doc: Mark LwM2M carrier lib and memfault as experimental

Marking support for LwM2M carrier lib AT commands and
memfault features through a Kconfig fragment as experimental.

Signed-off-by: Tommi Rantanen <tommi.rantanen@nordicsemi.no>

Author: trantanen

app/Kconfig

@@ -253,9 +253,9 @@ config SM_NRF_CLOUD
 config SM_MQTTC
 	bool "MQTT client support"
 	default y
-	select EXPERIMENTAL
 	select MQTT_LIB
 	select MQTT_LIB_TLS
+	select EXPERIMENTAL
 
 config SM_FULL_FOTA
 	bool "Full modem FOTA support"
@@ -308,8 +308,7 @@ config SM_GNSS_OUTPUT_NMEA_SATELLITES
 	depends on SM_LOG_LEVEL_DBG
 	help
 	  If enabled, NMEA messages that pertain to the satellites will be output
-	  along with the other NMEA messages. Those are output in debug logs, and
-	  can also be output to a dedicated CMUX channel.
+	  along with the other NMEA messages. Those are output in debug logs.
 
 config SM_PGPS_INJECT_FIX_DATA
 	bool "Inject the data obtained when acquiring a fix"

app/src/lwm2m_carrier/Kconfig

@@ -6,6 +6,7 @@
 config SM_CARRIER
 	bool "LwM2M Carrier support"
 	depends on LWM2M_CARRIER
+	select EXPERIMENTAL
 
 if SM_CARRIER
 

doc/app/at_carrier.rst

@@ -7,6 +7,10 @@ LwM2M carrier library AT commands
    :local:
    :depth: 2
 
+.. note::
+
+   These AT commands are `Experimental <Software maturity levels_>`_.
+
 This page describes AT commands related to the LwM2M carrier library.
 
 Carrier event #XCARRIEREVT

doc/app/sm_configuration.rst

@@ -273,6 +273,7 @@ The following configuration files are provided:
 * :file:`overlay-carrier-softbank.conf` and :file:`sysbuild-softbank.conf` - Configuration files that add SoftBank configurations needed by the carrier library.
   Used in conjunction with :file:`overlay-carrier.conf`.
   For more information, see the `Carrier-specific dependencies`_ section of the `LwM2M carrier`_ documentation.
+
 * :file:`overlay-carrier-lgu.conf` - This configuration file adds LG U+ configurations needed by the carrier library.
   Used in conjunction with :file:`overlay-carrier.conf`.
   For more information, see the `Carrier-specific dependencies`_ section of the `LwM2M carrier`_ documentation.
@@ -294,6 +295,10 @@ The following configuration files are provided:
 * :file:`overlay-memfault.conf` - Configuration file that enables `Memfault`_.
   For more information about Memfault features in |NCS|, see the `Memfault library`_ docs.
 
+  .. note::
+
+     The use of Memfault features in |SM| are `Experimental <Software maturity levels_>`_.
+
 * :file:`overlay-disable-dtr.overlay` - Devicetree overlay that disables the DTR and RI pins and related functionality.
   This overlay can be used if your setup does not have the need or means for managing the power externally.
   Modify the overlay to fit your configuration.