Web Installer Handshake pins for flashing

[wavoigt]

Hi,
Doesn't the Web Installer use handshake pins (DTR/RTS) for resetting and switching the ESP boot mode (GPIO0)?
I had to push the reset button and pull GPIO0 to GND manually for Flash mode.
I think you should mention that in the Web installer.

[martin-ger]

In most cases, the flasher works directly without GPIO0 to boot mode, especially on USB-UART interfaces, it does the resetting and switching.
BOOT+RST might be required on native USB/JTAG interfaces on newer chips and boards, especially the S3 and C6.