tmp: Add logs to gppi init

Author: nordic-krch

soc/nordic/common/gppi_init.c

@@ -144,10 +144,11 @@ static int gppi_init(void)
 #if defined(CONFIG_NRFX_GPPI) && !defined(CONFIG_NRFX_GPPI_V1)
 
 /* For nrf54h20 GPPI requires that ironside communication is up so delay the initialization. */
-#define GPPI_INIT_STATE COND_CODE_1(IS_ENABLED(CONFIG_SOC_NRF54H20_CPUAPP), (POST_KERNEL), (EARLY))
+#define GPPI_INIT_STATE \
+	COND_CODE_1(IS_ENABLED(CONFIG_NRFX_GPPI_SD2PPI_GLOBAL), (POST_KERNEL), (EARLY))
 
 #define GPPI_INIT_PRIO                                                          \
-	COND_CODE_1(IS_ENABLED(CONFIG_SOC_NRF54H20_CPUAPP),                     \
+	COND_CODE_1(IS_ENABLED(CONFIG_NRFX_GPPI_SD2PPI_GLOBAL),                     \
 		    (UTIL_INC(CONFIG_IRONSIDE_SE_CALL_INIT_PRIORITY)), (0))
 
 SYS_INIT(gppi_init, GPPI_INIT_STATE, GPPI_INIT_PRIO);

soc/nordic/common/nrfx_gppi_sd2ppi_global.c

@@ -5,6 +5,7 @@
  */
 #include "nrfx_gppi_sd2ppi_global.h"
 #include <ironside/se/api.h>
+#include <zephyr/sys/printk.h>
 
 static nrfx_atomic_t channels[NRFX_GPPI_NODE_COUNT];
 static nrfx_atomic_t group_channels[NRFX_GPPI_NODE_DPPI_COUNT];
@@ -443,7 +444,13 @@ static int actual_channel_mask(nrfx_gppi_node_id_t node_id, uint32_t *ch_mask, b
 		entries_count++;
 		if ((entries_count == ARRAY_SIZE(entries)) || (in_mask == 0)) {
 			/* Read batch of registers. */
+			printk("Periphconf read: ");
+			for (int i = 0; i < entries_count; i++) {
+				printk("reg: %08x, ", entries[i].regptr);
+			}
+			printk("\n");
 			status = ironside_se_periphconf_read(entries, entries_count);
+			printk("Periphconf read result: %d\n", status.status);
 			if (status.status == 0) {
 				for (uint32_t i = 0; i < entries_count; i++) {
 					/* If SPU register has default value assume that channel