daemons

# This file tells the frr package which daemons to start.
#
# Sample configurations for these daemons can be found in
# /usr/share/doc/frr/examples/.
#
# ATTENTION:
#
# When activating a daemon for the first time, a config file, even if it is
# empty, has to be present *and* be owned by the user and group "frr", else
# the daemon will not be started by /etc/init.d/frr. The permissions should
# be u=rw,g=r,o=.
# When using "vtysh" such a config file is also needed. It should be owned by
# group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
#
# The watchfrr, zebra and staticd daemons are always started.
#
bgpd=yes
ospfd=no
ospf6d=no
ripd=no
ripngd=no
isisd=no
pimd=no
pim6d=no
ldpd=no
nhrpd=no
eigrpd=no
babeld=no
sharpd=no
pbrd=no
bfdd=no
fabricd=no
vrrpd=no
pathd=no

#
# If this option is set the /etc/init.d/frr script automatically loads
# the config via "vtysh -b" when the servers are started.
# Check /etc/pam.d/frr if you intend to use "vtysh"!
#
vtysh_enable=yes
zebra_options="  -A 127.0.0.1 -s 90000000"
bgpd_options="   -A 127.0.0.1"
ospfd_options="  -A 127.0.0.1"
ospf6d_options=" -A ::1"
ripd_options="   -A 127.0.0.1"
ripngd_options=" -A ::1"
isisd_options="  -A 127.0.0.1"
pimd_options="   -A 127.0.0.1"
pim6d_options="  -A ::1"
ldpd_options="   -A 127.0.0.1"
nhrpd_options="  -A 127.0.0.1"
eigrpd_options=" -A 127.0.0.1"
babeld_options=" -A 127.0.0.1"
sharpd_options=" -A 127.0.0.1"
pbrd_options="   -A 127.0.0.1"
staticd_options="-A 127.0.0.1"
bfdd_options="   -A 127.0.0.1"
fabricd_options="-A 127.0.0.1"
vrrpd_options="  -A 127.0.0.1"
pathd_options="  -A 127.0.0.1"


# If you want to pass a common option to all daemons, you can use the
# "frr_global_options" variable.
#
#frr_global_options=""


# The list of daemons to watch is automatically generated by the init script.
# This variable can be used to pass options to watchfrr that will be passed
# prior to the daemon list.
#
# To make watchfrr create/join the specified netns, add the the "--netns"
# option here. It will only have an effect in /etc/frr/<somename>/daemons, and
# you need to start FRR with "/usr/lib/frr/frrinit.sh start <somename>".
#
#watchfrr_options=""


# configuration profile
#
#frr_profile="traditional"
#frr_profile="datacenter"


# This is the maximum number of FD's that will be available.  Upon startup this
# is read by the control files and ulimit is called.  Uncomment and use a
# reasonable value for your setup if you are expecting a large number of peers
# in say BGP.
#
#MAX_FDS=1024


# For any daemon, you can specify a "wrap" command to start instead of starting
# the daemon directly. This will simply be prepended to the daemon invocation.
# These variables have the form daemon_wrap, where 'daemon' is the name of the
# daemon (the same pattern as the daemon_options variables).
#
# Note that when daemons are started, they are told to daemonize with the `-d`
# option. This has several implications. For one, the init script expects that
# when it invokes a daemon, the invocation returns immediately. If you add a
# wrap command here, it must comply with this expectation and daemonize as
# well, or the init script will never return. Furthermore, because daemons are
# themselves daemonized with -d, you must ensure that your wrapper command is
# capable of following child processes after a fork() if you need it to do so.
#
# If your desired wrapper does not support daemonization, you can wrap it with
# a utility program that daemonizes programs, such as 'daemonize'. An example
# of this might look like:
#
# bgpd_wrap="/usr/bin/daemonize /usr/bin/mywrapper"
#
# This is particularly useful for programs which record processes but lack
# daemonization options, such as perf and rr.
#
# If you wish to wrap all daemons in the same way, you may set the "all_wrap"
# variable.
#
#all_wrap=""