Singlephase/Split-Phase Data Per Line

[gutowscr471]

Is there anyway to see the data on ports A and B via VueGraf. I have split phase electric in the U.S and would like to see if my Port A and Port B readings are near balanced for my loads. The only way I can see this now is data download from Emporia (sample below).

[jertel]

Does your reference to "ports A and B" represent the two panel main clamps? If so Vuegraf shows the combined usage and does not have the individual metrics for each clamp.

[gutowscr471]

Correct, A and B are my two main panel clamps. Was hoping to see what each clamp is reading over time (gives a sense of how unbalanced each leg is of your panel for off-grid solar sizing). For example, a 120v microwave and coffee maker on the same leg could be a 30amp (3600w) imbalance will would cause a fault in an off-grid solar inverter.

[jertel]

Vuegraf pulls usage data but this thread on the underlying API lib suggest it might be possible, if you wanted to write your own Python app: magico13/PyEmVue#22.

A more recent thread with your same question was left unanswered, back in December: magico13/PyEmVue#44