Update

Author: dawidprzybylo

nrf_802154/doc/multiprotocol_switching_tables.rst

@@ -27,11 +27,8 @@ BLE to 15.4 Transitions:
 
 The measurements are collected during BLE advertisement, scanning, and connection activities.
 
-Described measurement uses the nRF21540 Front-End Module (Eagle) to precisely track radio state transitions
-through its control pins. Here's what this specific event means:
-
-The nRF21540 (Eagle) is a power amplifier and low-noise amplifier module that enhances RF performance. In this
-test setup, it's connected to the Nordic SoC and provides critical timing information through its control pins.
+Described measurement uses the nRF21540 Front-End Module (Eagle) connected to the Nordic SoC that provides
+critical timing information through its control pins.
 
 The RX_EN pin specifically controls the Low-Noise Amplifier (LNA) function of the Eagle:
     - When RX_EN is high (activated): The LNA is enabled, amplifying incoming RF signals during receive
@@ -45,7 +42,9 @@ transitions.
 
 Disclaimer
 ----------
-.. note::   All information and tables below are strictly informational, do not represent requirements,    and were measured using Nordic DK development kits.
+.. note::
+   All information and tables below are strictly informational, do not represent requirements,
+   and were measured using Nordic DK development kits.