Description
I have a problem with aioble on my pico w. I have created two services, but at most seven characteristics are displayed. For example, for the truncated code section below, only the seven characteristics up to the # TODO comment are displayed. I have already tried lowering the mtu size and creating a third service and registering the characteristics there. Changing the order doesn't solve the problem, i.e. if I move self.wind above self.colors, the wind characteristics are advertised, but there are still only seven characteristics in total. If I clear all characteristics values there are still only seven characteristics advertised so I don't think that it is due to size limitations.
import gc
import aioble
import asyncio
import ujson
import micropython_ota
from bluetooth import UUID
from helpers import load_json, json_has_keys
class BLE:
def __init__(self, config):
aioble.config(mtu=512)
self.config = config
self.service_meta = aioble.Service(UUID("ba7f1568-b2ea-4fda-8d5b-9e5f5fe6925f"))
self.sku = aioble.Characteristic(self.service_meta, UUID("374ce939-0e41-4ca3-8023-450a5d7cc868"), read=True, capture=True)
self.id = aioble.Characteristic(self.service_meta, UUID("3b85c350-d60d-4213-ac83-12f4b33de750"), read=True, capture=True)
self.version = aioble.Characteristic(self.service_meta, UUID("89b9c4ce-afc8-446b-908f-6ab44b95bc3d"), read=True, write=True, capture=True)
self.service_settings = aioble.Service(UUID("771cf459-392a-4100-9d8c-b3c7e32883bc"))
self.wifi_init_scan = aioble.Characteristic(self.service_settings, UUID("bc004c3e-48de-4496-9465-c8ea1c4ae8cf"), write=True)
self.wifi_available_networks = aioble.Characteristic(self.service_settings, UUID("d7a96f45-c135-4cee-a053-cf50b621bfa5"), read=True, notify=True)
self.wifi = aioble.Characteristic(self.service_settings, UUID("16a5d9f1-ab50-476e-a9fc-1a20230beedf"), read=True, write=True, capture=True)
self.colors = aioble.Characteristic(self.service_settings, UUID("038e91b7-eb88-4ecd-acfd-811797ce6c00"), read=True, write=True, capture=True)
# TODO: Not all characteristics are shown
self.wind = aioble.Characteristic(self.service_settings, UUID("e03f403e-0e21-41b9-91d4-2075608c7bc9"), read=True, write=True, capture=True)
self.times = aioble.Characteristic(self.service_settings, UUID("a5342786-ad90-404b-bc51-cfcf6d465051"), read=True, write=True, capture=True)
self.ota = aioble.Characteristic(self.service_settings, UUID("ae8d0e7f-ff36-4da7-a720-93ed8cf9f5f5"), read=True, write=True, capture=True)
self.brightness = aioble.Characteristic(self.service_settings, UUID("c011b876-5414-4f5e-aad9-1050fa77e88e"), read=True, write=True, capture=True)
aioble.register_services(
self.service_meta,
self.service_settings
)
gc.collect()
async def advertise(self):
while True:
gc.collect()
async with await aioble.advertise(
250_000,
name=f"{self.config.get('sku')}_{self.config.get('id')}",
services=[UUID("ba7f1568-b2ea-4fda-8d5b-9e5f5fe6925f")]
) as connection:
await connection.exchange_mtu(512)
print("Connection from", connection.device)
self.init()
self.update()
asyncio.create_task(self.watch_brightness())
asyncio.create_task(self.watch_colors())
asyncio.create_task(self.watch_wifi_init_scan())
asyncio.create_task(self.watch_wifi())
asyncio.create_task(self.watch_times())
asyncio.create_task(self.watch_ota())
gc.collect()
await connection.disconnected(timeout_ms=None)I stumbled across this issue and even though its for ESP32 and Arduino the issue is the same. I already looked into the definitions of aioble but I did not found anything related to this.
Do you have any suggestions?