desc": "Controlify - 設定預設綁定/圖示。"
 }