nrf_modem: update library

SHA: 4deb56c10abeb60ef127293b2ed0059c1a50e2a2

Automatically created by libmodem Github workflow.

Signed-off-by: Nordic Builder <[email protected]>

Author: NordicBuilder

nrf_modem/include/nrf_modem_dect_phy.h

@@ -142,6 +142,13 @@ enum nrf_modem_dect_phy_err {
 	 * @brief Operation is not allowed in the current radio mode.
 	 */
 	NRF_MODEM_DECT_PHY_ERR_RADIO_MODE_CONFLICT = 0x100B,
+	/**
+	 * @brief Handle is already in use.
+	 *
+	 * Each operation given to the modem must have a unique handle among all uncompleted
+	 * operations. Handles may be reused after an operation completes.
+	 */
+	NRF_MODEM_DECT_PHY_ERR_HANDLE_IN_USE = 0x100C,
 	/**
 	 * @brief Unsupported carrier.
 	 */
@@ -1437,6 +1444,36 @@ struct nrf_modem_dect_phy_band_get_event {
 	struct nrf_modem_dect_phy_band *band;
 };
 
+/**
+ * @brief Test RF TX CW operation codes.
+ */
+enum nrf_modem_dect_phy_test_rf_tx_cw_oper {
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_OPER_ON,
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_OPER_OFF,
+};
+
+/**
+ * @brief Test RF TX CW operation status codes.
+ */
+enum nrf_modem_dect_phy_test_rf_tx_cw_err {
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_ERR_NO_ERROR = 0,
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_ERR_ERROR = -1,
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_ERR_TX_ALREADY_ON = -100,
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_ERR_TX_ALREADY_OFF = -101,
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_ERR_BUFFER_RESERVE_FAILED = -102,
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_ERR_INVALID_OPERATION = -103,
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_ERR_DSP_CONFIG_FAILURE = -104,
+	NRF_MODEM_DECT_PHY_TEST_RF_TX_CW_ERR_MSG_SEND_FAILED = -105,
+};
+
+/**
+ * @brief Test RF TX CW control event.
+ */
+struct nrf_modem_dect_phy_test_rf_tx_cw_control_event {
+	/** @brief Operation result. */
+	enum nrf_modem_dect_phy_test_rf_tx_cw_err err;
+};
+
 /**
  * @brief STF cover sequence control event.
  */
@@ -1601,6 +1638,10 @@ enum nrf_modem_dect_phy_event_id {
 	 * @brief Event to indicate the completion of STF configuration.
 	 */
 	NRF_MODEM_DECT_PHY_EVT_STF_CONFIG,
+	/**
+	 * @brief Event to indicate the completion of the test RF TX CW configuration.
+	 */
+	NRF_MODEM_DECT_PHY_EVT_TEST_RF_TX_CW_CONTROL_CONFIG,
 };
 
 /**
@@ -1636,6 +1677,7 @@ struct nrf_modem_dect_phy_event {
 		struct nrf_modem_dect_phy_capability_get_event capability_get;
 		struct nrf_modem_dect_phy_band_get_event band_get;
 		struct nrf_modem_dect_phy_latency_info_event latency_get;
+		struct nrf_modem_dect_phy_test_rf_tx_cw_control_event test_rf_tx_cw_control;
 		struct nrf_modem_dect_phy_stf_control_event stf_cover_seq_control;
 		struct nrf_modem_dect_phy_link_config_event link_config;
 	};
@@ -1989,6 +2031,35 @@ int nrf_modem_dect_phy_latency_get(void);
  */
 int nrf_modem_dect_phy_time_get(void);
 
+/**
+ * @brief Control continuous wave transmission.
+ *
+ * The default, applied at each initialization, is OFF.
+ *
+ * Continuous wave transmission can only be turned on when the DECT PHY interface is not
+ * initialized. DECT PHY interface initialization is not allowed when continuous wave transmission
+ * is on.
+ *
+ * @note
+ * This API is intended for certification purposes only.
+ * It should not be used for normal operation.
+ *
+ * This operation is performed asynchronously.
+ * Completion of this operation is indicated by the
+ * @ref NRF_MODEM_DECT_PHY_EVT_TEST_RF_TX_CW_CONTROL_CONFIG event.
+ *
+ * @param operation Control operation code.
+ * @param carrier Carrier on which the wave is transmitted.
+ * @param power Power of the transmission in dBm.
+ *
+ * @retval 0           Request was sent to modem.
+ * @retval -NRF_EPERM  The Modem library is not initialized.
+ * @retval -NRF_EFAULT No event handler is set.
+ * @retval -NRF_ENOMEM Not enough shared memory for this request.
+ */
+int nrf_modem_dect_phy_test_rf_tx_cw_control(enum nrf_modem_dect_phy_test_rf_tx_cw_oper operation,
+					uint16_t carrier, int8_t power);
+
 /**
  * @brief STF cover sequence control.
  *

nrf_modem/include/nrf_socket.h

@@ -305,6 +305,9 @@ extern "C" {
 #define NRF_SO_TCP_SRV_SESSTIMEO 55
 /** Set a callback for poll events (write-only).
  *  See @ref nrf_modem_pollcb_t for the callback function type.
+ *
+ * @note The callback is executed in an interrupt context.
+ *	 Take care to offload any processing as appropriate.
  */
 #define NRF_SO_POLLCB 60
 /** Release Assistance Indication (RAI) (write-only).
@@ -323,6 +326,49 @@ extern "C" {
  *       modem firmware version 2.0.2 and newer.
  */
 #define NRF_SO_IPV6_DELAYED_ADDR_REFRESH 62
+/**
+ * Set a callback to be called when a send request is acknowledged by the network and
+ * the data has been acknowledged by the peer, if required by the network protocol, or until the
+ * timeout, given by the @ref NRF_SO_SNDTIMEO socket option, is reached. Valid timeout values are
+ * 1 to 600 seconds.
+ * See @ref nrf_modem_sendcb_t for the callback function type.
+ *
+ * @note The callback is executed in an interrupt context.
+ *	 Take care to offload any processing as appropriate.
+ *
+ * @note This is only supported by the following modem firmware:
+ *       - mfw_nrf9151-ntn
+ *
+ * This socket option cannot be used along with the @ref NRF_MSG_WAITACK send flag.
+ */
+#define NRF_SO_SENDCB 63
+/** @} */
+
+/**
+ * @defgroup nrf_socket_options_sendcb_params Socket send callback option parameters.
+ * @ingroup nrf_socket
+ * @{
+ */
+/**
+ * @brief This structure is used to describe the parameters to a send callback function.
+ */
+struct nrf_modem_sendcb_params {
+	/** Socket handle */
+	int fd;
+	/** Status. Can be 0 on successful send or NRF_EAGAIN on timeout. */
+	int status;
+	/** Number of bytes that was sent. */
+	size_t bytes_sent;
+};
+
+/** Callback for send events */
+typedef void (*nrf_modem_sendcb_t)(const struct nrf_modem_sendcb_params *params);
+
+/** @c nrf_send() and @c nrf_sendto() callback */
+struct nrf_modem_sendcb {
+	/** Callback function */
+	nrf_modem_sendcb_t callback;
+};
 /** @} */
 
 /**
@@ -346,8 +392,11 @@ extern "C" {
 /** Request a blocking read operation until the request is satisfied. */
 #define NRF_MSG_WAITALL 0x100
 /** Request a blocking send operation until the request is acknowledged.
- *  When used in @c nrf_send() or @c nrf_sendto(), the operation will block until the data has been
- *  sent on-air and acknowledged by the peer, if required by the network protocol.
+ *  When used in @c nrf_send() or @c nrf_sendto(), the operation is blocked until the data has been
+ *  sent on-air and acknowledged by the peer, if required by the network protocol, or until the
+ *  timeout, given by the @ref NRF_SO_SNDTIMEO socket option, is reached. Valid timeout values are
+ *  1 to 600 seconds.
+ *  This send flag cannot be used along with the @ref NRF_SO_SENDCB socket option.
  */
 #define NRF_MSG_WAITACK 0x200
 /** @} */
@@ -866,6 +915,8 @@ int nrf_connect(int socket, const struct nrf_sockaddr *address, nrf_socklen_t ad
  * - [NRF_ECANCELED] Operation canceled because of APN rate control.
  * - [NRF_ENOMEM] TCP stream interrupted because of no heap memory.
  * - [NRF_EPROTO] Request failed because DTLS context was serialized.
+ * - [NRF_EBUSY] Earlier send request with the @ref NRF_SO_SENDCB socket option set is still
+ *               ongoing.
  */
 ssize_t nrf_send(int socket, const void *buffer, size_t length, int flags);
 
@@ -881,6 +932,8 @@ ssize_t nrf_send(int socket, const void *buffer, size_t length, int flags);
  * - [NRF_ECANCELED] Operation canceled because of APN rate control.
  * - [NRF_ENOMEM] TCP stream interrupted because of no heap memory.
  * - [NRF_EPROTO] Request failed because DTLS context was serialized.
+ * - [NRF_EBUSY] Earlier send request with the @ref NRF_SO_SENDCB socket option set is still
+ *               ongoing.
  */
 ssize_t nrf_sendto(int socket, const void *message, size_t length, int flags,
 		   const struct nrf_sockaddr *dest_addr, nrf_socklen_t dest_len);