I wanted to print the mid layers using a 3D printing service, but they pointed out that there's a particular area where the gap is just 0.25mm, and they recommend a minimum gap of 0.8mm as otherwise there's a risk it would break. The issue seems to be that the USB-C port gets too near the bottom "lip".
I wanted to print the mid layers using a 3D printing service, but they pointed out that there's a particular area where the gap is just 0.25mm, and they recommend a minimum gap of 0.8mm as otherwise there's a risk it would break. The issue seems to be that the USB-C port gets too near the bottom "lip".
