Some info from a source #191
Replies: 4 comments
-
|
I'm using SE terminology and will post my data in accordance with it. There are two types of packets: PacketA and PacketB type. Barker field for fist one is 12345678, second 12345679 in hex format. |
Beta Was this translation helpful? Give feedback.
-
|
Here is how Tx packet build: |
Beta Was this translation helpful? Give feedback.
-
|
Return packet (OpCode replaced by ReturnCode) with RC = 0005 is Telemetry packet. Next two bytes is Telemetry Type as ushort: |
Beta Was this translation helpful? Give feedback.
-
|
My quick glance of semonitor parsing telemetry packets [OP/OP_S/Inv1PH/Inv3PH/etc] seems to me has some different things from my knowledge. |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Last years I spent a lot of time to create my own monitoring program using C#, easyMODBUS lib and source code from old Windows program. Recently I discovered the project and find it's very useful. Same time I got differences in processing Telemetry packets from my SE3000 inverter via RS232 port. Telemetry packets spilling off by the inverter after each PROT_CMD_POLESTAR_CONFTOOL_START request send with 300 sec interval. Shorting it have no effect. Each request accompanied by a response packet with PROT_RESP_ACK/NACK/ERR response code.
I think it will be beneficial to all enthusiasts bring some additional info from my experience.
Beta Was this translation helpful? Give feedback.
All reactions