[nrf noup] platform: nordic_nrf: Fix SPU include for 54l

fixup! [nrf noup] platform: nordic_nrf: Add support for 54l

Include the SPU header for the NRF54L which it does not
have the define NRF_SPU.

Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>

Author: Vge0rge

platform/ext/target/nordic_nrf/common/core/cmsis_drivers/Driver_USART.c

@@ -28,7 +28,7 @@
 #define ARRAY_SIZE(arr) (sizeof(arr)/sizeof(arr[0]))
 #endif
 
-#if !(DOMAIN_NS == 1U) && defined(CONFIG_TFM_LOG_SHARE_UART) && defined(NRF_SPU)
+#if !(DOMAIN_NS == 1U) && defined(CONFIG_TFM_LOG_SHARE_UART) && (defined(NRF_SPU) || defined(NRF_SPU00))
 #define SPU_CONFIGURE_UART
 #include <spu.h>
 #endif

platform/ext/target/nordic_nrf/common/core/target_cfg.c

@@ -872,6 +872,9 @@ enum tfm_plat_err_t init_debug(void)
     return TFM_PLAT_ERR_SUCCESS;
 }
 
+#define NRF_UARTE_INSTANCE(id) NRF_UARTE ## id
+#define NRF_UARTE_INSTANCE_GET(id) NRF_UARTE_INSTANCE(id)
+
 /*----------------- NVIC interrupt target state to NS configuration ----------*/
 enum tfm_plat_err_t nvic_interrupt_target_state_cfg(void)
 {
@@ -893,26 +896,8 @@ enum tfm_plat_err_t nvic_interrupt_target_state_cfg(void)
 #endif
 
 #ifdef SECURE_UART1
-#if NRF_SECURE_UART_INSTANCE == 0
-    /* UARTE0 is a secure peripheral, so its IRQ has to target S state */
-    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE0));
-#elif NRF_SECURE_UART_INSTANCE == 1
-    /* UARTE1 is a secure peripheral, so its IRQ has to target S state */
-    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE1));
-#elif NRF_SECURE_UART_INSTANCE == 30
-    /* UARTE30 is a secure peripheral, so its IRQ has to target S state */
-    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE30));
-#elif NRF_SECURE_UART_INSTANCE == 00
-    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE00));
-#elif NRF_SECURE_UART_INSTANCE == 20
-    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE20));
-#elif NRF_SECURE_UART_INSTANCE == 21
-    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE21));
-#elif NRF_SECURE_UART_INSTANCE == 22
-    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE22));
-#elif NRF_SECURE_UART_INSTANCE == 30
-    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE30));
-#endif
+    /* IRQ for the selected secure UART has to target S state */
+    NVIC_ClearTargetState(NRFX_IRQ_NUMBER_GET(NRF_UARTE_INSTANCE_GET(NRF_SECURE_UART_INSTANCE)));
 #endif
 
     return TFM_PLAT_ERR_SUCCESS;