Can't use any USB wireless card with v3.3.0-r1

[vatprcyq]

Installed [v3.3.0-r1] but inserted usb wireless adapters lsusb -tv shows driver=[none] and iwconfig show no new interfaces
Tried "Loading chipset drivers" and test builds from channel
rmmod and insmod still not working at usb but interal cards "wlan0" is working for monitor mode


dmesg attached Tested for RTL8188CU RT5572 RT3070 and RTL8812
dmesg.txt

[vatprcyq]

Try with 2.0.0-r2 still not working at USB
some outputs:
(root㉿kali)-[~]
└─# uname -a
Linux kali 5.15.167-android13-EmberHeart #1 SMP PREEMPT Thu Jan 1 17:58:21 UTC 2026 aarch64 GNU/Linux

┌──(root㉿kali)-[~]
└─# zcat /proc/config.gz | grep -iE "80211|WIRELESS" | head -20
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y

CONFIG_CFG80211 is not set

CFG80211 needs to be enabled for MAC80211

CONFIG_MAC80211_STA_HASH_MAX_SIZE=0

Wireless WAN

end of Wireless WAN

CONFIG_USB_SERIAL_SIERRAWIRELESS is not set

┌──(root㉿kali)-[~]
└─# zcat /proc/config.gz | grep -iE "MT" | head -20

CONFIG_OPLUS_SCHED_MT6895 is not set

CONFIG_SCHED_SMT is not set

CONFIG_ARM64_AS_HAS_MTE=y
CONFIG_ARM64_MTE=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y

CONFIG_BT_HCIBTUSB_MTK is not set

CONFIG_BT_MTKSDIO is not set

CONFIG_BT_MTKUART is not set

CONFIG_GNSS_MTK_SERIAL is not set

CONFIG_MTD is not set

CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set

CONFIG_WLAN_VENDOR_ADMTEK is not set

CONFIG_TOUCHSCREEN_MTOUCH is not set

CONFIG_I2C_SIMTEC is not set

CONFIG_MFD_INTEL_PMT is not set

┌──(root㉿kali)-[~]
└─# zcat /proc/config.gz | grep -iE "ATH" | head -20
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"

CONFIG_IP_ROUTE_MULTIPATH is not set

CONFIG_BT_HCIUART_ATH3K is not set

CONFIG_BT_ATH3K is not set

CONFIG_DM_MULTIPATH is not set

CONFIG_NET_VENDOR_ATHEROS=y

CONFIG_WLAN_VENDOR_ATH is not set

CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_KSU_SUSFS_SUS_PATH=y

CONFIG_SECURITY_PATH is not set

CONFIG_STATIC_USERMODEHELPER_PATH=""

CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set

┌──(root㉿kali)-[~]
└─# lsmod | grep -E 80211
mac80211 1355776 0
cfg80211 1462272 2 kiwi_v2,mac80211

┌──(root㉿kali)-[~]
└─# lsmod | grep -E "80211"
mac80211 1355776 0
cfg80211 1462272 2 kiwi_v2,mac80211
lsusb -tv
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 001: Dev 002, If 0, Class=Vendor Specific Class, Driver=[none], 480M
ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless Adapter
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 10000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
lsusb -tv
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 001: Dev 003, If 0, Class=Vendor Specific Class, Driver=[none], 480M
ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 10000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
lsusb -tv
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 001: Dev 005, If 0, Class=Vendor Specific Class, Driver=[none], 480M
ID 0409:0408 NEC Corp.
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 10000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 001: Dev 002, If 0, Class=Vendor Specific Class, Driver=[none], 480M
ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 10000M
ID 1d6b:0003 Linux Foundation 3.0 root hub

/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 001: Dev 002, If 0, Class=Vendor Specific Class, Driver=[none], 480M
ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 10000M
ID 1d6b:0003 Linux Foundation 3.0 root hub

dmesg 2.0.0-r2 5.15.167-android13-EmberHeart #1 SMP PREEMPT Thu Jan 1 17:58:21 UTC 2026 aarch64 GNU/Linux
https://github.com/nullptr-t-oss/EmberHeart_OnePlus11/releases/download/v2.0.0-r2/EmberHeart_boot.img

dmesg2.0.0.r2.txt

[nullptr-t-oss]

Did you follow this exact module loading strategy?

If yes, please send the dmesg output of the following command :

dmesg -w | grep -iE "unknown|symbol|ath|mac80211"

Also cfg80211 and mac80211 are not enabled in gki-kernel, because it is compiled from msm-kernel.
You can check that for yourself by using the following command :

lsmod | grep -iE "mac80211|cfg80211"

[vatprcyq]

Did you follow this exact module loading strategy?

If yes, please send the dmesg output of the following command :

dmesg -w | grep -iE "unknown|symbol|ath|mac80211"

Also cfg80211 and mac80211 are not enabled in gki-kernel, because it is compiled from msm-kernel. You can check that for yourself by using the following command :

lsmod | grep -iE "mac80211|cfg80211"

Try for this AR9271 is OK but do you have modules for rt2800usb? RT3070/RT5572 need this
and MT7610/MT7612 not working at all loading modules begin mt*
realtek also loaded rtw_core rtw_usb and rtw_88... 8812 8192 still not ok for this
Newest kernel today at channel

[  517.277576] [T107142] type=1400 audit(1788160509.854:2083): avc:  denied  { getattr } for  comm="kdevtmpfs" path="/bus/usb/001/002" dev="devtmpfs" ino=301 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  540.320526] [T620713] usbcore: registered new interface driver ath10k_usb
[  542.623122] [T107142] type=1400 audit(1788160670.719:2088): avc:  denied  { open } for  comm="cryptoeng@1.0-s" path="/proc/17935/cmdline" dev="proc" ino=177989 scontext=u:r:hal_cryptoeng_oplus:s0 tcontext=u:r:untrusted_app:s0:c204,c256,c512,c768 tclass=file permissive=1
[  542.624176] [T107142] type=1400 audit(1788160670.719:2089): avc:  denied  { getattr } for  comm="cryptoeng@1.0-s" path="/proc/17935/cmdline" dev="proc" ino=177989 scontext=u:r:hal_cryptoeng_oplus:s0 tcontext=u:r:untrusted_app:s0:c204,c256,c512,c768 tclass=file permissive=1
[  564.921844] [ T7142] type=1400 audit(1788160693.015:2096): avc:  denied  { getattr } for  comm="kdevtmpfs" path="/bus/usb/001/002" dev="devtmpfs" ino=310 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  577.132409] [T220289] usb 1-1: Manufacturer: ATHEROS
[  577.142391] [T220289] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[  577.145113] [T220289] usb 1-1: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[  577.145134] [T220289] usb 1-1: Falling back to sysfs fallback for: ath9k_htc/htc_9271-1.4.0.fw
[  577.158619] [T321003] ueventd: firmware: loading 'ath9k_htc/htc_9271-1.4.0.fw' for '/devices/platform/soc/a600000.ssusb/a600000.dwc3/xhci-hcd.4.auto/usb1/1-1/firmware/ath9k_htc!htc_9271-1.4.0.fw'
[  577.159270] [T321003] ueventd: found /etc/firmware/ath9k_htc/htc_9271-1.4.0.fw for /devices/platform/soc/a600000.ssusb/a600000.dwc3/xhci-hcd.4.auto/usb1/1-1/firmware/ath9k_htc!htc_9271-1.4.0.fw
[  577.159768] [T321003] ueventd: loading /devices/platform/soc/a600000.ssusb/a600000.dwc3/xhci-hcd.4.auto/usb1/1-1/firmware/ath9k_htc!htc_9271-1.4.0.fw took 1ms
[  577.455200] [T220289] usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[  577.709491] [T220289] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits
[  578.023997] [T220289] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4
[  578.024018] [T220289] ath9k_htc 1-1:1.0: FW RMW support: On
[  578.024030] [T220289] ath: EEPROM regdomain: 0x0
[  578.024041] [T220289] ath: EEPROM indicates default country code should be used
[  578.024048] [T220289] ath: doing EEPROM country->regdmn map search
[  578.024059] [T220289] ath: country maps to regdmn code: 0x3a
[  578.024067] [T220289] ath: Country alpha2 being used: US
[  578.024074] [T220289] ath: Regpair used: 0x3a
[  578.035565] [T220289] ieee80211 phy1: Atheros AR9271 Rev:1
[  596.538474] [T120284] usb 1-1: ath9k_htc: USB layer deinitialized
[  596.541294] [T207142] type=1400 audit(1788160813.250:2101): avc:  denied  { getattr } for  comm="kdevtmpfs" path="/bus/usb/001/003" dev="devtmpfs" ino=311 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  709.268254] [T107142] type=1400 audit(1788160952.892:2105): avc:  denied  { getattr } for  comm="kdevtmpfs" path="/bsg/1:0:0:0" dev="devtmpfs" ino=322 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  719.801656] [ T7142] type=1400 audit(1788160963.428:2109): avc:  denied  { getattr } for  comm="kdevtmpfs" path="/bus/usb/001/003" dev="devtmpfs" ino=323 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  791.450466] [ T7142] type=1400 audit(1788161049.573:2113): avc:  denied  { getattr } for  comm="kdevtmpfs" path="/bus/usb/001/003" dev="devtmpfs" ino=335 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  809.944052] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_set_hif_suspend (err -2)
[  809.944164] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_set_deep_sleep (err -2)
[  809.944469] [T521263] mt7921e: Unknown symbol mt76_connac_pm_wake (err -2)
[  809.944537] [T521263] mt7921e: Unknown symbol mt76_connac_power_save_sched (err -2)
[  809.944660] [T521263] mt7921e: Unknown symbol mt76_connac_pm_dequeue_skbs (err -2)
[  809.944878] [T521263] mt7921e: Unknown symbol mt76_connac_free_pending_tx_skbs (err -2)
[  809.944957] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_uni_add_dev (err -2)
[  809.945038] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_alloc_sta_req (err -2)
[  809.945100] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_sta_ba (err -2)
[  809.945162] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_get_nic_capability (err -2)
[  809.945227] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_sta_cmd (err -2)
[  809.945301] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_coredump_event (err -2)
[  809.945368] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_add_nested_tlv (err -2)
[  809.945433] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_patch_sem_ctrl (err -2)
[  809.945500] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_init_download (err -2)
[  809.945564] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_start_patch (err -2)
[  809.945636] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_start_firmware (err -2)
[  809.945727] [T521263] mt7921e: Unknown symbol mt76_connac_wowlan_support (err -2)
[  809.945822] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_set_mac_enable (err -2)
[  809.945881] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_set_channel_domain (err -2)
[  809.945942] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_set_rate_txpower (err -2)
[  809.946005] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_uni_add_bss (err -2)
[  809.946088] [T521263] mt7921e: Unknown symbol mt76_connac_pm_queue_skb (err -2)
[  809.946147] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_set_suspend_iter (err -2)
[  809.946222] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_update_arp_filter (err -2)
[  809.946282] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_update_gtk_rekey (err -2)
[  809.946341] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_hw_scan (err -2)
[  809.946400] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_cancel_hw_scan (err -2)
[  809.946458] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_sched_scan_req (err -2)
[  809.946517] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_sched_scan_enable (err -2)
[  809.946576] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_set_rts_thresh (err -2)
[  809.946635] [T521263] mt7921e: Unknown symbol mt76_connac_sta_state_dp (err -2)
[  809.946736] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_sta_update_hdr_trans (err -2)
[  809.946924] [T521263] mt7921e: Unknown symbol mt76_connac_mcu_chip_config (err -2)
[  817.899158] [T107142] type=1400 audit(1788161079.389:2118): avc:  denied  { getattr } for  comm="kdevtmpfs" path="/bsg/1:0:0:0" dev="devtmpfs" ino=338 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  972.858822] [T421434] rtw_88xxa: unknown parameter 'rtw_8703b' ignored
[  972.858839] [T421434] rtw_88xxa: unknown parameter 'rtw_8723cs' ignored
[  972.858842] [T421434] rtw_88xxa: unknown parameter 'rtw_8723d' ignored
[  972.858845] [T421434] rtw_88xxa: unknown parameter 'rtw_8723de' ignored
[  972.858848] [T421434] rtw_88xxa: unknown parameter 'rtw_8723ds' ignored
[  972.858850] [T421434] rtw_88xxa: unknown parameter 'rtw_8723du' ignored
[  972.858852] [T421434] rtw_88xxa: unknown parameter 'rtw_8723x' ignored
[  972.858854] [T421434] rtw_88xxa: unknown parameter 'rtw_8812a' ignored
[  972.858856] [T421434] rtw_88xxa: unknown parameter 'rtw_8812ae' ignored
[  972.858858] [T421434] rtw_88xxa: unknown parameter 'rtw_8812au' ignored
[  972.858860] [T421434] rtw_88xxa: unknown parameter 'rtw_8814a' ignored
[  972.858862] [T421434] rtw_88xxa: unknown parameter 'rtw_8814ae' ignored
[  972.858864] [T421434] rtw_88xxa: unknown parameter 'rtw_8814au' ignored
[  972.858866] [T421434] rtw_88xxa: unknown parameter 'rtw_8821a' ignored
[  972.858867] [T421434] rtw_88xxa: unknown parameter 'rtw_8821ae' ignored
[  972.858869] [T421434] rtw_88xxa: unknown parameter 'rtw_8821au' ignored
[  972.858871] [T421434] rtw_88xxa: unknown parameter 'rtw_8821c' ignored
[  972.858872] [T421434] rtw_88xxa: unknown parameter 'rtw_8821ce' ignored
[  972.858874] [T421434] rtw_88xxa: unknown parameter 'rtw_8821cs' ignored
[  972.858876] [T421434] rtw_88xxa: unknown parameter 'rtw_8821cu' ignored
[  972.858877] [T421434] rtw_88xxa: unknown parameter 'rtw_8822b' ignored
[  972.858879] [T421434] rtw_88xxa: unknown parameter 'rtw_8822be' ignored
[  972.858881] [T421434] rtw_88xxa: unknown parameter 'rtw_8822bs' ignored
[  972.858882] [T421434] rtw_88xxa: unknown parameter 'rtw_8822bu' ignored
[  972.858884] [T421434] rtw_88xxa: unknown parameter 'rtw_8822c' ignored
[  972.858886] [T421434] rtw_88xxa: unknown parameter 'rtw_8822ce' ignored
[  972.858887] [T421434] rtw_88xxa: unknown parameter 'rtw_8822cs' ignored
[  972.858889] [T421434] rtw_88xxa: unknown parameter 'rtw_8822cu' ignored
[ 1006.638503] [ T7142] type=1400 audit(1788161268.129:2122): avc:  denied  { getattr } for  comm="kdevtmpfs" path="/bus/usb/001/005" dev="devtmpfs" ino=339 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 1029.609275] [T621465] rtw_8812au: Unknown symbol rtw8812a_hw_spec (err -2)
[ 1062.081119] [T421497] rtw_8812au: Unknown symbol rtw8812a_hw_spec (err -2)

lsmod | grep -iE "mac80211|cfg80211"
mac80211             1318912  13 ath9k_htc,mt76,rtw_sdio,rtw_usb,rtw_core,mt7921e,ath9k,mt7915e,mt7601u,mt76_connac_lib,rtw_pci,mt7603e,ath10k_core
cfg80211             1462272  14 ath9k_htc,mt76,ath9k_common,rtw_core,kiwi_v2,mt7921e,ath9k,mt7915e,ath,mt7601u,mac8021,mt76_connac_lib,mt7603e,ath10k_core

Linux kali 5.15.180-android13-EmberHeart #6 SMP PREEMPT Mon Aug 31 05:56:47 UTC 2026 aarch64 GNU/Linux

[nullptr-t-oss]

You need to figure out what the 'top level' module depends on.

Example :

root [ /vendor_dlkm/lib/modules ]$ modinfo mac80211.ko
filename:       mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
depends:        cfg80211
intree:         Y
name:           mac80211
vermagic:       5.15.180-g10f39f91ae04 SMP preempt mod_unload modversions aarch64
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4).
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4).
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost.
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4).
parmtype:       ieee80211_default_rc_algo:charp
parmtype:       max_nullfunc_tries:int
parmtype:       max_probe_tries:int
parmtype:       beacon_loss_count:int
parmtype:       probe_wait_ms:int
scmversion:     g10f39f91ae04

From the line :

depends:        cfg80211

We can conclude that mac80211 depends on cfg80211, so before you load mac80211 you must ensure that cfg80211 is loaded.

Same for rtw modules.
Let's say you want drivers for rtl8812au ,

Do modinfo of rtw_8812au module, check depends , run modinfo on the dependent modules , repeat until you reach depends like : mac80211 or cfg80211 (which are already loaded)

Load from bottom to top
i.e. root modules first , then top module that depends on the root module and so on.

TLDR: If foo.ko depends on bar.ko which futher depends on baz.ko

• First check if baz.ko is loaded, if loaded load bar.ko's dependencies (if any)
• Then load bar.ko, then load load foo.ko's dependencies (if any)
• Then load foo.ko

Supported chipsets for rtw88

USB : RTL8723DU, RTL8811AU, RTL8811CU, RTL8812AU, RTL8812BU, RTL8812CU
USB : RTL8814AU, RTL8821AU, RTL8821CU, RTL8822BU, RTL8822CU

Note

mt76x modules are enabled and compiled, but due to a recent CI revamp (major), kernel modules are not being uploaded, I'll upload updated moudles soon. Since you're already present in the telegram group, I'll send the modules tar archive in general chat and ping you.

Important

If you don't have important data on your phone, please let me know because I need testers for dlkm & vendor boot partitions.
If it suceeds, you wont have to load modules manually!

Warning

Might cause bootloop & may require format data or clean flash, please backup your data and partitions if you want to participate

[vatprcyq]

You need to figure out what the 'top level' module depends on.

Example :

root [ /vendor_dlkm/lib/modules ]$ modinfo mac80211.ko
filename:       mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
depends:        cfg80211
intree:         Y
name:           mac80211
vermagic:       5.15.180-g10f39f91ae04 SMP preempt mod_unload modversions aarch64
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4).
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4).
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost.
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4).
parmtype:       ieee80211_default_rc_algo:charp
parmtype:       max_nullfunc_tries:int
parmtype:       max_probe_tries:int
parmtype:       beacon_loss_count:int
parmtype:       probe_wait_ms:int
scmversion:     g10f39f91ae04

From the line :

depends:        cfg80211

We can conclude that depends on , so before you load you must ensure that is loaded.mac80211``cfg80211``mac80211``cfg80211

Same for rtw modules. Let's say you want drivers for ,rtl8812au

Do of module, check , run on the dependent modules , repeat until you reach depends like : or (which are already loaded)modinfo``rtw_8812au``depends``modinfo``mac80211``cfg80211

Load from bottom to top i.e. root modules first , then top module that depends on the root module and so on.

TLDR: If depends on which futher depends on foo.ko``bar.ko``baz.ko

• First check if baz.ko is loaded, if loaded load bar.ko's dependencies (if any)
• Then load bar.ko, then load load foo.ko's dependencies (if any)
• Then load foo.ko

Supported chipsets for rtw88

USB : RTL8723DU, RTL8811AU, RTL8811CU, RTL8812AU, RTL8812BU, RTL8812CU
USB : RTL8814AU, RTL8821AU, RTL8821CU, RTL8822BU, RTL8822CU

Note

mt76x modules are enabled and compiled, but due to a recent CI revamp (major), kernel modules are not being uploaded, I'll upload updated moudles soon. Since you're already present in the telegram group, I'll send the modules tar archive in general chat and ping you.

Important

If you don't have important data on your phone, please let me know because I need testers for dlkm & vendor boot partitions. If it suceeds, you wont have to load modules manually!

Warning

Might cause bootloop & may require format data or clean flash, please backup your data and partitions if you want to participate

OK for test ,recently reflashed this phone