Solar Smart MicroInverter MaySun600

[JanusHL]

Hi community,
First of all give thanks to the developer of this great application.

Recently I've purchased This microinverter that uses SmartLife- Tuya APP and following the instruccions I've extracted de DPS values in order to get data from it.

If could be interesting to add this new device to the devices DPS list , here are those values:

Maysun600 MicroInverter
Version 3.3

dps: {
       "2":  Cumulative total energy
       "10": Current power (/100)
       "15": Maysun600
       "16": Serial number
       "102": DC current (/100)
       "103": DC Voltage (/10)
       "104": AC Voltage (/10)
       "105": AC Current (/100)
       "108": Percent control
       }

best regards
JanusHL

[pgolos21]

Hello I know this is a old post but does this grid tie inverter .have the option to control the output power? Dps 108. Is it just read or read and write? Thanks you.

[JanusHL]

I can't say how this parameters acts in the microinverter. Mine has a value of 80:
{ "code": "percent_control", "value": 80 }

and parameter itself is:

"108": { "code": "percent_control", "type": "Integer", "values": { "unit": "%", "min": 1, "max": 100, "scale": 0, "step": 1 }

[pgolos21]

Does your inverter only out put 480watts? And does the tuya app have a option to adjust it? Thank you so much.

[JanusHL]

I have the microinverter not conected now. But normally it did'nt arrive to the max output power.
The APP does not let you change this parameter, but you can try it using:

`
d=tinytuya.OutletDevice(MICROID, MICROIP, MICROKEY)
d.set_version(version)
d.set_socketTimeout = 2
d.set_socketRetryLimit = 2

d.set_value(108, newvalue)

`
After it you can read again dps values to see the change...