WiP 4.22.01 fhd patch test + bump all 4.19 boards to 4.22.01

- patches/coreboot-4.22.01/0001-x230-fhd-variant.patch created per
  - git fetch https://review.coreboot.org/coreboot refs/changes/50/28950/23 && git format-patch -1 --stdout FETCH_HEAD > ~/heads/patches/coreboot-pre422-x230fhd/7a42712.patch on top of coreboot commit 42f1fef5a620e98e7ece6a60744992265cc409d7
- all boards configs bumped with:
  - grep -Rn 4.22 boards/ | awk -F "/" {'print $2'}| while read line; do make BOARD=$line coreboot.save_in_oldconfig_format_in_place ; done

Signed-off-by: Thierry Laurion <[email protected]>

Author: tlaurion

boards/UNTESTED_p8z77-m_pro-tpm1-maximized/UNTESTED_p8z77-m_pro-tpm1-maximized.config

@@ -39,7 +39,7 @@ CONFIG_LINUX_CONFIG=config/linux-x230-maximized.config
 CONFIG_COREBOOT_CONFIG=config/coreboot-p8z77-m_pro-tpm1.config
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_CRYPTSETUP2=y

boards/UNTESTED_t420/UNTESTED_t420.config

@@ -1,6 +1,6 @@
 # Configuration for a t420 running Qubes 4.1 and other OS, X220 is identical to X230 on the Linux Side of things.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t420.config

boards/UNTESTED_t430-hotp-legacy/UNTESTED_t430-hotp-legacy.config

@@ -8,7 +8,7 @@
 # Addition vs standard x230 board config:
 # HOTP_KEY: HOTP challenge for currently supported USB Security dongles
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t430-legacy.config

boards/UNTESTED_t430-legacy-flash/UNTESTED_t430-legacy-flash.config

@@ -4,7 +4,7 @@
 # IDEALLY you should flash maximized top and bottom rom images exteranlly once instead.
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-legacy-flash.config

boards/UNTESTED_t430-legacy/UNTESTED_t430-legacy.config

@@ -5,7 +5,7 @@
 # dropbear support(ssh client/server)
 # e1000e (ethernet driver)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t430-legacy.config

boards/UNTESTED_t520-hotp-maximized/UNTESTED_t520-hotp-maximized.config

@@ -5,7 +5,7 @@
 # - Forged 00:DE:AD:C0:FF:EE MAC address  (if not extracting gbe.bin from backup with blobs/xx20/extract.sh)
 #   - Note that this MAC address can be modified under build/coreboot-VER/util/bincfg/gbe-82579LM.set
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t520-maximized.config

boards/UNTESTED_t520-maximized/UNTESTED_t520-maximized.config

@@ -5,7 +5,7 @@
 # - Forged 00:DE:AD:C0:FF:EE MAC address  (if not extracting gbe.bin from backup with blobs/xx20/extract.sh)
 #   - Note that this MAC address can be modified under build/coreboot-VER/util/bincfg/gbe-82579LM.set
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t520-maximized.config

boards/UNTESTED_t530-dgpu-hotp-maximized/UNTESTED_t530-dgpu-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a t530 with a dGPU. Initialization of the dGPU is necessary in order to use an external monitor via the DisplayPort (either the in-built mini-DisplayPort or the DisplayPort in the dock). In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t530-dgpu-maximized.config

boards/UNTESTED_t530-dgpu-maximized/UNTESTED_t530-dgpu-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a t530 with a dGPU. Initialization of the dGPU is necessary in order to use an external monitor via the DisplayPort (either the in-built mini-DisplayPort or the DisplayPort in the dock). In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t530-dgpu-maximized.config

boards/UNTESTED_t530-hotp-maximized/UNTESTED_t530-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a t530 without a dGPU. It will work just fine for a board with a dGPU, except you will not be able to use an external monitor via the mini-displayport or the dock's displayport, though external monitors will work via VGA ports. To initialize the dGPU please use one of the dgpu boards.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t530-maximized.config

boards/UNTESTED_t530-maximized/UNTESTED_t530-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a t530 without a dGPU. It will work just fine for a board with a dGPU, except you will not be able to use an external monitor via the mini-displayport or the dock's displayport, though external monitors will work via VGA ports. To initialize the dGPU please use one of the dgpu boards.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t530-maximized.config

boards/UNTESTED_w530-dgpu-K1000m-hotp-maximized/UNTESTED_w530-dgpu-K1000m-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a w530 with the K1000M Nvidia Quadro dGPU. Initialization of the dGPU is necessary in order to use an external monitor whether through the in-build VGA or mini-DisplayPort or via the dock. In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-dgpu-K1000m-maximized.config

boards/UNTESTED_w530-dgpu-K1000m-maximized/UNTESTED_w530-dgpu-K1000m-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a w530 with the K1000M Nvidia Quadro dGPU. Initialization of the dGPU is necessary in order to use an external monitor whether through the in-build VGA or mini-DisplayPort or via the dock. In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-dgpu-K1000m-maximized.config

boards/UNTESTED_w530-dgpu-K2000m-hotp-maximized/UNTESTED_w530-dgpu-K2000m-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a w530 with the K2000M Nvidia Quadro dGPU. Initialization of the dGPU is necessary in order to use an external monitor whether through the in-build VGA or mini-DisplayPort or via the dock. In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-dgpu-K2000m-maximized.config

boards/UNTESTED_w530-dgpu-K2000m-maximized/UNTESTED_w530-dgpu-K2000m-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a w530 with the K2000M Nvidia Quadro dGPU. Initialization of the dGPU is necessary in order to use an external monitor whether through the in-build VGA or mini-DisplayPort or via the dock. In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-dgpu-K2000m-maximized.config

boards/UNTESTED_x220/UNTESTED_x220.config

@@ -1,6 +1,6 @@
 # Configuration for a x220 running Qubes 4.1 and other OS, X220 is identical to X230 on the Linux Side of things.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x220.config

boards/qemu-coreboot-fbwhiptail-tpm1-hotp/qemu-coreboot-fbwhiptail-tpm1-hotp.config

@@ -5,7 +5,7 @@
 # Nitrokey Pro can also be used by forwarding the USB device from the host to
 # the VM.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)

boards/qemu-coreboot-fbwhiptail-tpm1/qemu-coreboot-fbwhiptail-tpm1.config

@@ -3,7 +3,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 1.2).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)

boards/qemu-coreboot-fbwhiptail-tpm2-hotp/qemu-coreboot-fbwhiptail-tpm2-hotp.config

@@ -4,7 +4,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 2.0).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)

boards/qemu-coreboot-fbwhiptail-tpm2/qemu-coreboot-fbwhiptail-tpm2.config

@@ -3,7 +3,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 2.0).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)

boards/qemu-coreboot-whiptail-tpm1-hotp/qemu-coreboot-whiptail-tpm1-hotp.config

@@ -5,7 +5,7 @@
 # Nitrokey Pro can also be used by forwarding the USB device from the host to
 # the VM.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)

boards/qemu-coreboot-whiptail-tpm1/qemu-coreboot-whiptail-tpm1.config

@@ -3,7 +3,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 1.2).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing))

boards/qemu-coreboot-whiptail-tpm2-hotp/qemu-coreboot-whiptail-tpm2-hotp.config

@@ -4,7 +4,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 2.0).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)

boards/qemu-coreboot-whiptail-tpm2/qemu-coreboot-whiptail-tpm2.config

@@ -3,7 +3,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 2.0).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)

boards/t420-hotp-maximized/t420-hotp-maximized.config

@@ -9,7 +9,7 @@
 # - dropbear
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t420-maximized.config

boards/t420-maximized/t420-maximized.config

@@ -8,7 +8,7 @@
 # Doesn't include (to fit in 7mb image)
 # - dropbear
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t420-maximized.config

boards/t430-hotp-maximized/t430-hotp-maximized.config

@@ -7,7 +7,7 @@
 #
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t430-maximized.config

boards/t430-maximized/t430-maximized.config

@@ -7,7 +7,7 @@
 #
 # - DOES NOT INCLUDE Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t430-maximized.config

boards/t440p-maximized/t440p-maximized.config

@@ -4,7 +4,7 @@ CONFIG_COREBOOT_CONFIG=config/coreboot-t440p.config
 CONFIG_LINUX_CONFIG=config/linux-t440p.config
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_CRYPTSETUP2=y

boards/w530-hotp-maximized/w530-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board ignores the in-built dGPU that comes with all w530's. In doing so the dGPU will not be initialized. This has some benefits in terms of reduced complexity in working with OS's with poor support for NVIDIA, better battery life and lower heat (making use of the thicker heatsink from a dGPU). Conversely, if you do not initialize the dGPU you will be unable to use an external monitor. To initialize the dGPU please use the dGPU boards that corresponds with the model of dGPU included with your device.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-maximized.config

boards/w530-maximized/w530-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board ignores the in-built dGPU that comes with all w530's. In doing so the dGPU will not be initialized. This has some benefits in terms of reduced complexity in working with OS's with poor support for NVIDIA, better battery life and lower heat (making use of the thicker heatsink from a dGPU). Conversely, if you do not initialize the dGPU you will be unable to use an external monitor. To initialize the dGPU please use the dGPU boards that corresponds with the model of dGPU included with your device.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-maximized.config

boards/w541-maximized/w541-maximized.config

@@ -4,7 +4,7 @@ CONFIG_COREBOOT_CONFIG=config/coreboot-w541.config
 CONFIG_LINUX_CONFIG=config/linux-w541.config
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_CRYPTSETUP2=y

boards/x220-hotp-maximized/x220-hotp-maximized.config

@@ -9,7 +9,7 @@
 # - dropbear
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x220-maximized.config

boards/x220-maximized/x220-maximized.config

@@ -9,7 +9,7 @@
 # - dropbear
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x220-maximized.config

boards/x230-hotp-legacy/x230-hotp-legacy.config

@@ -8,7 +8,7 @@
 # Addition vs standard x230 board config:
 # HOTP_KEY: HOTP challenge for currently supported USB Security dongles
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-legacy.config

boards/x230-hotp-maximized-fhd_edp/x230-hotp-maximized-fhd_edp.config

@@ -19,7 +19,7 @@
 #
 # - Includes: Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized-fhd_edp.config

boards/x230-hotp-maximized/x230-hotp-maximized.config

@@ -7,7 +7,7 @@
 #
 # - Includes: Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized.config

boards/x230-hotp-maximized_usb-kb/x230-hotp-maximized_usb-kb.config

@@ -9,7 +9,7 @@
 # 	Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # 	USB Keyboard support
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized.config

boards/x230-legacy-flash/x230-legacy-flash.config

@@ -4,7 +4,7 @@
 # IDEALLY you should flash maximized top and bottom rom images exteranlly once instead.
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-legacy-flash.config

boards/x230-legacy/x230-legacy.config

@@ -4,7 +4,7 @@
 # dropbear support(ssh client/server)
 # e1000e (ethernet driver)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-legacy.config

boards/x230-maximized-fhd_edp/x230-maximized-fhd_edp.config

@@ -19,7 +19,7 @@
 #
 # - DOES NOT INCLUDE Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized-fhd_edp.config

boards/x230-maximized/x230-maximized.config

@@ -7,7 +7,7 @@
 #
 # - DOES NOT INCLUDE Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized.config

boards/z220-cmt-maximized/z220-cmt-maximized.config

@@ -25,7 +25,7 @@ CONFIG_LINUX_CONFIG=config/linux-c216.config
 CONFIG_COREBOOT_CONFIG=config/coreboot-z220-cmt.config
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.19
+export CONFIG_COREBOOT_VERSION=4.22.01
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_CRYPTSETUP2=y