Just finished and love Genmon Thanks Mr. Yates

[Buythepound]

I have a 2012 Generac 17kw generator with Nexus Ver. D I used a Pi Zero 2 WH and used the PHAT from Pintsize.me running Genmon 2.0. First time attempting something like this but between this site and a lot of help from Chatgbt I have pretty fine tuned system. I installed a logging program to help preserve my SD card, Talescale with magic DNS to access anywhere, weekly reboots to ensure I don’t lose WiFi plus email and text notifications. Had one issue were I lost WiFi access but ended up being a Mac issue were I lost DNS, now with Magic DNS it’s covered. Thanks Mr. Yates and company this was a great project

[jgyates]

@Buythepound

Thanks for the kind feedback. I am glad everything is working good for you.

[Mykal451]

Nice install, congrats !! You'll come to hate the screwed on cover. That's what I started with. These are just as easy to install and offer instant access, I drill a very small weep hole, have never had water / moisture issues, grease up the gasket with some kind of silicone grease, they can dry out and crack or stick and tear.

-mp

https://www.amazon.com/dp/B07PZT8FWD?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

[FlaMike]

The amazon link you provide goes to a 404 error. Just getting ready to get an enclosure for my Pi with a PintSizeMe hat. Could you kindly provide information about the enclosure you pictured? i.e., manufacturer, size, etc. so I may try to locate it?

Thank you!

[skipfire]

@FlaMike copy the text and use that instead of clicking. I'm going to try to repaste the link...
https://www.amazon.com/dp/B07PZT8FWD?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

[jgyates]

This one should work too

https://www.amazon.com/YETLEBOX-Waterproof-Electrical-Stainless-Enclosure/dp/B0BZHGCBTH/ref=pd_day0_d_sccl_1_2/131-6873602-3204546?pd_rd_w=B47wZ&content-id=amzn1.sym.de286d99-05f6-43bf-9d9c-b57de9652232&pf_rd_p=de286d99-05f6-43bf-9d9c-b57de9652232&pf_rd_r=MNNJEFWY091FDE8CMAED&pd_rd_wg=a7MCW&pd_rd_r=afe05fff-3127-46e4-80fc-1b4045af88d5&pd_rd_i=B0BZHGCBTH&th=1

[Buythepound]

I guess time will tell, I also drilled 3 3/16" holes in the bottom, I like the idea of being able to see the board easily, and to see if anything is going on at a glance when walking by it rather then opening it,