Home Assistant NUT container update detailed (was: "Support CyberPower RMCARD205"; also: CyberPower MIB/OID info attached)

[C4Wiz]

can you add support for this card please?

[username115]

I would like to second this request

[dogsbody]

+1

This card supports SNMP v1 & v3

The MIB file is CyberPower_MIB_v2.9.MIB.TXT which was downloaded (and renamed for uploading) from https://www.cyberpower.com/uk/en/product/sku/rmcard205#downloads

[aquette]

Please look ar #416 to prépare the needed data. I'll do my best in january ti look ar this. Le dim. 22 déc. 2019 à 22:33, Dan Benton <notifications@github.com> a écrit :

…

+1 This card supports SNMP v1 & v3 The MIB file is CyberPower_MIB_v2.9.MIB.TXT <https://github.com/networkupstools/nut/files/3993029/CyberPower_MIB_v2.9.MIB.TXT> which was downloaded (and renamed for uploading) from https://www.cyberpower.com/uk/en/product/sku/rmcard205#downloads — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#590?email_source=notifications&email_token=AAHA43NEQI5SR6BTQIOQJFDQZ7MKHA5CNFSM4FPMETGKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEHP2HTI#issuecomment-568304589>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAHA43PQPNCLIMETTXAAUNLQZ7MKHANCNFSM4FPMETGA> .

[tnagels]

@aquette I'd love to help with this as I am also in need of the update. I don't understand what you mean by referring to #416, there is a ton of information there. What exactly do you expect from me/us?

[aquette]

hi @tnagels
look for the instructions around gen-snmp-subdriver.sh to provide me a base.
I'll then turns this into a branch like in #416 (comment), so that you can test and we can progress

Update: note that we already have https://github.com/networkupstools/nut/blob/master/drivers/cyberpower-mib.c
I'd be first interested in seeing the results from this.
Also note that NUT 2.7.4 (last official release) only have version 0.1 of this driver, while the GIT version has 0.2, so it would be better to use GIT (in which case, use the above referenced comment to get and compile)

[tnagels]

@aquette I will try to check this later this week on a separate system. The setup I am using now does not allow me to do this (it is in a managed container I have little control over).

Meanwhile, I'll also check the driver you referenced by just comparing the MIB entries with what I get when doing an snmp walk. If they match up there is a decent chance the driver will work i guess.

Thomas

[aquette]

@tnagels ack. it's possible that this current driver needs some update and completion though. Time (and your tests) will tell.

[freecableguy]

Would also appreciate seeing RMCARD205 support added.

[cybrnook]

@aquette I have one of these cards in my UPS at home, so have free access to it anytime. However, trying to read above, and your reference to the link for #416 , I don't even know where to start to help you and the community. Just a normal Joe, so would need really step by step to do this.

[foundbobby]

Is anyone on this thread actively working on providing the information @aquette requested to support RMCARD205? Would really like to see this card supported in NUT/homeassistant.io.

I don't have a lot of free time but can take a look if this isn't already in progress.

[tnagels]

@aquette I will try to check this later this week on a separate system. The setup I am using now does not allow me to do this (it is in a managed container I have little control over).

Unfortunately I'm not getting round to testing this. So while I'm still interested in this, unfortunately I won't be part of the solution.

[cybrnook]

Is anyone on this thread actively working on providing the information @aquette requested to support RMCARD205? Would really like to see this card supported in NUT/homeassistant.io.

I don't have a lot of free time but can take a look if this isn't already in progress.

I have the card, but need a simple guide to follow to get the info. Step by step :-(

[DaftHonk]

Compiling from git with the 'cyberpower MIB 0.2' gives me:

root@nut:/usr/local/ups/sbin# upsc myups@localhost
Init SSL without certificate database
battery.charge: 100
battery.runtime: 417600
battery.runtime.elapsed: 0
device.mfr: CYBERPOWER
device.model: OR2200LCDRT2U
device.serial: 
device.type: ups
driver.name: snmp-ups
driver.parameter.pollfreq: 15
driver.parameter.pollinterval: 2
driver.parameter.port: [ip]
driver.parameter.snmp_version: v1
driver.parameter.synchronous: no
driver.version: 2.7.4-747-g3d88a972
driver.version.data: cyberpower MIB 0.2
driver.version.internal: 1.12
input.frequency: 60
input.voltage: 120
output.voltage: 120
ups.firmware: BFAD101*781
ups.load: 16
ups.mfr: CYBERPOWER
ups.model: OR2200LCDRT2U
ups.serial: 
ups.status: OL

and:

root@nut:/usr/local/ups/sbin# snmpwalk -c [private] -v1 [ip] .1.3.6.1.4.1.3808.1.1.1
iso.3.6.1.4.1.3808.1.1.1.1.1.1.0 = STRING: "OR2200LCDRT2U"
iso.3.6.1.4.1.3808.1.1.1.1.1.2.0 = STRING: "RMCARD205"
iso.3.6.1.4.1.3808.1.1.1.1.2.1.0 = STRING: "BFAD101*781"
iso.3.6.1.4.1.3808.1.1.1.1.2.3.0 = ""
iso.3.6.1.4.1.3808.1.1.1.1.2.4.0 = STRING: "1.2.0"
iso.3.6.1.4.1.3808.1.1.1.1.2.5.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.1.2.6.0 = INTEGER: 2000
iso.3.6.1.4.1.3808.1.1.1.1.2.7.0 = INTEGER: 1320
iso.3.6.1.4.1.3808.1.1.1.1.2.8.0 = INTEGER: 167
iso.3.6.1.4.1.3808.1.1.1.1.2.9.0 = STRING: "TALHZ2002868"
iso.3.6.1.4.1.3808.1.1.1.2.1.1.0 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.2.1.2.0 = Timeticks: (0) 0:00:00.00
iso.3.6.1.4.1.3808.1.1.1.2.1.3.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.2.1.4.0 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.2.2.1.0 = Gauge32: 100
iso.3.6.1.4.1.3808.1.1.1.2.2.2.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.2.2.3.0 = Gauge32: 0
iso.3.6.1.4.1.3808.1.1.1.2.2.4.0 = Timeticks: (696000) 1:56:00.00
iso.3.6.1.4.1.3808.1.1.1.2.2.5.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.2.2.8.0 = INTEGER: 24
iso.3.6.1.4.1.3808.1.1.1.2.2.9.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.3.1.1.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.3.2.1.0 = Gauge32: 1200
iso.3.6.1.4.1.3808.1.1.1.3.2.2.0 = Gauge32: 1200
iso.3.6.1.4.1.3808.1.1.1.3.2.3.0 = Gauge32: 1200
iso.3.6.1.4.1.3808.1.1.1.3.2.4.0 = Gauge32: 600
iso.3.6.1.4.1.3808.1.1.1.3.2.5.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.3.2.6.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.4.1.1.0 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.4.1.2.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.4.1.3.0 = STRING: "47~63 Hz"
iso.3.6.1.4.1.3808.1.1.1.4.2.1.0 = Gauge32: 1200
iso.3.6.1.4.1.3808.1.1.1.4.2.2.0 = INTEGER: 600
iso.3.6.1.4.1.3808.1.1.1.4.2.3.0 = Gauge32: 16
iso.3.6.1.4.1.3808.1.1.1.4.2.4.0 = Gauge32: 0
iso.3.6.1.4.1.3808.1.1.1.4.2.5.0 = Gauge32: 211
iso.3.6.1.4.1.3808.1.1.1.5.1.1.0 = INTEGER: 24
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.1 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.2 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.3 = INTEGER: 3
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.4 = INTEGER: 4
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.5 = INTEGER: 5
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.6 = INTEGER: 6
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.7 = INTEGER: 7
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.8 = INTEGER: 8
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.9 = INTEGER: 9
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.10 = INTEGER: 10
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.11 = INTEGER: 11
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.12 = INTEGER: 12
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.13 = INTEGER: 13
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.14 = INTEGER: 14
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.1.15 = INTEGER: 15
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.1 = STRING: "Outlet1"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.2 = STRING: "Outlet2"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.3 = STRING: "Outlet3"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.4 = STRING: "Outlet4"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.5 = STRING: "Outlet5"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.6 = STRING: "Outlet6"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.7 = STRING: "Outlet7"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.8 = STRING: "Outlet8"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.9 = STRING: "Outlet9"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.10 = STRING: "Outlet10"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.11 = STRING: "Outlet11"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.12 = STRING: "Outlet12"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.13 = STRING: "Outlet13"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.14 = STRING: "Outlet14"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.2.15 = STRING: "Outlet15"
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.1 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.2 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.3 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.4 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.5 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.6 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.7 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.8 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.9 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.10 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.11 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.12 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.13 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.14 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.3.15 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.1 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.2 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.3 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.4 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.5 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.6 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.7 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.8 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.9 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.10 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.11 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.12 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.13 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.14 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.1.2.1.4.15 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.2.1.0 = INTEGER: 120
iso.3.6.1.4.1.3808.1.1.1.5.2.4.0 = INTEGER: 3
iso.3.6.1.4.1.3808.1.1.1.5.2.9.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.5.2.10.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.5.2.11.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.5.2.13.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.5.2.14.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.5.2.15.0 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.5.2.16.0 = INTEGER: 0
iso.3.6.1.4.1.3808.1.1.1.5.2.17.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.5.2.18.0 = INTEGER: 10
iso.3.6.1.4.1.3808.1.1.1.6.2.1.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.6.2.2.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.6.2.3.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.6.2.5.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.6.2.6.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.7.2.2.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.7.2.3.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.7.2.4.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.7.2.6.0 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.7.2.7.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.7.2.8.0 = NULL
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.1.1 = INTEGER: 1
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.1.2 = INTEGER: 2
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.1.3 = INTEGER: 3
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.1.4 = INTEGER: 4
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.1.5 = INTEGER: 5
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.2.1 = INTEGER: 3
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.2.2 = INTEGER: 3
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.2.3 = INTEGER: 3
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.2.4 = INTEGER: 3
iso.3.6.1.4.1.3808.1.1.1.8.1.1.1.2.5 = INTEGER: 3

This is more information than provided by MIB 0.1 as it provides input and output voltages as well as system load.

[berrmirt]

I have this card and would be glad to assist in anyway possible. I note that on the CP website, they have MIB v2.9: here

[nesys]

Hi All,

any update on this? any luck with RMCARD205 with NUT? thanks