DSP overload / xruns when using neural mode

[monniaux]

If I turn neural mode on, the DSP quickly overloads, leading to xruns. Is this to be expected?

[jatinchowdhury18]

On my system, the DSP load is roughly the same between the Neural and Traditional modes, but there could be significant variation depending on what processor you're running on (I'm testing on a 3.2 GHz Intel Core i7).

If you're building from source, you may want to try using the following commands:

cmake -Bbuild -DCMAKE_BUILD_TYPE=Release
cmake --build build/ --config Release