Boot loop after flashing 4.2.3

[qu4cks4lb3r]

Hi,

I was using Glow with an ESP32 for years now and decided to install the latest version 4.2.3 today. I used the web-loader via Chrome. Installing the firmware and setting up the wifi worked without any problems. Also I could access the web-ui and configure the esp.

However, as soon as I restart the ESP or disconnect it from power, the ESP is stuck in a boot-loop.

13:01:35][I][logger:156]: Log initialized
[13:01:35][C][status_led:014]: Setting up Status LED...
[13:01:35][C][safe_mode:079]: There have been 9 suspected unsuccessful boot attempts
[13:01:35][D][esp32.preferences:114]: Saving 1 preferences to flash...
[13:01:35][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[13:01:35][I][app:029]: Running through setup()...
[13:01:35][D][number:012]: 'Puls rate - imp/kWh': Sending state 1000.000000
[13:01:35][D][number:012]: 'Reset Value - Total Energy kWh': Sending state 0.000000
[13:01:35][C][light:035]: Setting up light 'Red'...
[13:01:35][D][light:036]: 'Red' Setting:
[13:01:35][D][light:041]:   Color mode: 
[13:01:35][D][text_sensor:064]: 'Home Assistant Glow - ESPHome Version': Sending state '2024.10.2'
[13:01:35][D][sensor:094]: 'Home Assistant Glow - Daily Energy': Sending state 0.00000 kWh with 3 decimals of accuracy
[13:01:35][C][wifi:048]: Setting up WiFi...
[13:01:35][C][wifi:061]: Starting WiFi...
[13:01:35][C][wifi:062]:   Local MAC: EC:62:60:84:2B:58
[13:01:35][D][wifi:074]: Loaded saved wifi settings: New York
[13:01:35][D][wifi:482]: Starting scan...
[13:01:35][D][text_sensor:064]: 'Glow - Installed version': Sending state '4.2.3'
[13:01:35][D][esp32.preferences:114]: Saving 1 preferences to flash...
[13:01:35][D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed
[13:01:35][W][component:157]: Component wifi set Warning flag: scanning for networks
[13:01:41][D][wifi:497]: Found networks:
[13:01:41][I][wifi:541]: - 'New York' [redacted]▂▄▆█
[13:01:41][D][wifi:542]:     Channel: 6
[13:01:41][D][wifi:543]:     RSSI: -59 dB
[13:01:41][I][wifi:541]: - 'New York' [redacted]▂▄▆█
[13:01:41][D][wifi:542]:     Channel: 1
[13:01:41][D][wifi:543]:     RSSI: -85 dB
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][D][wifi:546]: - [redacted] [redacted]▂▄▆█
[13:01:41][I][wifi:313]: WiFi Connecting to 'New York'...
[13:01:42][I][wifi:617]: WiFi Connected!
[13:01:42][C][wifi:428]:   Local MAC: EC:62:60:84:2B:58
[13:01:42][C][wifi:433]:   SSID: [redacted]
[13:01:42][C][wifi:436]:   IP Address: 192.168.1.6
[13:01:42][C][wifi:440]:   BSSID: [redacted]
[13:01:42][C][wifi:441]:   Hostname: 'home-assistant-glow-842b58'
[13:01:42][C][wifi:443]:   Signal strength: -60 dB ▂▄▆█
[13:01:42][C][wifi:447]:   Channel: 6
[13:01:42][C][wifi:448]:   Subnet: 255.255.255.0
[13:01:42][C][wifi:449]:   Gateway: 192.168.1.1
[13:01:42][C][wifi:450]:   DNS1: 192.168.1.240
[13:01:42][C][wifi:451]:   DNS2: 0.0.0.0
[13:01:42][D][wifi:626]: Disabling AP...
[13:01:42][C][web_server:100]: Setting up web server...
[13:01:42][C][api:026]: Setting up Home Assistant API server...
[13:01:42][I][app:062]: setup() finished successfully!
[13:01:47]E (24197) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
[13:01:47]E (24197) task_wdt:  - loopTask (CPU 1)
[13:01:47]E (24197) task_wdt: Tasks currently running:
[13:01:47]E (24197) task_wdt: CPU 0: IDLE
[13:01:47]E (24197) task_wdt: CPU 1: IDLE
[13:01:47]E (24197) task_wdt: Aborting.
[13:01:47]
[13:01:47]abort() was called at PC 0x40104d48 on core 0
[13:01:47]
[13:01:47]
[13:01:47]Backtrace:0x400839b1:0x3ffbea2c |<-CORRUPTED
[13:01:47]
[13:01:47]
[13:01:47]
[13:01:47]
[13:01:47]ELF file SHA256: 0000000000000000
[13:01:47]
[13:01:47]Rebooting...
[13:01:47]ets Jun  8 2016 00:22:57
[13:01:47]
[13:01:47]rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
[13:01:47]configsip: 0, SPIWP:0xee
[13:01:47]clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
[13:01:47]mode:DIO, clock div:2
[13:01:47]load:0x3fff0030,len:1184
[13:01:47]load:0x40078000,len:13132
[13:01:47]load:0x40080400,len:3036
[13:01:47]entry 0x400805e4

After some attempts it switches into safe mode which seems to work. Again, after switching back to normal mode after 300 seconds, the ESP returns resetting in the boot-loop.

Any suggestions?