Wallbow Pulsar Plus almost no information

[an0Nym0us63]

I'm using latest version
Everything is ok, wallbox detected, status are ok but the only value that is updated during charge is the Energy Session

I was hopint to see the realtime power... but every value stays to unknown or 0

I checked the log and i can see only Energy.Active.Import.Register that is collected

"Energy.Active.Import.Register","unit": "Wh","value": "1052613.4"} ]} ],"connectorId": 1,"transactionId": 1761587590}]
2025-10-27 22:41:10.128 INFO (MainThread) [ocpp] Wallbox: send [3,"1843487281",{}]
2025-10-27 22:41:12.177 INFO (MainThread) [ocpp] Wallbox: receive message [2,"806002023","MeterValues",{"meterValue": [{"timestamp": "2025-10-27T21:41:11Z","sampledValue": [{"format": "Raw","location": "Outlet","context": "Sample.Periodic","measurand": "Energy.Active.Import.Register","unit": "Wh","value": "1052616.5"} ]} ],"connectorId": 1,"transactionId": 1761587590}]
2025-10-27 22:41:12.182 INFO (MainThread) [ocpp] Wallbox: send [3,"806002023",{}]
2025-10-27 22:41:14.202 INFO (MainThread) [ocpp] Wallbox: receive message [2,"467133909","MeterValues",{"meterValue": [{"timestamp": "2025-10-27T21:41:13Z","sampledValue": [{"format": "Raw","location": "Outlet","context": "Sample.Periodic","measurand": "Energy.Active.Import.Register","unit": "Wh","value": "1052619.6"} ]} ],"connectorId": 1,"transactionId": 1761587590}]
2025-10-27 22:41:14.208 INFO (MainThread) [ocpp] Wallbox: send [3,"467133909",{}]
2025-10-27 22:41:16.229 INFO (MainThread) [ocpp] Wallbox: receive message [2,"1689372414","MeterValues",{"meterValue": [{"timestamp": "2025-10-27T21:41:15Z","sampledValue": [{"format": "Raw","location": "Outlet","context": "Sample.Periodic","measurand": "Energy.Active.Import.Register","unit": "Wh","value": "1052622.8"} ]} ],"connectorId": 1,"transactionId": 1761587590}]
2025-10-27 22:41:16.234 INFO (MainThread) [ocpp] Wallbox: send [3,"1689372414",{}]

i reinstalled the module lots of times , with measurands auto / manual whatever i do there is only one value that is reported during charge

[lostOzone]

When you setup the charger. You need to manually choose the measurehands. Auto detect doesn't work.

[gitantti]

I have the same case with Teltonika Teltocharge. Most of the measurands are unknown.
You mean that when I add the charger to OCPP integration I need to select the measurands.
Not quite sure how to do this, any hints for that.

[lostOzone]

Not quite sure how to do this, any hints for that.

Uncheck "Automatic detection of OCPP measurehands"