voron-v2-config/printer.cfg at main · mattsn0w/voron-v2-config · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
[include mainsail.cfg]
[include mcu-EBBCan.cfg]
[include mcu.cfg]
[include stealthburner_leds.cfg]
[include macros.cfg]
[include runout_sensor.cfg]
[include input_shaper.cfg]

#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 61.450
#*# pid_ki = 3.176
#*# pid_kd = 297.265
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 20.700
#*# pid_ki = 1.394
#*# pid_kd = 76.847
#*#
#*# [probe]
#*# z_offset = -1.500
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 	  0.032500, 0.040000, 0.063750, 0.055000, 0.072500, 0.072500, 0.037500
#*# 	  -0.012500, 0.017500, 0.018750, 0.020000, 0.030000, 0.007500, -0.015000
#*# 	  -0.005000, 0.005000, 0.002500, 0.008750, -0.005000, -0.020000, -0.045000
#*# 	  -0.045000, -0.027500, -0.040000, -0.025000, -0.012500, -0.027500, -0.027500
#*# 	  -0.032500, -0.025000, -0.030000, -0.027500, 0.005000, 0.002500, -0.037500
#*# 	  0.007500, 0.007500, -0.017500, 0.015000, 0.025000, 0.017500, -0.020000
#*# 	  0.030000, 0.017500, 0.008750, 0.025000, 0.060000, 0.000000, 0.005000
#*# x_count = 7
#*# y_count = 7
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = bicubic
#*# tension = 0.2
#*# min_x = 40.0
#*# max_x = 319.96
#*# min_y = 50.0
#*# max_y = 320.0