missing includes while build for ESP32-S3

[Pepito-design]

I modified the given platformio.ini ..... it should build now.
But there are includes missing now:
platformio.ini:
[env]
framework = arduino
; board = esp32dev
board = esp32s3box
; upload_speed = 921600
build_flags =
-std=c++17
-std=gnu++17
-Wall -Wextra
-D CONFIG_ARDUHAL_LOG_COLORS
-D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-D MYCILA_JSON_SUPPORT
build_unflags =
-std=gnu++11
lib_deps =
bblanchon/ArduinoJson @ 7.4.2
mathieucarbou/MycilaDS18@^5.0.0
; paulstoffregen/OneWire @ 2.3.8
; milesburton/DallasTemperature @ 3.11.0
upload_protocol = esptool
monitor_speed = 115200
monitor_filters = esp32_exception_decoder, log2file

[platformio]
default_envs = arduino ;, arduino-3 ; , arduino-rc
lib_dir = .
; src_dir = examples/Temperature
; src_dir = examples/TemperatureJson

[env:arduino]
platform = espressif32@6.5.0

==========
Build log

• Executing task in folder RMT-Sensor: platformio run

Processing arduino (platform: espressif32@6.5.0; framework: arduino; board: esp32s3box)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32s3box.html
PLATFORM: Espressif 32 (6.5.0) > Espressif ESP32-S3-Box
HARDWARE: ESP32S3 240MHz, 320KB RAM, 16MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-builtin, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

• framework-arduinoespressif32 @ 3.20014.231204 (2.0.14)
• tool-esptoolpy @ 1.40501.0 (4.5.1)
• tool-openocd-esp32 @ 2.1100.20220706 (11.0)
• toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
• toolchain-xtensa-esp32s3 @ 8.4.0+2021r2-patch5
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 41 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- ArduinoJson @ 7.4.2
  |-- MycilaDS18 @ 5.0.0
  Building in release mode

warning: Support for Python older than 3.7.0 is deprecated (3.6.15 detected).
If this will cause hardship, contact scons-dev@scons.org
File "/home/peter/.platformio/packages/tool-scons/scons.py", line 97, in
Compiling .pio/build/arduino/src/main.cpp.o
Building .pio/build/arduino/bootloader.bin
Generating partitions .pio/build/arduino/partitions.bin
esptool.py v4.5.1
Creating esp32s3 image...
Merged 1 ELF section
Successfully created esp32s3 image.
In file included from .pio/libdeps/arduino/MycilaDS18/src/MycilaDS18.h:8,
from src/main.cpp:3:
.pio/libdeps/arduino/MycilaDS18/src/./esp32-ds18b20/OneWireESP32.h:7:10: fatal error: driver/rmt_rx.h: No such file or directory
#include "driver/rmt_rx.h"
^~~~~~~~~~~~~~~~~
compilation terminated.
Compiling .pio/build/arduino/lib570/MycilaDS18/MycilaDS18.cpp.o
*** [.pio/build/arduino/src/main.cpp.o] Error 1
In file included from .pio/libdeps/arduino/MycilaDS18/src/MycilaDS18.h:8,
from .pio/libdeps/arduino/MycilaDS18/src/MycilaDS18.cpp:5:
.pio/libdeps/arduino/MycilaDS18/src/./esp32-ds18b20/OneWireESP32.h:7:10: fatal error: driver/rmt_rx.h: No such file or directory
#include "driver/rmt_rx.h"
^~~~~~~~~~~~~~~~~
compilation terminated.
*** [.pio/build/arduino/lib570/MycilaDS18/MycilaDS18.cpp.o] Error 1
================================================== [FAILED] Took 3.31 seconds ==================================================

• The terminal process "platformio 'run'" terminated with exit code: 1.
• Terminal will be reused by tasks, press any key to close it.

[mathieucarbou]

This is not an issue - you are just building against an outdated and unsupported Arduino Core version.
Please have a look at the pio file in the project.