import logging
logging.basicConfig(level=logging.DEBUG)
interface = pyipmi.interfaces.create_interface('ipmitool', interface_type='lan')
connection = pyipmi.create_connection(interface)
connection.target = pyipmi.Target(0x82)
connection.target.set_routing([(0x81,0x20,0),(0x20,0x82,7)])
connection.session.set_session_type_rmcp(ipmi_addr, port=623)
connection.session.set_auth_type_user(ipmi_login, ipmi_passw)
connection.session.set_priv_level("ADMINISTRATOR")
connection.session.establish()
connection.get_device_id()
DEBUG:pyipmi:IPMI Request [GetDeviceIdReq [netfn=6, cmd=1, grp=None]]
DEBUG:pyipmi:Running ipmitool "ipmitool -I lan -H 192.168.100.116 -p 623 -L ADMINISTRATOR -U "pyipmitest" -P "oRd7fQSUv2" -t 0x82 -b 0 -l 0 raw 0x06 0x01 2>&1"
DEBUG:pyipmi:return with rc=2, output was:
b'option -l not recognized\r\nipmitool vdev\r\nusage: ipmitool [options...] <command>\r\nOptions:\r\n -t <addr> Set target IPMB address\r\n -b <channel> Set target channel\r\n -r <rtr> Set target routing (not supported atm)\r\n -h Show this help\r\n -v Be verbose\r\n -V Print version\r\n -I <interface> Set interface (available: rmcp, aardvark, ipmitool, ipmbdev)\r\n -H <host> Set RMCP host\r\n -U <user> Set RMCP user\r\n -L <level> Set RMCP priviledge level\r\n -P <password> Set RMCP password\r\n -o <options> Set interface specific options (name=value, separated\r\n by commas, see below for available options).\r\n\r\nAardvark interface options:\r\n serial=<SN> Serial number of the device\r\n pullups=<on|off> Enable/disable pullups\r\n power=<on|off> Enable/disable target power\r\n fastmode=<on|off> Enable/disable 400kHz I2C bitrate (Default 100kHz)\r\n\r\nIpmitool interface options:\r\n interface_type Set the interface type to be used (lan, lanplus, serial, open)\r\n cipher Set the cipher to be used (0-255)\r\n\r\nIpmbdev interface options:\r\n port=<path> Specify path to Linux IPMB device (/dev/ipmb-0 by default)\r\n\r\nCommands:\r\n raw Send a RAW IPMI request and print response\r\n fru Print built-in FRU and scan SDR for FRU locators\r\n sensor None\r\n sel Print System Event Log (SEL)\r\n sdr Print Sensor Data Repository entries and readings\r\n bmc Management Controller status and global enables\r\n picmg PICMG commands\r\n hpm HPM.1 commands\r\n chassis Get chassis status and set power state\r\n'
Traceback (most recent call last):
File "C:\Users\mark\PycharmProjects\tests\tests\pyipmi-example.py", line 36, in <module>
connection.get_device_id()
~~~~~~~~~~~~~~~~~~~~~~~~^^
File "C:\Users\mark\PycharmProjects\tests\.venv-3.13\Lib\site-packages\pyipmi\bmc.py", line 25, in get_device_id
return DeviceId(self.send_message_with_name('GetDeviceId'))
~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^
File "C:\Users\mark\PycharmProjects\tests\.venv-3.13\Lib\site-packages\pyipmi\__init__.py", line 212, in send_message_with_name
rsp = self.send_message(req)
File "C:\Users\mark\PycharmProjects\tests\.venv-3.13\Lib\site-packages\pyipmi\__init__.py", line 196, in send_message
rsp = self.interface.send_and_receive(req)
File "C:\Users\mark\PycharmProjects\tests\.venv-3.13\Lib\site-packages\pyipmi\interfaces\ipmitool.py", line 178, in send_and_receive
rsp_data = self.send_and_receive_raw(req.target, req.lun, req.netfn,
py3_array_tobytes(req_data))
File "C:\Users\mark\PycharmProjects\tests\.venv-3.13\Lib\site-packages\pyipmi\interfaces\ipmitool.py", line 153, in send_and_receive_raw
cc, rsp = self._parse_output(output)
~~~~~~~~~~~~~~~~~~^^^^^^^^
File "C:\Users\mark\PycharmProjects\tests\.venv-3.13\Lib\site-packages\pyipmi\interfaces\ipmitool.py", line 135, in _parse_output
int(value, 16) for value in hexstr.split(' ')
~~~^^^^^^^^^^^
ValueError: invalid literal for int() with base 16: 'option'
